51_Infrastructure

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor.

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in 1st floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (iii) With 1:3 cement mortar (a) 20 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (1st floor).[Excluding cost of chipping over concrete surface] (iii) With 1:3 cement mortar (a) 20 mm thick plaster

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (iii) 35 mm. thick (GF)

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (iii) 35 mm. thick (FF)

Painting block letters or digits in Black Japan or any approved paint as per direction. h) Size above 15 cm. and upto 20 cm.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, 1st floor

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roof. (a) upto 150 mm. thick

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With super gloss (hi-gloss) - (a) On timber or plastered surface : (iv) Two coats (with any shade except white)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With super gloss (hi-gloss) - (b) On steel or other metal surface : (iv) Two coats (with any shade except white)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: b) Two Coats

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) (Ground Floor)

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) (First Floor)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (iv) 75 x 63 x 3.2mm.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm.

Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (v) 75mm. X 60mm. X 3.15mm.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (a) 35mm thick shutters (single leaf)

Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws.

Supplying, Fitting & Fixing 30 mm thick thick both side prelaminated Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt.

Iron socket bolt of approved quality fitted and fixed complete. (d) 225mm long x 10mm dia bolt.

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long.

Supply & laying of Cement Bag including filling fine sand with all incidental charge ETC Complete in all respect as per direction.

Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) (iii) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.

Supplying and laying brick Khoa of ordinary bats of size (38 mmx 63 mm)of approved quality in 100 mm layer (loose) filling in gaps with small ones rammed and compact as directed true to level and grade.

Hire and labour charges for making Strong Bamboo barricade with 50-75 mm dia Bamboo, Bamboo Post hight up to 1.5 Mtr. above from the Ground level, including rafter binder etc and digging hole up to 0.300 mtr below GL. The spacing of the each Post should be 0.450 Mtr C/C, and rafter spacing not less than 0.400 Mtr. c/c from the 1st rafter which should be bind at the height of 0.45 Mtr. from the Ground level. and removing same after the purpose ended as per direction of the authority.

Hire and labour charges for making Strong Bamboo barricade with 75 mm dia Bamboo, Bamboo Post height up to 1.8 Mtr. above from the Ground level, including rafter binder etc and digging hole up to 0.600 mtr below GL. The spacing of the each Post should be 0.300 Mtr C/C, and rafter spacing not less than 0.300 Mtr. c/c from the 1st rafter which should be bind at the height of 0.300 Mtr. from the Ground level. and removing same after the purpose ended as per direction of the authority.

Hire and labour charges for making Strong Bamboo barricade with 75 mm dia Bamboo and Eucalyptus bullah, Bamboo Post height up to 1.8 Mtr. above from the Ground level, including rafter binder etc and digging hole up to 0.600 mtr below GL for bamboo and 0.600 mtr for the Bullah. The spacing of the each Post bamboo should be 0.450 Mtr C/C and Eucalyptus bullah should be provide 3 nos. alternative of bamboo post, and rafter spacing not less than 0.300 Mtr. c/c from the 1st rafter which should be bind at the height of 0.300 Mtr. from the Ground level. and removing same after the purpose ended as per direction of the authority.

Hire and labour charges of making wooden barricade with local sal wood, Post of 0.050 X 0.075 post of height up to 1.8 Mtr. above from the resting platform, including rafter binder etc with wooden batten of 0.050 X 0.025 mm size. The spacing of the each wooden post should be 0.450 Mtr C/C and wooden batten spacing not less than 0.450 Mtr. c/c . and removing same after the purpose ended as per direction of the authority.

Hire and labour charges for Construction of the Drop Gates making with strong bamboo with providing coir rope, Sand filled cement bags for up and down of the bamboo as a lever arm effect and the lever arm should be keep with strong bamboo structure etc. all complete as per direction of the Engineer-in-charge Complete in all respect as per direction.

Hire and labour charges for Construction of wooden platform/Box of height 0.450 mm height the made with 19 mm ply wood top and other frame made with local undress sal wood of 0.075X0.05 mm batten as per direction. Max (2.400 mtr. X2.40 Mtr)

Hire and labour charges for making Display board with 19 mm ply wood and hanging the same in wall including pasting lamination board of 1.00 mmm thick of the wide 0.300 mm as per direction.

