PAINTING, MARKING, PERIODICAL SERVICES, REPAIR TO ROOF OF HANGERS OF ARMY AVN SQN, STONE PITCHING AND MISC B/R RELATED WORKS UNDER GE NASIK ROAD.

Amount

M&L for complete removal of existing treatment to wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots;washing, removing nails,removing vegetation growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by waterproof crack sealing compound(premium quality as approved by GE) and applying two coat of exterior emulsion paint on walls surfaces. Note : for multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height which is included in quoted rate.

M&L for complete removal of existing treatment to wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots;washing, removing nails,removing vegetation growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by waterproof crack sealing compound(premium quality as approved by GE) and applying one coat of exterior emulsion paint on walls surfaces. Note : for multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height which is included in quoted rate.

M&L for two coats of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down, stopping and complete removal of old distempered surface etc.

M&L for 3mm thick wall care putty on wall.

M&L for one coat of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down , stopping and complete removal of old distempered surface etc.

M&L for One coat of distemper oil emulsion white or tinted on ceilings over a coat of primer, including preperation of surfaces by washing, rubbing down and stoppingand complete removal of old distempered surface etc.

M&L for One coat of synthetic enamel paint on old painted steel or iron surfaces of any description over 10cm width or girth including preparation of surface.

M&L for painting lines,dashes, arrow letters etc on road pavement, parade ground and applying 2mm thick road marking strips (reflective ) of specified shade/colour using hot thermoplastic material by fully/semi automatic application machine fitted with profile stone heater driven by experienced operator on road surfaces including preparation of previously treated surfaces, cleaning surfaces of all dust, scales oils grease and foreign materials etc complete all as specified and directed.

M&L for Painting lines, dashes, arrows, letters, and painting dispersal area etc. on roads, concrete pavements and the like exc 10cm wide with two coat of water based paint, white or golden yellow including preparation of new or previously treated surfaces to receive the painting. (Painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If necessary, the surface shall be repainted by one or more coats until the desired result is obtained.)

Taking down carefully (copper/aluminium) point wiring in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall as per specifications and drawing

Dismantling Pre-painted galvalume aluminum, CGI corrugated and plain sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets (at any height / any location ) complete all as specified and directed.

Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed.

Refixing old any thickness pre-painted galvalume aluminum, CGI corrugated sheet with two corrugations side lap, fixed with coach screws and washers, in roofs, after repair of roof (at any height / any location ) etc.complete all as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws (at any height / any location ) complete all as specified and directed.

S&F for 3 mm fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall (at any height / any location ) complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridges fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

M&L for preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats sythetic enamel paint with one coat of 'H' primer as directed by Engr-in-charge inclnecessary scaffolding and other safety arrangement to work at any height at site if required.

Dismantling PVC (SWR) pipe any size and in any position complete all as directed by Engr-in-Charge.

S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110mm PVC (SWR) bends any radius.

S&F for 110mm PVC (SWR) branch piece, single (single Y) equal or unequal.

Excavation in post holes (or similar holes) each in n exc 0.5 cum getting out and removing surplus soil to a distance in n exc 50 m and making good surface in soft/loose soil complete all as specified and as directed.

S&F for roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A all as specified and directed.

S&F for steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

M&L for pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregates as in cover slab/MH cover complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for brick masonry with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.

M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.

M&L for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

M&L for boulder pitching laid dry, hand packed tightly and pitching is grouted with cement and sand mortar 1:6 all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)

M&L for 75mm thick PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed

Taking down carefully existing bituminous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge where ever require.quotated rate shall be deem to be inclusive of complete removal of swollen plaster and concrete wherever directed by engr-in-charge and removing rubbish out of defence land. Note:work is to be executed at any height and situation.

Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.

Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops,ridge, padding,rounded or chamfered on edges.

M&L for rendering 15mm thick(minimum) in CM 1:4 with intergral waterproofing compound (200 ml per bag of cement used) on roof surfaces,parapets,facias etc . Note: waterproofing compound shall be measured and paid separately.

Supplying only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for applying evenly a coat of hot blown bitumen grade 85/25 over roof,facia,parapet surfaces at the rate 1.20kg per sqm for fixing app membrane etc including cleaning surfaces. Note:make same as for app membrane.

M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (b) APP membrance,Primer and bitumastic aluminium paint and bitumen shall be of same brand. (c) For vertical surfaces of parapet,wall etc app membrane shall be tucked into groove and sealed with silicon sealant(full width/depth of groove) i.e. "Dowsil 789 weatherproof silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately. Note:work is to be executed at any height and situation.

M&L for applying two coats of solar reflective bitumastic aluminium paint at the rate 0.15 kg per sqm per two coats over exposed app membrance surfaces(old/new) including cleaning of surfaces to the entire satisfaction of ground executives. Make: same as of app membrane.Note:work is to be executed at any height and situation.

Disconnecting existing tanks exc 250 n exc 500, ltrs setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note:work is to be executed at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000, lts setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note:work is to be executed at any height and situation.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 21,050.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

sunway associates (BID ID -3068866)

Vinod Enterprises (BID ID -3078400)

M/S SAMEER SUBHASH PATANI (BID ID -3077061)

MAHIMA CONSTRUCTION (BID ID -3068086)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

sunway associates

Vinod Enterprises

Abhiraj Enterprises