WELCOME MAINTENANCE SMART PERIODICAL SERVICES,

Amount

M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying one coat of white wash complete all as specified and directed.

All as per item No 1 above but on ceiling

M&L for Preparation of old decorated surface of wall incl cornice etc and applying one coat of oil bound distemper by using roller brush complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty complete.

All as per item No 4 above but on ceiling complete all as specified and directed.

M&L for preparation of old treated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

All as per item No 6 above but on steel surface complete all as specified and directed.

M&L for brooming down plastered/unplastered old decorated surface of walls and applying one coat of cement base paint complete all as specified

M&L for Preparation of old decorated concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applyhing one coat of synthetic enamel paint complete all as specified.

M&L for Preparation of old treated wooden surface of any description over 10cm width or girth and applying one coat of synthetic varnish complete all as specified

M&L for preparation of old surfaces of wall/sheet any type applying one coat of ACE exterior emulsion paint (Asian paint) complete all as specified and directed.

S&F in repair single hole brass CP WHB mixer cock 15mm dia complete all as specified

S&F in repairs CP brass hot & cold mixer with legs non telephonic fixed in wall for bathroom complete.

S&F in repairs plastic water closed sheet cover of any colour closed pattern with flat bottom and cover and MS chromimum plated or aluminised hinges devices etc complete.

Taking down cement plaster/cement lime plasters on brick work any descritpion incl racking out of joints and cleanaing dust etc

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/conc surfaces of walls complete.

M&L for 15mm thick rendering on fair faces of brick or concrete surface in CM 1:4 finished even & smooth all as specified

M&L for two coat of cement base paint over cement wash with white cement incl preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L for two coat oil bound distemper on newly plastered surfaces on wall over a coat of primer all as specified incl preparation of surfaces complete all as specified and directed.

M&L for two coat oil bound distemper on newly plastered surfaces on wall over a coat of primer including over and incl 1.5mm thick wall care of putty as specified incl preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing unserviceable tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (below or above ground level complete for all as specified and as directed.

M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x450x7 mm thick in set and jointed in neat cement slurry and pointed to white cement to match on the wall over 10 mm thick 1:4 screed bed etc complete all as specied and directed.

M&L for 300x300 mmx7-8 mm thick coloured non skid ceramic tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 7-8 mm thick coloured non skid ceramic tiles(square/rectangular) area exc 0.11 Sqm but not exc 0.18 Sqm in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 15 mm thick screed bed in cement morta 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete.

Taking down 15mm GI tubing and connection etc complete all as specified and directed.

Taking down 20mm GI tubing and connection etc complete all as specified and directed.

S&F 15 mm dia GI tubing medium grade fixed in floors, walls, ceilling etc complete all as specified and directed.

Fixing only 15 mm dia GI tubing medium grade fixed in floors, walls, ceilling etc complete all as specified and directed.

S&F 20mm dia GI tubing medium grade fixed in floors, walls, ceilling etc complete all as specified and directed.

Fixing only 20mm dia GI tubing medium grade fixed in floors, walls, ceilling etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, complete.

S&F in repairs brass chromium plated bottle traps 32 mm bore for WHB with inlet and out let, screwed for pipe or connections including necessary packing, union & cap etc complete all as specified & directed. etc complete.

S&F in repairs PVC connection 600mm long with check nut etc complete.

S&F in repair WC pedestal pan (EWC) and trap incl connection to drain or out going pipe & to flush pipe , anti syphonage piipe etc complete all as specified.

S&F in repair fancy type CP bib cock long body 15mm bore with wall flange alloy with crutch handle screwed down for iron pipe chromium plated fixed in 15mm bore pipe complete.

S&F in repair PTMT bib cock 15mm bore with wall flange alloy with crutch handle screwed down for iron pipe chromium plated fixed in 15mm bore pipe complete.

S&F in repairs, stainless steel sink with drainage board made out of 1 mm thick of size 915x460xmm, bowl size of 410x330x160 mm including CP brass waste cupling , PVC waste pipe , brackets etc complete.

S&F in repair stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions complete.

S&F in repair PTMT waste coupling 32mm dia for kitchen sink complete all as specified and directed.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB, kitchen sink complete all as specified and directed.

S&F in repairs PVC cabinet mirror 600x450 mm complete.

S&F in repairs PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

S&F in repairs 15mm dia CP pillar taps, fency type, with capstan heads, screwed down high pressure with long screwed shank and fly nuts, screwed for iron pipe.

S&F in repairs CP fancy type shower rose complete all as specified and directed.

S&F in repair CP fancy type toilet paper holder complete.

S&F in repairs CP fancy type towel ring complete.

S&Fin repairs 600mm long CP fency type towel rail with bracket etc complete.

S&F in repairs CP brass jet spary for Europen type water closet with 1.50m long flexible PVC pipe and connectiong nipples complete.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&Fin repair mild steel curtain rods with PVC lining 20mm dia complete all as specified and directed.