Providing labour for scavenging works and other related works as per instruction.

Providing labour for cleaning wash room toilet etc related works as per instruction.

Hire Charges for supplying PVC chair Complete in all respect as per direction. (The rate will be resticted upto Rs. 250.00 of each chair if it is found used more than 29 Days of a particular cell continuously)

Hire Charges for supplying of 3 seater Sofa set Complete in all respect as per direction..

Hire Charges for supplying of 1 seater Sofa set Complete in all respect as per direction..

Hire and labour charges for making Construction of Temporary urinal for male or female making with bamboo post rafter and cover with Single durma mat s per instruction and removal same after Purpose Ended Complete in all respect as per direction.

Hire and labour charges for making Construction of Temporary latrine for male or female making with bamboo post rafter and cover with GIC per instruction and removal same after Purpose Ended Complete in all respect as per direction.

Hire and labour charges for construction of temporary pandel with rain proof polythine/ tarpaulin including all complete with sufficient strong Bamboo without ceiling. And removal same after Purpose Ended Complete in all respect as per direction. Span of the Pandel upto 6.70 Mtr. (rat valid upto 7 days) there after rate will be counting 40 % for next 30 days and rate may be given there after 20 % for next 30 days

Hire and labour charges for construction of temporary pandel with rain proof polythine/ tarpaulin including all complete with sufficient strong Bamboo without ceiling. And removal same after Purpose Ended Complete in all respect as per direction. Span of the Pandel above 6.70 Mtr. up to 10.500 Mtr. (rat valid upto 7 days) there after rate will be counting 40 % for next 30 days and rate may be given there after 20 % for next 30 days

Hire and labour charges for construction of temporary pandel with rain proof polythine/ tarpaulin including all complete with sufficient strong Bamboo and Eucalyptus bullah , without ceiling. And removal same after Purpose Ended Complete in all respect as per direction. Span of the Pandel above 10.500 Mtr. up to 22.000 Mtr. (rat valid upto 7 days) there after rate will be counting 40 % for next 30 days and rate may be given there after 20 % for next 30 days

Hire and labour charges for Sinking of Tube well including supplying of all materials & taking out the same after counting ceremony Complete in all respect as per direction.

Hire charges for supplying square & rectangular table at work site including cost of carriage Complete in all respect as per direction. (The rate will be resticted upto Rs. 700.00 of each chair if it is found used more than 19 Days of a particular cell continuously)

Hire and labour charges for Construction of wooden rack making with wooden battane 3"X2" with post ,rafter, battane as per drawing Maximum height will be 7'4"and for wide of 4'4" and top cover with 19 mm ply wood, including fitting fixing with nails, nut bolt, screws etc in all respect as per direction. this would be dismantling and removing the same after the purpose ending. The Rack should be supported with 75 mm dia bamboo in the roof beam of that room measurement will be done in running meter of each layers of racks.

Hire and labour charges for Construction of wooden rack making with wooden battane 3"X2" with post ,rafter, battane as per drawing Maximum height will be 7'4"and for wide of 2'4" and top cover with 19 mm ply wood, including fitting fixing with nails, nut bolt, screws etc in all respect as per direction. this would be dismantling and removing the same after the purpose ending. The Rack should be supported with 75 mm dia bamboo in the roof beam of that room measurement will be done in running meter of each layers of racks.

Hire and labour charges for construction of counting hall net structure making with wooden frame post of which 3"X2" and place @ 1.800 mtr. C/C and upto 2.700 Mtr. height and runner of 2"x1" wooden battan of 4 nos in horizontally place and will be fixed with hexagonal mesh netting made with 18 B.W.G. galvanized wire of 19 mm mesh complete in all respect as per direction . same will be dismantling and removing the same after the purpose ending. The structure should be supported with 75 mm bamboo horizontally in both direction. Measurement will be taken as wooden structure only and if the roof is cover with net then the roof area will be consider along with portion netting area in the measurement.

Supplying Plastic Bucket and Disposal of the Same after purpose ended Complete in all respect as per direction .

Supplying Plastic Mug and Disposal of the Same after purpose ended Complete in all respect as per direction .

Supplying Plastic Jug and Disposal of the Same after purpose ended Complete in all respect as per direction .

