Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC Awarded Being Lowest Bidder | |
| 2 | L2₹31.5 L+₹36,900 (1.19%)Rejected-AOC PLOT NO 4 SUDARSHAN ROW RESIDENCY GAWADE MALA PIPELINE ROAD SAVEDI AHMEDNAGAR 414003 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414003 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹31.6 L+₹46,550 (1.50%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹32.5 L+₹1.4 L (4.55%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹43.2 L+₹12.1 L (38.9%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Repair / Replacement and maintenance of street lights at MH EME Workshop AC Records GE (N) MD accn FAFA MD accn BTR Vijay line under GE (N) Ahmednagar
2022_MES_543784_1
8668 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat b(i)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Ahmednagar
₹60,000
Yes
12 Sept 2022
6 Aug 2022
5 Sept 2022
6 Aug 2022
3 Sept 2022
19 Aug 2022
Amount
Excavating in trenches n exc 1.5 mtr wide and n exc 1.5m in depth , for foundation ,etc or for shafts, wells , cesspits, main holes etc.n exc 10 sqm on plan and n exc 1.5 mtr depth and getting out on soft/ lose soil etc complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading , levelling , watering and well ramming in layers not exc 25cm of any soil etc complete all as specified and directed by Engineer-in-Charge.
Supply and Lay HDPE pipe 63 mm dia for laying of LT cables etc complete with all accessores etc complete all as specified and directed by Engineer-in-Charge. Make: Vectus Industries/ Supreme/Infra/Astron Plastic
Removing excavated materials(soils) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point etc complete all as specified and directed by Engineer-in-Charge.
Taking out existing unserviceable UG Cable by disconnecting of connections and Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG cable 1100 Volts, heavy duty XLPE insulated, screened, PVC bedded, galvanised steel strip or wired armoured with aluminium conductor after removing old one of following size:-
(a) 10 Sqmm 2 Core
(b) 10 Sqmm 4 Core
(c ) 16 Sqmm 4 Core
Supply and replacement of 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire, twin core cable flat or circular with size 4 Sqmm etc complete all as specified and directed by Engineer-in-Charge.
All as per Sl Item No 9 (here-in-before) but 10 Sqmm 2 Core
All as per Sl Item No 9 (here-in-before) but 16 Sqmm 2 Core
M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge
Material and labour in replacement of 50 mm dia GI Pipe light grade ISI Marked with all fittings laid in trenches , fixed to walls / poles with FI Clamps of size 40x5 mm etc complete all as specified and directed by Engineer-in-Charge.
M & L steel tubular poles, complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 Mtrs Long) including taking down existing pole etc complete all as specified and directed by Engineer-in-Charge.
Demolation of u/s cement contcrete in cooping etc complete all as specified and directed by Engineer-in-Charge.
M & L for PCC(1:3:6) type C-2 using 40mm grade stone aggregates as foundation of pole and similar work etc complete all as specified and directed by Engineer-in-Charge.
M & L for PCC (1:2:4) type C-2 using 40mm grade stone aggregates for coping and similar work etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement FRLS PVC insulated cables aluminium conductor, standard 4 Sqmm 2 Core, etc complete all as specified and directed by Engineer-in-Charge.
Dismantling and taking down carefully the defective Highmast light fittings from high mast pole by mechanically/ manually and removing the unseviceable light fitting from pole and supply and fixing led flood light 200 watt,lumen 20000 with 10 KV surge protection in built and reassembling the same pole , and refixing at its original location , including reconnections with suitable length and size of capper/Aluminium wire as per existing and testing / commissioning etc complete all as specified and directed by Engineer-in-Charge.
Lifting the Highmast pole 16 mtr height by crane from its own location with opening the nut boltt and washers , greasing the steel wire rope and fixing with pulley and reassembling and refixing at its orginal location, including reconnections and testing commissioning complete for smooth operations etc complete all as specified and directed by Engineer-in-Charge. Note: (i) Rate for Crane and labours is includes in Quoted rates. (ii) Rate of sundry items like grease, cotton waste, nut , bolt and washers is included in quoted rates.
