Agastheeswaram Town Panchayat -Amruth2.0-Park

Amount

COMPOUND WALL

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification - 1m3 For Drainage

Plain cement concrete Using 1:4:8 mix ( One cement , four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36

Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C- 10m3

Plastering in cement mortar 1:4 (one cement Four sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MoRTH Specification: Clause:1000/1300]

Supply and fixing of mild steel grill works for windows, ventilators, etc including redoxide priming coat and cost of materials and all labour charges etc. complete.

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

FOOT PATH

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification - 1m3 For Drainage

Plain cement concrete Using 1:4:8 mix ( One cement , four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36

Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying Cement concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of 63mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification.

PLAY MATERIALS ARRANGEMENTS

Supply and fixing of swing 2 seater with Rubber Seat:- A-Frame: 1.5" Galvanished B Seats: Ruber,Chain: 8mm Stainless Steelclass pipe, Chain (grade- 304) Painting with PU coating Product Area: 10ft x 9ft Play Area: 15ft x 15ft.

Supply and fixing of Wave Slide 8ft FRP: (component) Ladder: Galvanished B class pipe sliding chute 9ft, BED LEG:Galvanished c class pipe,Height: 5ft, FRP thickness 4mm. (Reinforced polymers in 5 layers) 450CSM Matt, 600 Roving Mat, Isotolic gel coat with PU pigment. Painting with PU coating, Width:2ft (Required area) Product Area:2.5ft x 12ft.

Supply and fixing of See- Saw 4 Seater FRP:- Height: 1.5 ft Width:5ft, Frame: 1.5" Galvanished B class Pipe, See Saw Rail: 2" Galvanished C class Pipe, Seat: FRP Seat with 450 CSM Mat 3 Layers bonding, Isotolic gel coat with UV pigment. Painting with PU coating seat size: 15ft x 14ft product Area 5ft x 10ft play area:8ft x 12ft.

Supply and fixing of Merry Go Round - 6 Seater (FRP):- Height:3" Gi Pipe, 2.5mm thick, B class Seat Size: 15" x 14", Paint: Pu Coating.

LIGHTING ARRANGEMENTS

Supply, Erection of 4m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron

SEATING ARRANGEMENTS

Construction of Platform bench made of 100mm to 80mm thick single piece black granite slab 2.00m long and 0.45 to 0.40m wide chamfered machine polished on top and all sides and machine cut at bottom, supported on 2 Nos. of 100mm to 80mm thick black granite slabs of 0.50 x 0.45 to 0.40m size with semi circular cuts at sides and fully polished on all sides above platform level placed vertically with 0.15m buried in concrete 1:3:6 mix below platform surface, connecting the top slab and supports rigidly to correct line, level details as shown in the relevant sketch including demolition of cement concrete, earthwork wherever necessary, disposing all debris away from site with all leads and lifts etc. complete and as directed. (All labour, material, tools and plants including CEMENT by Contractor)

PLANTS ARRANGEMENTS

Planting Vambu,Pungai,Naue

D.PRABHAKAR (WORKS CONTRACTOR) (BID ID -1108100)