S&F in repair curtain brackets mild steel with PVC lining matching with the curtain complete all as specified and directed.

S&F in repairs fancy type glass corner of 300 mm dia self with CP brackets etc complete all as specified & directed.

S&F in repairs fancy type glass self with CP brackets etc complete.

S&F in repair stainless steel plate rack of size 900 x 600 x 200mm of best quality made out of 1mm thick sheet etc complete all as directed. (Make:- Anjali /Nupper /Solent.)

S&F in repairs 125mm dia CP grating etc complete.

S&F in repair CP fancy type towel rail 610 mm long complete all as specified and directed. Make:Jaquar or Equivalent

S&F soft rubber beading size 35 x 4mm fixed with nails or suitable adhesive complete all as specified and directed.

Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

Dismantling of existing unserviceable water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr) complete all as specified

S&F rotational moulded polythene water stoarage tank, cylinderical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity complete all as specified and directed

S&F rotational moulded polythene water stoarage tank, cylinderical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity complete all as specified and directed

Cleaning and removing of all scales and dift etc. from PVC tanks and from mouth of circulating pipes of any dia etc. repairs to minor cracks repairs, stopping leaking of inlet/outlet with cement paste cleaning date shall be painted on each tank neatly all as specified and directed by Engineer - in - charge for following items :-

a) Above 250 Ltrs but upto 500 Ltrs.

b) Above 501 Ltrs but upto 1000Ltrs.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete..

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union and fixed in repairs of following sizes:-

a) 20mm bore.

b) 25mm bore.

Taking down chowkats or frames with shutters not exc 1.50 Sqm each( without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkats or frames without taking off shutter from the frame (wooden/aluminium)exc 1.50 Sqm not exc 4.0 Sqm each and removing to store complete.

Dismantling wooden ceiling board in any thickness including aluminium frame in grid pattern complete all as specified and directed.

Dismantling framed work timber scantling in fillets rails rafters etc under 40 sq cm in section etc complete all as specified

Dismantling framed work timber scantling in fillets rails rafters etc over 40 sq cm in section etc complete all as specified

Dismantling of RCC jali of any description complete all as specified and directed.

Hacking out old broken glass(any thickness,size,quality or description) from wooden frame or stone, concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M & L for brick masonry with sub class "B" bricks built in CM(1:6) straight or curved on plan main radiuous exe 6 mtr etc complete all as specified & directed.

M&L for rendering 10 mm thick CM 1:4 on ceiling,chajja complete as specified.

M&L for hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface etc complete.

M&L for PCC (1:4:8) type D2 using 40mm stone agg as in sub base of flooring / fdn of wall etc complete.

M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 50 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in floor finished even and smooth without using extra cement (glass diving strips shall be paid separately) complete all as specified and directed

Supply only Glass dividing strips 38 mm wide fixed in floor complete.

S&F 2nd class Hard wood in scantling clear sawn for timber framed work for ceiling.

S&F clean sawn 2nd class H.W plain fillets square or rectangular in section exc 13 sqcm & n exc 25 Sqcm for beading of ceiling board and secured with screwes

S&F clean sawn 2nd class H.W plain fillets square or rectangular in section exc 3 sqcm & n exc 6 Sqcm for beading of ceiling board and secured with screwes

M&L for plywood ,Grade BWR ,typeBB, 6mm thick fixed with screw to timber frame work.

M&L for POP false ceiling over GI snap grid permiter wall channel 25x25m fixed on wall all round, GI main ceiling channel with flange 50x25mm @ 250mm C/C, cross GI channel section 25x12 mm @ 750 C/C alongwith the suspenders of GI angle 25x25 mm @ 1200 mm C/C. The 20 to 25 mm thick POP lath pastering over n. less than 0.56 mm thick wire gauge in complete ceiling incl form work. Ration of POP and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete.

M&L for 15 mm thick fine fissured teglar RH 99 make armstrong Tringular and acoustic purpose of size 600x600x15 mm thick fixed in GI Grid powder coated snap grid ceiling of L section 19x19x0.3mm thick and tee section 24x33x0.3mm with suspender of 10 gauge GI wire of required length, fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good complete all as specified and directed.

S&F in reapir for false ceiling boards 15 mm thick fine fissured RH 99 make armstrong acoustic purpose of size 600x600x15 mm thick fixed only in exisitng GI Grid powder coated snap grid ceiling of L section 19x19x0.3mm thick and tee section 24x33x0.3mm with suspender of 10 gauge GI wire of required length, fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good complete all as specified and directed.

M&L 2nd class hardwood plain ,solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chafered, put together with glue pinned at joints, etc complete all as specified and directed.

S&F 30mm thick Flush door shutters, solid core with block board core with ply wood face panels commercial type on both sides etc .