Supply only three pole contactor coil suitable for L&T contactor,240V,50 Hz etc complete all as specified and directed by Engineer-in-Charge. Cat part No CS94980/CS94105 or equivalent makes mentioned in list of makes in Appendix `C'
Supply only three pole contactor L&T contactor,32/40 Amps, 240V,50 Hz or as per existing on site etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing isolater 32/40 Amps,240 volt, three pole etc complete all as specified and directed by Engineer-in-Charge.
M & L for painting of Street light poles (SWAN NECK) in two coats of aluminium paint and one coat of red oxide as primer including writing of pole nos etc complete all as specified and directed by Engineer-in-Charge.
M & L for painting of Street light poles tubular type 9 mtr long in two coats of aluminium paint over one coat of red oxide as primer after preparing the surface including writing of pole nos etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCB TPN, 63 Amps 10 KA breaking / rupturing capacity capacity 415 volt , 50 HZ conforming to IS 60898-1 including necessary connection with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge. Make : CAT No DSMSCTNFO63 OF Standard or equvalent makes mentioned in list of makes in Appendix `C'
Supply and fix in replacement of LED post top lantern 40 Watt, with spun aluminium canopy & die cast aluminium spigot with opal PMMA acrylic diffuser pre wired with all accessories including making necessary connections and make it functional etc complete all as specified and directed by Engineer-in-Charge. Make : Crompton cat Part No- LPTO-40-CDL or equvalent in Appx 'C'.
Supply and fix in replacement of timer switch analog FM/1 quartz, 240volt, 50/60 Hz 16 amp/250VAC resistive of etc complete all as specified and directed by Engineer-in-Charge. Make L&T of cat part No-J648B or equivalent makes mentioned in list of makes in Appendix `C'
Supply, fix in replacement of Contactor 3 pole AC -1 40 Amps Main Pole Confugration 2 No 2 NC 415 volt fixing with Existing Box by suitable size of copper cable with suitable size of lugs etc complete all as specified and directed by Engineer-in-Charge. Make L&T Cat Part No-SS90701 or equivalent makes mentioned in list of makes in Appendix `C'
S&F Shock Proof, Rust Proof, Fire Retradrant, Non-transparent Kiosks Pole Box of size 200 x 175 x100 mm made of Engineering Plastic on Piece moulding for Outdoor type, Heavy duty with 4 No. insulated Alunminium Bus-bar of 60 Amp capacity, mounted on Unbreakable Insulators MCB SP, 10 Amp, complete with Aluminium Lugs of suitable size upto 50 Sqmm including 2 No. Flat Iron 40x3mm Clamps with suitable size Mild Steel Bolts, Nuts & Washers, etc. including Taking down Unserviceable Pole Box of any description from any Height, etc complete all as specified and directed by Engineer-in-Charge.
S&F Shock Proof, Rust Proof, Fire Retradrant, Non-transparent Kiosks Pole Box of size 310x210x120mm made of Engineering Plastic on Piece moulding for Outdoor type, Heavy duty with 4 No. insulated Alunminium Bus-bar of 60 Amp capacity, mounted on Unbreakable Insulators MCB SP, 10 Amp, complete with Aluminium Lugs of suitable size upto 50 Sqmm including 2 No. Flat Iron 40x3mm Clamps with suitable size Mild Steel Bolts, Nuts & Washers, etc. including Taking down Unserviceable Pole Box of any description from any Height etc complete all as specified and directed by Engineer-in-Charge.
M & L for replcement of Chain sprocket in Highmast Light etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of brass batten holder for fixing of gate light etc complete all as specified and directed by Engineer-in-Charge. Make Anchor
Supply and fixing in replacement of Triple pole and Neutral HRC type rewireable Swich fuse unit 63 Amp 415 volt AC 23 A 50 HZ conforming to IS 60947 1 & 3 fixing on Street light Pole with 32x4mm of MS Clamp and suitable size of nut, bolt and washers etc complete all as specified and directed by Engineer-in-Charge. Cat Part No-#DTPN063 of Indoasian or equivalent makes mentioned in list of makes in Appendix `C'
Supply and fixing in replacement of Triple pole and Neutral HRC type rewireable Swich fuse unit 100 Amp 415 volt AC 23 A 50 HZ conforming to IS 60947 1 & 3 fixing on Street light Pole with 32x4mm of MS Clamp and suitable size of nut, bolt and washers etc complete all as specified and directed by Engineer-in-Charge. Cat Part No-#DTPN063 of Indoasian or equivalent to C&S/ Standard.
