Carryout Renovation works to existing Office Building in TNCSC MRM Campus at Chidambaram in Cuddalore District

Amount

CIVIL WORK

Supplying and Roofing with TCT Colour coated Galvalume sheet will be anchored with J or U bolts of size 6mm dia and nuts of suitable length according to the existing purlin with 1.60mm thick bitumen washer with necessary hilt bolts and GI Washer etc. The roofing sheet is 0.47mm TCT Colour coated Galvalume. The rate is inclusive of the scrab value of removed existing old AC Sheet of size 3.00m / 1.75M / 1.50M/ 2.25M of 1m width including cost of all materials, labour transporting conveyance etc., complete complying with standard specification and as directed.

Flooring with following ceramic tiles of size 305 x 305 x 6mm laid over 20mm thick cement mortar 1:3 (one cement and three sand) base mortar over the existing slab / floor including 17.00 m2 cutting the tiles to the required size with special cutters wherever necessary, laying in position and pointing with white cement cement mixed with colouring pigment at the rate of 0.3 kg / 17, sqm. etc., complete complying with standard specification etc., complete and as directed by the Engineer in charge. Complete.

Dadooing the walls with glazed tiles of size 300 mm x 200 mm of approved quality and colour over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works).

ALUMINIUM VENTILATOR Supplying, fabricating and fixing in position aluminum anodized natural colour matt finish louvered ventilator of size 600 mm x 600 mm with outer frame section with 62 x 38 x 2 mm at 1.174 Kg / m and the louvered with moving arrangements made with alluminium channel of size 60 x 30 x 4 mm at 1.274 Kg / m alluminium clips 19.05 x 17.27 / 11.05 x 0.075 mm at 0.169 Kg / m with necessary 4 mm thick plain glass panel for louvers including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC masonry and made good to the original condition after fixing etc complete. The alluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI Specification 1868 / 1962 for anodic film thickness of not less than 15 micron etc complete.

Painting two coats of Old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting new iron works for doors, windows and ventilators, iron bars, Weld mesh, Wiremesh, Screen, Steel bars, Flats, and other similar works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed.

G Velu (BID ID -1123360)