Hire and labour charges for construction of temporary partition wall making with wooden frame post of which 3"X2" and place @ 1.400 mtr. C/C and upto 3.05 Mtr. height and runner of 2"x2" wooden batten of 4 nos in horizontally place and will be fixed with hexagonal mesh netting made with 18 B.W.G. galvanized wire of 19 mm mesh upto height 1.15 mtr. from top and 19 mm Ply wood for the Height of 2.40 Mtr. from the bottom, complete in all respect as per direction . same will be dismantling and removing the same after the purpose ending. The structure should be supported with 75 mm bamboo horizontally in both direction. Measurement will be taken as wooden structure only including netting area and ply wood area.

Hire charges for Supplying Green net carpet/ Green Carpet Complete in all respect as per direction .

Hire charges for Supplying polythene sheet various purpose and repacking the same after purpose ended Complete in all respect as per direction .

Hire charges for Supplying VIP Chair With Cover (Steel) Complete in all respect as per direction.

Hire charges for Supplying Table Cloth/ towel Complete in all respect as per direction.

Hire and labour charges for Supplying and installation Colour LCD TV with Complete in all respect as per direction.

Hire and labour charges for Temporary Cable connection for Television from local cable operator and disconnect the same after purpose ended Complete in all respect as per direction. With SET TOP BOX ( After the 1st month rate will be reduce upto Rs. 1500.00 per month in if it is used continuously..)

Hire and labour charges for Constructed of GCI sheet barricade making with 75 mm dia strong bamboo post and binder etc along with GCI sheet fitting and all charges Complete in all respect as per direction of height of GCI covered 2.1 Mtr.

Hire Charges for supply and assembly public address system with 1 No. wired Microphone and 1 Nos. small size box, which will be place in a suitable position where sound should reach ever person comfortably as per direction. Public system should be assemble with amplifier 1 set which having the option to collected the sound from the laptop or computer(the wire for this will be pay separately), including repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly public address system with 1 No. wired Microphone and 2 Nos. small size box, which will be place in a suitable position where sound should reach ever person comfortably as per direction. Public system should be assemble with amplifier 1 set which having the option to collected the sound from the laptop or computer(the wire for this will be pay separately), including repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly public address system with 1 No. wired Microphone and 2 Nos. Horn and 3 nos. small box, which will be place in a suitable position where sound should reach ever person comfortably as per direction. Public system should be assemble with amplifier 1 set which having the option to collected the sound from the laptop or computer(the wire for this will be pay separately), including repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly public address system with 1 No. wired Microphone and 4 Nos. Big size box and 15 Nos. to 20 nos. Horn which will be place in a suitable position where sound should reach ever person comfortably as per direction. Public system should be assemble with amplifier 1 set which having the option to collected the sound from the laptop or computer(the wire for this will be pay separately), including repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly public address system with 3 No. wired Microphone and 1 Nos. small size box and 2 Nos. to 6 nos. Horn which will be place in a suitable position where sound should reach ever person comfortably as per direction. Public system should be assemble with amplifier 1 set which having the option to collected the sound from the laptop or computer(the wire for this will be pay separately), including repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly wireless microphone set with for public address system and repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly 2 Nos. wireless microphone set with dual used with for public address system and repacking of the same after purpose ended as per direction.

Hire Charges for supply and assembly additional 1 No. Horn including fitting fixing wire etc. complete in all respect as per direction. public address system and repacking of the same after purpose ended as per direction.

Hire and labour charges for construction of temporary decoding frame structure made with strong bamboo of 75 mm dia with a strong bamboo post @ 1.200 Mtr C/C and 75 mm batten 4 Nos. with sufficient supported etc all complete and removing the same after purpose ended Complete in all respect as per direction.

Hire charges for Supplying USE ME (Big Size dustbin) placing the same Complete in all respect as per direction..

Supply and Print the FLEX as required subject and Complete in all respect as per direction.

Hire and labour charges for Construction of Temporary Tower for fitting fixing of Light use as high makes with strong bamboo post etc batten etc all complete removing the same after purpose ended Complete in all respect as per direction.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. White

(ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) 15 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work 40 mm dia.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work 25mm dia.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work 15mm dia.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (a) 75 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 x) Bend 87.5º (a) 75 mm

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Please Enable Macros to View BoQ information