LOT -02 Renovation work of Service road from Km 21.500 to Km 24.400 (2.900 km) of the Pahuj Main Canal in Jhansi district.

Amount

Granular Sub-base with Well Graded Material Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 Kn static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402.

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.

WBM Grading 3 providing, laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with three wheel 80-100 KN static roller in stages to proper grade and camber , applying and brooming, crushable screening to fillup the interstices of course aggregates , watering and compacting to the required density grading 3 as per MORD technical specification clause 405

Prime Coat Providing and applying prime coat with bitumen emulsion (S.S.-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Tack Coat Providing and applying tack coat with Bitumen using Bitumen V.G.-10 distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per TS Clause 503.

Premix Carpet Providing laying & rolling of open graded premix carpet of 20 mm thickneess composed of 13.2 mm to 5.6 mm aggregates using VG-10 grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, i/c spreading mixing in a suitable plant, laying and rolling with three wheel 80-100 KN static roller in capacity, finished to required level and grades to be followed by seal coatTS Clause 408

Seal Coat Providing and laying seal coat by mannual means with VG-10 Gr. grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type "C"

EarthWork in MKR mixed soil inculding lead up to 30 m lead and 1.50m lift. with ,watering and Mechanical compaction and dressing etc complete the work.

Jungle Cutting heavy under growth & bushes up to 7.5 Cm. dia meter in canal including removal of roots with collection and removal.

Brick Edging on both sides of the road of first class bricks 8 cm (3") wide and 12 cm (4.5") deep laid with mud mortar i/c labour and supply of bricks finished to required templete and proper alignment and also i/c dressing and ramming the excavated earth .

M/s Hari Construction (BID ID -5587130)