Repair and Restoration of Arulmigu ThennalakarThirukovil, Kovilkulam, Ambasamudram Taluk and Tirunelveli District.

Amount

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete

Pointing with Lime mortar 1:1.5 (One lime and One and Half sand ) including cost and conveyance of all materials and all labour charges etc complete complying with standard specification.

Scaffolding charges for Vimanans and gopurams with casurina posts coconut of palm trees whereever necessary for main, form work and providing with coonut keeth coverings, providing ladder arrangements, country wood plant for working, inspection etc., complete.

Upto 15' height

Upto 25' height

Clean removal of the existing Lime plastering from the Vimanam surfaces including clearing away from the site etc complete. (W-0103)

Providing vargapoochu over the corewalls of Vimanams/Gopurams, with Lime mortar 1:2 complete including shaping the mukhapathram, mahanasi, koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with LM 1:2 and finishing with final ornamental plastering and nayam threevai including cost and conveyacance of all materials, labour therefore, lifting of materials, all working in height, curing with water etc., complete including all extra for folding and including clearing the debris from the vimanams/ Gopuram - 100 sft, superficial area.

Upto 15' height

Upto 25' height

Painting with multicolour (Panchavaranam) good emulsion paints complete for the Vimanas/ Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in helghts, lifting of material cost of brushes etc., complete. - which include all extra for foldings -100 Sft. Superficial area.

Providing new sudhai vigrahams in the vimanams and Rajagoupurams with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:2 finishing the same with LM 1:1.5 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments weapons peedam etc., complete and providing CM nayam theervai wherever neceessary,inclusive of cost and conveyance of all materials, such as cement broken bricks, sand Copper. rods, binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornwmental costumes etc., as per prathima Lakshana, Vigraham height is measurable from the crown be adopted as detailed here under).

2' 6" to 3' 6" height

1' 0" to 2' 6" height

1' 6" to 2' 6" height

Dismantling the Existing damaged brick work in cement mortar including clearing away from the site etc complete.(W-0013)

Supply of cutstone members for carrying out Garpagraham,artha mandapam, Maha mandapam , Thirumathil and other Temple structures upto 10 feet length including cost and conveyance of all materials and all labour charges etc complete

Labour charges for Palamunai Dressing and Refixing the old pavukal, Uthiram Floor slab etc as directed and fixing the same in position with Combination mortar including all labour charges for dressing and fixing in posision as directed etc complete. For Wall

Brick work in Lime mortar 1:2 using quality of second class country bricks 8 3/4" x 4 1/2" x 2 3/4" for foundation and basement including curing , etc ., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Lime Mortar 1:2 , 12 mm thick including cost and conveyance of all materials and all labour charges etc complete

Supplying and fixing new Cutstone flooring using cut stone slab 600 x 600 mm and not less than 100mm thick top three line dressed and pointing with Lime mortar 1:1.5 etc complete (three line dressing)

Supplying temple type door using teak wood for scantling and planks including cost and conveyance of all materials and all labour charges etc complete Upto 7'00" Height

Supplying and fixing T.W Frames for Doors,Windows, Ventilators and other similar joinery works with the following sizesand sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc complete in all floors.

Supplying and fixing of Teak Wood Panelled door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

Best French (lac) polishing with1 coats S.I.360 to T.W. Doors,Windows, Ventilators, including cleaning the surfacesetc. complete complying with standard specifications.

Dismantling the Existing damaged Lime concrete including clearing away from the site etc complete. (W-0033)

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime, the proportion of brick jelly to lime being 32 to 12 ½ (No sand to be added) by volume and laid over the RCC roof slab in a single layer and consolidated to the finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc. complete complying with standard specification.

Finishing the Floor with Lime mortar 1:1.5 , 20mm thick including cost and conveyance of all materials and all labour charges etc complete.

Labour charges for removing the existing cutstone members including numbering , wire charges , tools and plants, scaffolding for working in heights etc complete. (PWD SOR 2023-24;Pg:173)

For thirumathil , Pavukal , Vyalavari (W-0216)

For Uthiram, Pothiyal and Pillar ( W-0217)

Ornamentel 'Brick work in Lime mortar 1:2 (one Lime and Two sand) using best quality Country Bricks of size 8 3/4"x 4 1/4"x 2 1/4" for walls incluing cost and convetance of all labour andmaterials including scaffolding curing finishingetc., complete complying with standard specification and as directed.etc., complete for Vimanams upto 15' 0" Height

Labour charges for Refixing the cutstone members including hire charges for tools and plants, scaffolding for working in heights and fixing in position including cost and conveyance of all materials and all labour charges etc complete.

Painting two coats with approved quality of water based exterior emulsion paint including one coat of priming coat in cement plastered wall surfaces in all floor including cost of all materials brushess, etc., scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers.

Earthwork excavation for foundation (for Open excavation) to full depth in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. For Plinth beam

Cement concrete M20 Grade using graded machine broken granite stone jelly for all reinforced cement concrete works excluding cost of centering shuttering strutting and cost of reinforcement grill in position including Plasticizer , cost of all materials and labour charges etc., complete .For Basement

Supplying fabricating and placing in position mild steel or ribbed for steel bar / rods for reinforcement grill for all RCC works including cost of steel and binding wire and labour charges for decoiling cutting binding and tying the grills etc complete complying with standard specification as directed by the departmental officers.

