SPECIAL REPAIRS TO ROOFS BLDG NOS T33 T29 AT 429 ASC SUP COY MADGAON UNDER GE PANAJI GOA

Amount

Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and directed.

Supply and fix for framed work such as in doors or gates or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for anging or sliding with and including either hooks and hinges or steel hanging door fittins and fixing complete.

Material & Labour for PCC 75mm thick, 1:4:8 (type D-2) using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Material & Labour for PCC 100mm PCC 1:3:6 (type C-2) using 40mm graded stone aggregate as in flooring, laid in pannel & finish smooth without using extra cement all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint, 10cm width or girth over a coat of red oxide primer including complete removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers of any number of coats of any width or girth to steel surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint, 10cm width or girth over a coat of red oxide primer including preparation of old painted wooden surfaces complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.

Material and labour for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge.

Material & Labour for laterite stone walling of squared rubble, regular coursed well bonded, bedded and solidly hearted built in cement mortor 1:6 but except stone all as specified and as directed.

Extra over laterite stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonry regular coursed complete all as specified and directed.

Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etc complete.

Material & Labour 15mm thick plastering in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement on walls other similar work etc. all as specified and as directed by Engr-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Material & Labour 15 mm thick plastering in cement mortar 1:6 with water proofing compound and finished even and smooth without using extra cement on walls or other similar work etc. complete all as specified and as directed by Engr-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including complete removal of existing treatment old wall surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash including complete removal of existing treatment from old decorated ceiling surfaces complete all as specified and directed.

Material & Labour for cement concrete 1:2:4 (type B) using 20mm graded stone aggregate in copings or similar work, bed plates and kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating with necessary formwork complete all as specified and as directed

Taking down chowkat with shutter including hold fast (Without taking off shutters from the frames) not exc 1.5 Sqm each all as specified and as directed.

Taking down chowkat with shutter including hold fast (Without taking off shutters from the frame) exc 1.5 Sqm not exc 4 sqm each all as specified and as directed.

Supply and fix mild steel flat iron for hold fast complete conforming to Fe-290 Gde-E-165 all as specified and as directed.

Supply and fix second class hard wood kiln seasoned chemically treated plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints completeall as specified and as directed.

Supply and fix IInd class hard wood 35 mm thick chemically treated factory made second class hard wood glazed & skeleton shutter rebated & prepared to recieve glass, gauze etc. with sash bars divided into squares , with plain chamfered or rounded mitred & rebated sash bars any numbers all as specified and as directed.

Supply and fix IInd class hard wood 35mm thick factory made plain framed, panelled shutter (one panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and as directed .

Supply and fix for stainless steel butt hinge, 75mm size all as specified and as directed.

Supply and fix for stainless steel butt hinge, 100mm size all as specified and as directed.

Supply and fix aluminium anodized barrel tower bolt 100 mm extruded section all as specified and as directed.

Supply and fix aluminium anodized barrel tower bolt 150 mm extruded section all as specified and as directed.

Supply and fix extruded aluminium alloy handle fabricated type 150 mm.

Supply and fix aluminium alloy , anodized , sliding door bolt with hasp , staple (bolt type ) & fixing clips of sheet , cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing .250 mm size.

Material & Labour for preparing new wooden surface & applying two coat of synthetic enamel paint over one coat of pink primer.

Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane

Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and as directed.

Supply only integral water proofing compound.

Material & Labour for 75 mm thick cement concrete1:3:6 (type C2) using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified and as directed.

SAI ENGINEERS & CONTRACTORS

N VENKATESWARLU