S&F solid PVC frame (single Rebated)of size 60mmX30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100X8 sheet metal CSK screw complete all as specified and as shown on drawing(Note door frame shall be water proof ,termite proof,elegant and should have exellent screws holding strength to fix hinges and hold door properly for long life)

S&F Factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3mm thick high pressure compact laminates on both sides of approved colour as infill ,with 'C type GI or 40X20X19 0f MS pipe as stiffner & supplying & fixing in frame at site as per specification & drawing.

S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete. Make: Vista or equvalent

S&F in repair for aluminium anodised window openable/fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.

S&F in repair aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed.

S&F in repair for aluminium anodized door (Partly paneled and partly glazed ) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with self closing hydr4aulic door closer complete with all fitting complete all as specified and directed.

S&F sheet glass ordinary quality 3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.

S&F steel window with side hung shutter incl projecting type hinges with steel handle & peg stay with glazing bars dovetailed and welded etc complete all as specified and directed.

S&F in steel window with side hang shutters incl box type hinges with steel handles and steel peg stay, complete without glazing bars dovertailed of welded complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with galvanised wire staples.

S&F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with galvanised wire staples.

M&L for steel work in tubular trusses including special shaped washers etc. Complete using ERW or induction butt welded tubes conforming toIS 1161 -1979 grade St 240

S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified

S&F 300mm length Alu. Ally, anodised, sliding door bolt with sand or dia-cast brass hasp, staaple (bolt type ) and fixing with rolled or drawn brass bolts fency type etc complete.

S&F 100 mm MS size butt hinges, cold rolled medium weight etc complete.

S&F 200mm length Alu anodised barrel tower bolts, of extruded section etc complete.

S&F 150 mm size extruded alu alloy handle fabricated type etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

M&L for Precast cement cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate), 25 mm thick (measured solid), including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately all as specified and directed

S&F double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other made of mild steel heavy futy and fixed

S&F in repiar 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair aluminium anodised (5 micron) powder coating partition (all necessary fittings included) with aluminium door section weighing not less than 0.55 Kg/RM including top portion fixed with 5.50 mm thick tinted glass and bottom portion with one side decorative and other side balancing white and aluminium beading screwes complete.

S&F in repair aluminium anodised (5 micron) powder coating partition (all necessary fittings included) with aluminium door section weighing not less than 0.55 Kg/RM including top portion fixed with 5.50 mm thick tinted glass and bottom portion with one side decorative and other side balancing white and aluminium beading screwes complete.

M&L for Granite (of any type) tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shede of granite stone including and polishing screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:6 complete. including demolition of stone slabs and tiles of any thickness in floors, aprons laid, bedded and pointed in any mortor all as specified

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note: - Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

Supply and fix in repair 6mm thick bevelled edge looking mirror mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete.

M&L for taking down existing window shutter of glazed/ gauzed of size of each pane not exceeding 1 sqm including cutting of exisitng window projecting/ box hinges and providing/ welding of two nos box type hinges to each pane in any postiotion height of bldg up to 10 Mtrs including all necesary fixing arrangements to the window to make eserviciabe all as specified and as directed by Engr-In-charge

Resecuring or easing and adjusting without taking down area of each shutters exc 1 Sqm and not exceeding 2 Sqm in each pane all as specified and as directed

Resecuring or easing and adjusting without taking down area of each shutters N exc 1 Sqm in each pane all as specified and as directed

M&L for repairs to leaking bib tap, pillar tap, stop cock, angle cock and gate valve of 15 & 20 mm dia by changing rubber washers, or using M seal, etc as required to rectify the defect all as directed by Engr-in-Charge.

S&F in repairs chromium plated waste copling for kitchen sink/WHB of any size complete.

S&F in repairs brass spindle for taps/ stop cockof any size etc complete all as specified and directed.

S&F in repairs brass spindle for concealed stop cock of any size etc complete all as specified and directed.

M&L for cleaning and refixing of 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc all as specified and as directed by Engr-in-charge.

M&L for cleanig and refixing of 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc all as specified and as directed by Engr-in-charge.

M&L for removal of air lock/blockage in 15mm/ 20mm bore GI water tubing cleaning the pipe and fittings etc complete all as directed by Engr-in-Charge.

Taking down wash hand basin/ sink vitreous china of any size and re-fixing the same after replacing rusted damaged brackets including cutting for and pinning in ends of brackets complete all as directed by Engr-in-Charge.

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm including pillar tap , CP waste coupling & brackets and fixed complete all as specified and directed

Taking down alluminium door completely and refixing in the same opening after adjusting the floor spirng / adjusteing the screws for easy moving and making functional by changing rubber beading to glass/board all as specified and as directed

M&L for running welding in repair of thickness not exceeding 6mm in any position all as specified and as directed

M&L for welding in repairs n. exc 2.5cm in length thickness of welding should not exc 6mm

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of walls, wall projection, face of chajja, projected face of roof slab and face and sides of sunshade etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) in camouflage pattern (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints)

Note: - All petty nature complaints should be attended on the same day of complaint otherwise Rs 300.00/ per complaint will be deducted in RAR/Final bill from the total workdone

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

ANJALI CONSTRUCTIONS