Random Rubble Masonry in cement mortar 1:5 [one cement and five sand] using new hard granite stones including providing new bond stones wherever necessary including simultaneous flush pointing of the exposed surface above ground level with the same mortar and all incidential charges such as scaffolding, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification.

Plastring with LM 1:1.5 ( One Lime , One and Half Sand ), 20mm thick including cost and conveyance of all materials and all labour charges etc complete.

Plastering with Lime mortar 1:1.5 , 12mm thick including cost and conveyance of all materials and all labour charges etc complete.

Painting two coats over Old wood work with best approved quality synthetic enamel paint including Removing existing paint from the surface by manual labour etc complete in all floors. The rate shall include cost of all materials, taxes, brushes, scaffolding charges and labour charges for painting etc. complete complying with standard specification. [The make and colour of paint to be used should be got approved by the departmental officers before use on works]

Supply and fixing of 2" x 1" Teakwood reeper on wall along with run of 50mm X 50mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall(Data-1)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips/cromption etc)(Data-2)

Supply and fixing of Havells LED lowbay 70W fitting with MS clamp set with bolt and nut and to be suspended with SS chain 32mm width with end hooles with PVC unsheathed copper leads from terminal to the fitting (Data-3)

Supply and fixing of 48W LED street light fitting with pressure diecase Aluminium housing with IP 65 Protection with 25 mm dia G.I. pipe and bend class-B complete on wall with PVC unsheathed copper leads MS clamps and Aluminium painting LED fittings should be Higher end /philips make(Data-4)

Supply and fixing of 48" AC Ceiling fan complete with stepped electronic 300w regulator with 1mt downrod and existing clamp(SD-107)

Supply and fixing of 450MM 18” Almonard Wall Fan on wall with connection (Data-5)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 14nos 6A 1 way switch and 2nos 6A Universal Plug with connections (Data-6)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 16nos 6A 1 way switch and 1no 6A Universal Plug with connections (Data-7)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 6nos 6A 1 way switch and 3nos 6A Universal Plug with connections (Data-8)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 10nos 6A 1 way switch and 1no 6A Universal Plug with connections (Data-9)

Supply and fixing of 4 module surface mounting box with combined cover plate plastic fixed with 2nos 6A 1 way switch and 1no 6A Universal Plug with connections (Data-10)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 6nos 6A 1 way switch and 6nos fan step regulator 100W 2 module with connections (Data-11)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 4nos 6A 1 way switch and 4nos fan step regulator 100W 2 module with connections (Data-12)

Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data-13)

Supply and fixing of 40A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data-14)

Supply and fixing of 8 way single phase and MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only (The MCB DB and MCB's should be Legrand or higherend make)(Data-15)

Supply and fixing of 8 way TP MCB DB with 1 No 63A TP MCB switch as incoming and 24 Nos 6A-32A SP MCB as outgoing in steel enclosure distribution board of double door type with metal door with IP43 protection (The MCB DB and MCB's should be Legrand make) (Data-16)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-17)

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) and 1 of 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-18)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) and 1 of 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-19)

Supply and run of 2 of 6 sq.mm. (84 / 0.3) and 1 of 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections(Data-20)

Supply and run of 4 of 16 sq.mm. (101 / 0.45) and 1 of 2.5 sq.mm (56/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connections (Data-21)

Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps(SD-194)

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection(SD-160)

Supply and fixing of 8" x 6" PVC synthetic box for cable connection (Data-22)

Supply , Fabrication, erection and commisioning of 100Amps dust vermin proof wall mounting panel board of suitable size made up of 16SWG CRCA sheet steel for outer body on suitale angle iron frame work with copper flat of size 25mm x 3mm for 3phases and neutral with connections to accomadate the following switches Incoming TDN 100A 4 pole switch with disconnector fuse unit in sheet steel enclosure-1no (H+2T/eq) Outgoing 63A TPN switch with disconnector fuse unit in sheet steel enclosure -3 nos (Data - 23)

Supply and fixing of 100A 4 pole change over switch on suitable angle iron frame work with earth connection (Data-649)

Supply and fixing of LT meter panel board with 3nos 100A fuse units and to accomadate the 3 phase TNEB meter with earth connection (Data-25)

Supply and run of 4 of 25 sqmm (168/0.45) PVC insulated Copper Conductor of 1100V grade in suitable PVC rigid pipe concealed on wall and ceiling with continuous earth wire connection 6sqmm cu.wire with painting of suitable colour (Data-26)

Supply and run of copper flat of size 25mm x 3mm on wall or in ground for earth connection (Panel board to ISI earthing) (Data - 76)

Supply and run of No.8 SWG copper wire in suitable PVC rigid pipe with earth connection (For switches DB's) (Data -371)

Supply and clamping of 3-1/2 x 95 sq.mm LTUG aluminium cable through HDPE pipe on post or on wall with MS clamps (Data -29)

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection (SD-190)

Supply and fixing of 3 Nos 100A aerial fuse units (500V) on suitable MS box with hylem sheet cover on post or on wall with connection (Data-30)

Supply and fixing of 3 mts 1-1/2" G.I pipe class B with necessary clamping and fan hook to mount the 48" sweep Ceiling fan with Connections and painting of suitable colour (Data-31)

Supply and clamping of MS clamps of suitable size with necessary welding and bolts nuts to mount the wall mounting fan on the pillers with painting of suitable colour (Data-32)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 233)

Sub total

Karuppasamy (BID ID -1325811)