Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 CrAccepted-AOC TARAPAD BHAWAN H N 78 2ND FLOOR TRIPURA ROAD BELTOLA GUWAHATI 781022 | KAMRUP METRO | ASSAM | 781022 | ₹7.2 Cr | L1 | Accepted-AOC L-1 bidder |
| 2 | L2₹7.3 CrRejected-AOC 243 SURAVI PATH P O KAHILIPARA P S DISPUR | NAGAON | ASSAM | 782001 | ₹7.3 Cr | L2 | Rejected-AOC Quoted higher than L-1 |
| 3 | L3₹7.4 CrRejected-AOC | ₹7.4 Cr | L3 | Rejected-AOC Quoted higher than L-1 |
| Sl No | Description | Qty | Unit | Bhaba Kanta Nath L2 | RAKESH KUMAR SINGH L1 | RAKESH KUMAR PRASAD L3 |
|---|---|---|---|---|---|---|
| 1.00 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | 5,845.35 | Sq.m | 18.71 ₹1.1 L | 18.71 ₹1.1 L | 20.1 ₹1.2 L |
| 2.00 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1 . 5 m i n width as well as 1 0 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1 . 5 m, as directed by Engineer-in- Charge:
All Kinds of Soil | 5,845.35 | Sq.m | 138.07 ₹8.1 L | 138.06 ₹8.1 L | 141.3 ₹8.3 L |
| 3.00 | Construction of Information Pavilion and Exibhit Pavilion | 351 | Sq.m | 42,875 ₹1.5 Cr | 38,874.25 ₹1.4 Cr | 40,410.21 ₹1.4 Cr |
| 4.00Supplying, fabricating, and erecting structural steel work using hot rolled sections, plates, angles, channels, etc., of Fe250 grade (conforming to IS 2062), in trusses, frames, supports, brackets, ladders, or any other structures, including cutting, welding, bolting, grinding, hoisting, erection in position, applying one coat of primer and two coats of synthetic enamel paint, complete as per drawings and IS standards. | ||||||
| 4.10 | 100 x 100 x 10 mm ISMT (Column) | 1,176.12 | Kg | 159.5 ₹1.9 L | 159.5 ₹1.9 L | 159.5 ₹1.9 L |
| 4.20 | 100 x 100 x 10 mm ISMT (Beam) | 435.6 | Kg | 159.5 ₹69,478.20 | 159.5 ₹69,478.20 | 159.5 ₹69,478.20 |
| 4.30 | 100 x 100 x 10 mm ISMT (Beam) | 726 | Kg | 159.5 ₹1.2 L | 159.5 ₹1.2 L | 159.5 ₹1.2 L |
| 4.40 | 100 x 100 x 10 mm ISMT (Column) | 871.2 | Kg | 159.5 ₹1.4 L | 159.5 ₹1.4 L | 159.5 ₹1.4 L |
| 4.50 | 100 x 100 x 10 mm ISMT (Beam) | 605 | Kg | 159.5 ₹96,497.50 | 159.5 ₹96,497.50 | 159.5 ₹96,497.50 |
| 5.00 | Providing, making & fixing of Hollow Steel Guardrail for Support with polish, preparation of surface etc complete all as per drawing instructions of architects. | 1.39 | Kg | 165.87 ₹230.56 | 165.88 ₹230.57 | 165.88 ₹230.57 |
Tender Value
₹7.2 Cr
EMD Value
₹14.4 L
Closing Date
20 Nov 2025, 2:00 pmClosed
CEO, GMDA
O/o GMDA, GMCH Road, Bhangagarh, Guwahati-05
Waterbody development at 10th APBn,Kahilipara
2025_GMDA_48300_1
GMDA/DEV/50/2025/3
Open Tender
Civil Works
365 days
Kahilipara
Refer Bid Document
4 documents required · 4 mandatory
₹14,000
₹14.4 L
Yes
11 Dec 2025
30 Oct 2025
20 Nov 2025
30 Oct 2025
20 Nov 2025
4 Nov 2025
Amount
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1 . 5 m i n width as well as 1 0 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1 . 5 m, as directed by Engineer-in- Charge: All Kinds of Soil
Construction of Information Pavilion and Exibhit Pavilion
Supplying, fabricating, and erecting structural steel work using hot rolled sections, plates, angles, channels, etc., of Fe250 grade (conforming to IS 2062), in trusses, frames, supports, brackets, ladders, or any other structures, including cutting, welding, bolting, grinding, hoisting, erection in position, applying one coat of primer and two coats of synthetic enamel paint, complete as per drawings and IS standards.
100 x 100 x 10 mm ISMT (Column)
100 x 100 x 10 mm ISMT (Beam)
100 x 100 x 10 mm ISMT (Beam)
100 x 100 x 10 mm ISMT (Column)
100 x 100 x 10 mm ISMT (Beam)
Providing, making & fixing of Hollow Steel Guardrail for Support with polish, preparation of surface etc complete all as per drawing instructions of architects.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 150 x 55 x 6.9mm; ISJC 150 (Beam) 50mm inserted in the earth
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Square Hollow framework Support , preparation of surface etc complete all as per drawing instructions of architects
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
Earth work by mechinical I manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with % tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift : All kinds of soil
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. vi) Thermo-Mechanically Treated bars of grade Fe-5000 or more.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level : 1 :1.5:3 (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level : Concrete of M20 grade with minimum cement content of 270 kg /cum
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Trees Plant
Providing and Displaying Adenium Obesum grafted well developed with fresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
Geotextile 120 grams per sqm membrane
Supplying and stacking at site: Good earth
Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge.
Stone Boulders 60mm
Construction Of Sub- Surface Drain With Perforated Pipe Of 10cm Internal Diameter Of Metal / Asbestos / Cement Concrete / Pvc, Closely Jointed, Perforations Ranging From 3mm to 6mm depending upon size of crushed stone material surrounding the pipe, with 15Cm. bedding below the pipe and 03Cm. cushion above the pipe, cross- section of excavation 45 x 55 Cm. Excavated material to be utilized in roadway at site complete as per specifications.
Footpath with PCC Base,60 mm thick paver blocks and kerb stone edging
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1 :5 (1 cement : 5 coarse sand), including pointing with cement mortar 1 :2 (1 cement: 2 stone dust) with an admixture of pigment to match the shade of stone..
Providing and Laying 15 - 18mm thk Stonecrete, fixed over a bed of 25mm minimum thick cement mortar 1:4
Factory made single extruded WPC (Wood Polymer Composite) solid plain white colored board of 25 mm thick
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts,laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge.
P/L precast cement concrete hollow blocks: 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources )
Supplying,installing ,tesing and comissioning of IP based CCTV systems for building security comprising of PTZ/ fixed camera, cabling, recording,display system and hardware software support - for indoors only
Supplying,installing ,tesing and comissioning of IP based CCTV systems for building security comprising of PTZ/ fixed camera, cabling, recording,display system and hardware software support -for outdoors only
Supplying,installation, testing and comissioning of hydropneumatic water supply system consisting of pumps,pneumatic tank,micro processor based control panel,VFD,interconnecting pipes,valves,cabling,switchgear,etc as reqd.
Supplying,installation, testing and comissioning of hydropneumatic water supply system consisting of pumps,pneumatic tank,micro processor based control panel,VFD,interconnecting pipes,valves,cabling,switchgear,etc as reqd.
Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable sizebends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick
Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as per design weighing not less than 37Kgs, the pedestal shall be fitted with Class 'C' G.I.Pipe 7 Feet height 75mm outer dia and 7 feet height top piece outer dia of 65 mm fixed by measure of threading/welding/coupling complete. (excluding foundation).
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect
Supply of LED pole mounting type post top lantern with Npressure die cast aluminium housing body for optimal Nthermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor>0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 25 W
Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including coping/footing of the pole. upto 5 m street light pole.
Supply of LED Bollard light with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB, with 2 years Warranty against any manufacturing defect working under standard electrical condition. SPECIFICATION: 8W 1 m Height
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1 . 5 m in width as well as 1 0 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge.
Stone for Pitching
Stone for masonry work
UV stabilised 4 mm thick plain FRPsheet
Gypsum panel 666 X 500 X 100 mm size
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1 :4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1 :4 (1 cement:4 coarse sand) and finished neat complete
Laser Cut Corten Steel Sheet Facade (with Perforations) to be (CNC Machine made)
Powder coating (50 microns = 0.05mm) on Steel sections
Fabrication and installation of Entry Signage
Fabrication and installation of Directional Signage
Fabrication and installation of Info Signage
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia (m)
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
Hydraulic Motor, Shaft Extension - 25 mm Dia. Straight, Parallel Key A8 x 7 x 32, DIN 6885 , Mounting Flange - Oval Mount 2 Holes Without Needle Bearing, Port - BSPP (ISO 228)
4 HP Three Phase 8 Stage V6 Water Filled Borewell Submersible Pump Set, W6WT30008 (Head Range 95-53 m) Three Phase , Flow Rate: 0-240 LPM
5 HP Starters Control Panel for Submersible Pump Motor Starters Oil Immersed Type - Direct Online Submersible Control Starter Rating suitability with respect to Pump HP - 5 HP; 5 Horse Power Ammeter & Voltmeter - Analog
PRESSURE REGULATOR VALVE Connecting Pipe Size (ODxTh) mm (Inlet/Outlet) - 15 Nb NPT(M);Nominal Size 15 inch Material - Carbon Steel Cold Diff Test Pressure (Kg/cm2g) - 5
Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2 mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge.
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20 mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.
Lighting 3 feet Stainless Steel Step Blade Waterfall Nozzle | Wall-Mounted Water Descent Spout
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
MS Vertical Post 2.5m x 0.05mx0.05m
MS Horizontal Post 2.5mx0.05mx0.05m
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1 :6 (1 cement : 6 coarse sand)
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level : Concrete of M20 grade with minimum cement content of 270 kg /cum
Sports Barrel Transparent acrylic material (for competition) Basketball Backstop Without Installation
Metco Badminton Net Poles with Outdoor and Indoor Utility
Training Colour Badminton Net Any Other Dark Colour as per buyer's requirements ( as per BWF/ BFI Rules )
Supply of Garden Benches
Fun PLay Platform Merry Go Round
Garden Swing with seat without roof 2 - seater
Outdoor Slide with Straight design surface made of HDPE Material
OUTDOOR GYM EQUIPMENT 5 ft Iron Free-Standing Domes Climber for Playground for recommended age group 2 to 5 years
Supply and installation of Aerators
Bhaba Kanta Nath (BID ID -286482)
RAKESH KUMAR PRASAD (BID ID -286092)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BiddocumentKahilipara.pdf
Tender Documents • 1.37 MB
BOQ_76804.xls
BOQ • 0.44 MB
LOB.pdf
Additional Documents • 0.17 MB
Download all tender documents and submit your bid