Renovation of Fire Office at Bahragoda in the district of East Singhbhum.

Civil Work

5.10.7 Dismalting old plaster and pointing in cement or lime and racking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I

5.10.4 Dismalting patent stone floor do-do-all complete job as per direction of E/I

5.10.10 Taking down old doors and windows shutter do-do-all complete job as per direction of E/I

5.10.11 Taking down chaukhat of doors do-do-all complete job as per direction of E/I

5.10.12 Taking down chaukhat of windows do-do-all complete job as per direction of E/I

DSR 10.14.2.1 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by E/I

5.4.32 Supplying fitting and fixing 35mm thick solid core type non decorative single leaf flush shutters do-do all complete job as per deirection of E/I

5.8.32 Providing two coats of synthetic emamel paint of approved shade and make over new wooden surface do-do-all complete job as per direction of E/I

DSR 21.1.2.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :