COMPREHENSIVE MAINT FOR MARRIED AND OTM ACCN UNDER AGE B/R-I AT BB CANTT SRINAGAR

Amount

Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Dismantling timber scantling 40sqcm and over in section in any position as in unframed/framed work, complete all as specified and as directed.

M&L for 2nd class soft wood (Kail) as in scantling clean sawn, complete, all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc.) or unsulation boards/ slabs, any thickness, including cover fillets, complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling complete all as specified and directed..

S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed.

S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqcm sectional area, secured with nails or brads complete all as spd and directed

Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed.

S&F 20mm thick boarding clean sawn as in eaves board fixed with nails, complete all as specified and as directed.

S&F 18/19 mm thick preliminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards, complete all as specified and directed.

S&F Hasp and staple 100 mm safety type Aluminium anodised , with mild steel hinge pin incl bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F continous (piano) hinges, mild steel hinges 30mm width of flap, bright finished or electrogalvanised complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed.

M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. .

M&L for Vitrified coloured ceramic tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of cement mortar 1:6 for layig floor finish, complete all as specified and as directed

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) finished even and smooth without using extra cement as in plinth protection laid in panels, complete all as specified and directed.

Supply only 3mm thick glass dividing strips, width 38 mm and inserted in position conforming to design, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed

M&L for Glazed ceramic coloured/printed tiles 450X 350X 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) work, 18-20 mm thick, (table rubbed and polished) in steps jambs , pillars, window cills , cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:4, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank, three layers (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories, 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete including taking down old unserviceable tank all as specified and as directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tank, three layers (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories, 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete including taking down old unserviceable tank all as specified and as directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15mm dia complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm dia complete all as specified and directed.

S&F Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down old steel tubing and connections and removing from site complete all as specified and directed.

S&F Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down old steel tubing and connections and removing from site complete all as specified and directed.

M&L for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed.

M&L for lagging to pipes of internal dia 15mm used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed.

M&L for lagging to pipes of internal dia 20mm used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed.

S&F in repair 15 mm dia bib taps, cast copper alloy wth crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

M&L for PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample), complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) area not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each, complete all as specified and directed.

S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed.

S&F 35mm thick 2nd class hard wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick 2nd class hard wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in Hold fast blocks rungs etc including necessary form work complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement & fixing in the frame at site as per specification complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100mm complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete all as specified and directed.

S&F 150mm long aluminium barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminium barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane including hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and fair mixed with water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only.

Supply only liquid integral water proofing compound.

M&L for preparation of new plastered surface and applying two coats of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying applying two coats of distemper oil emulsion, white or tinted over a coat of primer, complete all as specified and directed.

S&F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed. Note: The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal from site complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socketed in any length with rubber ring joint fixed to wall as in rain water pipes, complete all as specified and directed. .

S&F 75mm bore PVC(SWR) pipe single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece single, equal or unequal, complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece single, equal or unequal, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel sheet 1.0mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) including CI 'P' or 'S' trap, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair wash hand basin vitreous china size 550x400mm, white, flat back including CP pillar tap heavy duty as approved, waste, chain plug, pvc connection, pvc waste pipe complete all as specified and directed.

S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for Hot/Cold water complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mmcomplete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed.

S&F in repairs PVC flushing cisterns 10 ltrs capacity, low level including flushing pipe and connections complete all as specified and directed.

Taking down aluminum windows any size and any height including frame if required and repair the same with repacement of rubber beading, aluminum clip, adjusment of glass panes, repair of floor spring or hydraulic door closer with oiling or greasing etc. ajusment of horizontal, vertical or middle style to the entire satisfaction of Engr-in-charge.

S&F in repair PVC waste pipe 32mm size for WHB with coupling, complete all as specified and directed.

S&F in repair PVC waste pipe 40mm size suitable for sink with coupling, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided, complete all as specified and directed.

S&F framed work such as grills grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc (capacity of tanks exc 500 ltr and n exc 1000 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height complete all as specified and directed.

S&F in repair PVC lid for water storage tank of capacity 500 Litres of approved make complete all as specified and directed.

S&F in repair PVC lid for water storage tank of capacity 1000 Litres of approved make complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base/levelling course, complete all as specified and directed.

M&L for pre-polished chequered cement concrete tiles of size 300x300x25mm thick, made by using vibratory mechanical system having glazed top layer and set, jointed and pointed in neat cement slurry with white cement and pigment as in treads / floor etc. fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, steps, seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, bond stones etc. including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including anodised aluminium snap grid frame work for false ceiling and hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. Note:- Taking up/ down and refixing of electric fittings & wiring during execution of work shall be responsibility of the contractor and cost for the same shall deemed to be included in the quoted rate and nothing extra shall be admissible to the contrctor on this account.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 5mm thick PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications complete all as specified and directed. Note:- Taking up/ down and refixing of electric fittings & wiring during execution of work shall be responsibility of the contractor and cost for the same shall deemed to be included in the quoted rate and nothing extra shall be admissible to the contrctor on this account.

S&F 6MM Tthick Non asbestos fibre cement designer board /pre Laminated self embossed texture designer board E-Board classic size 600x600 mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI Frame work for Seamless ceiling size 600mmx600mm with main runner 38x24x0.9mm thick cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturer's instructions and as directed. Note:- Taking up/ down and refixing of electric fittings & wiring during execution of work shall be responsibility of the contractor and cost for the same shall deemed to be included in the quoted rate and nothing extra shall be admissible to the contrctor on this account.

S&F aluminium door air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully paneled )two NOs of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail). Single/double leaf side hung type including necessary joint cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, aluminium anodized tower bolt 200mm long 3 NOs for each door, aluminium anodized handle 150 mm 2 NOs ‘D’ type for each. Shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter including hydrullic door closer. All door fitting except cleat shall be Ist marked (size of each door shall be as per site requirement), complete all as specified and directed.

S&F 4.5mm thick tinted glass fixed with necessary rubber gasket and aluminium beading weight not less than 100gm per RM with aluminium frame complete all as specified and directed.

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S&F brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in vertical surfaces such as dado, skirting etc.set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:3 , complete all as specified and directed

Notes :- An amount of Rs. 1,24,803.00.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S TAJ DIN KHARI (BID ID -3273371)

M/S VALLEY ENTERPRISES (BID ID -3273123)

M/S U.K. ENTERPRISES (BID ID -3270008)

M/S AIJAZ ENTERPRISES (BID ID -3269703)

M/S Vivek Gupta and Co (BID ID -3273988)

M/S NEW IQBAL ENTERPRISES (BID ID -3269624)

D N ENTERPRISES (BID ID -3270011)

M/S Ghulam Mohammad Shalla (BID ID -3269714)

M/S SHIMAR STAR GLACIER (BID ID -3269233)

M/s Lal Enterprises (BID ID -3269430)