M&L Heat shrinkable straight through joint, with including jointing materials and necessary earth work suitable for 1100 Volts , XLPE LT cable of size 16-25 sq.mm, 3.5/4 core, including fixing, jointing and testing etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs change over switch existing panel, wall or LT pole of any size and any type on load type, triple pole and neutral, 63 Amps, 415 V, 50 Hz front handle operated, including connecting and testing etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs change over switch existing panel, wall or LT pole of any size and any type on load type, triple pole and neutral, 100 Amps, 415 V, 50 Hz front handle operated, including connecting and testing etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing with replacement of MCB SP 6 to 32 Amps with PVC Enclouser fixing with pole or wall for individual street light/ security light control with suitable size of clamp nut, bolt and washers etc complete all as specified and directed by Engineer-in-Charge. make stanard, cat part No-DSMSCSPF006-032 or equivalent makes mentioned in list of makes in Appedix `C' Note: Rate of MS Clamp is include in Quoted Rates.
M&L Street Light Fitting Bracket made out from GI Pipe more than 20 mm upto 50 mm Bore (dia), Light Grade, not exc. 1.20 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x5mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works incuding taking down existing etc complete all as specified and directed by Engineer-in-Charge.
M&L Outdoor type bus bar LT panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos aluminium bus bar, of capacity 400 Amps fabricated in factory having modern fabrication facility duly powder coated painting, dust and vermin proof, degree of protection not less than IP-55, the panel shall be made out of 3.00mm thick CRCA mild steel sheet, front door (01 layer) and rear door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level including installation, commissioning, testing and necessary PCC work etc complete all as specified and directed by Engineer-in-Charge. (a) Aluminium Bus-bar 4 Strip, 400 Amp, 415 Volt - 01 Set (b) MCCB 100 Amp - 01 No, 4 Pole, 16 KA (Incoming) (c) MCB 63 Amp, TPN, 16 kA, 415 Volt - 05 No. (d) All outgoing MCBs shall be connected through HRC fuse
Material and labour for street light control board / box of size 0.50 X 0.50 X 0.20 m made out of 1.60 mm thick MS sheet fixed / mounted on pole by means of 2 Nos of FT clamps of size 25 X 3 mm comprising the following enclousers and connecting with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge :- a) MCB, TPN, 40 Amps, - 01 No MAKE: CAT No DSMSCTNF040 OF STANDARD OR equivalent in makes mentioned in list of makes in Appendix `C' b) Timer switch, eletronic, ET 100 operating on 110 / 240 / 415 Volts, 50 Hz MAKE: CAT No SE92006 OF L&T OR equivalent in makes mentioned in list of makes in Appendix `C' c) Contactor ML 2, 32 Amps,415 Volt - 01 No MAKE: CAT No SS90701 OF L&T OR equivalent in makes mentioned in list of makes in Appendix `C' d) All MCB,Contactor should be connected through HRC fuse
Taking out Old existing security leight (HPSV/Tube light fitting) and Supply and fix in replacement of LED Street light Luminaries 70 watt, with inbuilt surge protection 10 KV, Lumans output 6000 with pressure die-cast aluminium housing with toughtened glass & IP 66 protection and impact resistance IK07 fixed with suitable size of GI Bracket of length 1.2 Mtr,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box to streeght light and 4 sqmm 2 core aluminium service cable pvc insulated 2.5 RM per fitting where over head line existing for connection of street light to over head conductor etc complete all as specified and directed by Engineer-in-Charge. Note :Manufactur warrenty should be 5 years for street light from installation date.
Taking out Old existing security leight (HPSV/Tube light fitting) and Supply and fix in replacement of LED Street light Luminaries 60 watt, with inbuilt surge protection 10 KV, Lumans output 6000 with pressure die-cast aluminium housing with toughtened glass & IP 66 protection and impact resistance IK07 fixed with suitable size of GI Bracket of length 1.2 Mtr,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box to streeght light and 4 sqmm 2 core aluminium service cable pvc insulated 2.5 RM per fitting where over head line existing for connection of street light to over head conductor complete all as specified and directed. Note :Manufactur warrenty should be 5 years for street light from installation date etc complete all as specified and directed by Engineer-in-Charge.
Taking out Old existing security leight (HPSV/Tube light fitting) and Supply and fix in replacement of LED Street light Luminaries 45 watt, with inbuilt surge protection 10 KV, Lumans output 4500 with pressure die-cast aluminium housing with toughtened glass & IP 66 protection and impact resistance IK07 fixed with suitable size of GI Bracket of length 1.2 Mtr,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box to streeght light and 4 sqmm 2 core aluminium service cable pvc insulated 2.5 RM per fitting where over head line existing for connection of street light to over head conductor complete all as specified and directed.Note :Manufactur warrenty should be 5 years for street light from installation date etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 25 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED surg protectors for 25 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 30 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED surg protectors for 30 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 60/65 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED surg protectors for 45/60 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 70/75 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 120 watt LED flood light Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED surg protectors for 120 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED surg protectors for 200 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply only in replacemet LED Drivers for 200 watt LED flood light Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of LED bollard light 9 watt, 600 mm long, Mushroom shaped,with B22/E27 bulb holder,suitable for LED bulb with B22/E27 caps,with cast aluminium housing and polymer diffuser for pleasant light output ,weather proof, IP65 including excavation for foundation of size 250 x 250 x300 mm and PCC (1:2:4) of same size with hole in basement for power supply for light ,place a conduit in hloe of suitable size and three anchor bolts to screwing and fixing of base plateand set them into concrete etc complete all as specified and directed by Engineer-in-Charge. Note: (i) Rate of PCC included in quated rate (ii) Rate of LED bulb B22 9/10 watt with holder is included in quated rate.
Supplied and fix rigid non metallic PVC conduit exclusive of boxes but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as coupler ,lock ,nuts etc of size 40 mm etc com[plete all as specified and directed by Engineer-in-Charge.
Supply & fixing lamp holder (Straight), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair of chain link fencing 4mm thick mild steel wires, mesh, size 50mm of any type of standards, rails, straining bolts, including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge.
Supply , fixing and testing Solar LED street light fitting complete having solar photo voltaic module 100 x 2 Wp system where 45 Watts LED lamp operates for stipulated time everyday without any human intervention work on auto electronic controller, including providing Battery 24 V, 120 Ah (Tubular plate Lead Acid battery) and electronic system with tamper proof MS box with corrosion resistance paint suitable for battery , bend pipe and camps suitable for mounting lamps fixtures complete including providing tubulor GI pole 20 feet designed to specifycally for Solar light fitting including PCC work , foundation, earth work including suitable size of cable etc complete all as specified and directed by Engineer-in-Charge. Make-Havells, Modal No 45W Solar SLS,HSN Code.8541 or equivalent makes mentioned in list of makes in Appendix `C'
M & L for repairing of Highmast panel box by replacing of MCB TPN, Timer switch, Contactor and also repairing the Panel box by welding of hinges, replacement of Lock etc complete all as specified and directed by Engineer-in-Charge. Note: (i) MCB TPN, Timerswitch and Contactor are paid separately. (ii) Rate Includes welding,Lock and keys , Painting in two coats of synthetic enamail and one coat of primer red oxide,
Supply and fix in replacement of MS Clamp 25x3mm with nut bolts and washers duely painted in two coats of aluminium paint and one coat of red oxide etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of copper conductor XLPE insulated stranded , unarmoured ,extructed PVC type ST2 sheathed , 650/1100 volt graded as per IS 7098.of size 6 Sqmm 4 Core etc complete all as specified and directed by Engineer-in-Charge. Make Polycab cat part No- SISLV4X610693 or equivalent makes mentioned in list of makes in Appendix `C'
Supply and fix in replacement of steel wire rope Grade AISI 316, 7/19 with 6mm dia etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of copper conductor PVC insulated stranded , unarmoured , 650/1100 volt graded as per IS 7098.of size 4 Sqmm 5 Core etc complete all as specified and directed by Engineer-in-Charge.
M & L for replcement of Chain sprocket in Highmast Light etc complete all as specified and directed by Engineer-in-Charge.
An amount of Rs 48,205.00 shall be deducted from BOQ on account of schedule of credit
Maruti Abhiyantriki
Ms. S.K. ASSOCIATES
Mahindra Electric Stores
vedant engineering enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .