Construction of 60 bedded hostel block at high school satoo. (Kargyam) (under BADP)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Dry stone pitching (any thickness) including cost of stone. On horizontal. Incl carriage complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). Including carriage complete job.

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand). Including carriage complete job.

Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge. Incl carriage complete job.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size). Including carriage complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete job. Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc complete job and removal of form for : a) Foundations, footings, bases of columns, etc. for mass concret

b) Edges of Slabs and breaks in floor and walls.

c) Suspended floor, roofs, landings, balconies and access platform (slabs)

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fasteners of required dia complete job. 2nd class kail wood

Providing and fixing paneling or paneling and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. 2nd class kail wood

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class kail wood 50 x 20 mm.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked complete job.

Providing and Fixing factory made uPVC casement/sliding window/ door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2 mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in charge).

Renewing glass panes, with wooden fillets wherever necessary all complete. Float glass panes of thickness 4 mm.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete job. 250x16 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete job. 150x10 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. complete job. 125 mm

15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) Including carriage complete job.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work ( two or more coats) over and including priming Coat with cement primer complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement Including carriage complete job.

Finishing walls with water proofing cement cement paint of required shade: new work (two or more coate applied all complete @3.84 kg/10 sqm.)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Ist class Budloo wod.

Providing and fixing 25mm thick wooden planks ceiling (frames work to be paid for saprately)with m.s screw 1st class silver kail.

10 cm thick (average) mud phaska of damped earth on roofs mixed with yakzas laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung).

Providing and fixing plywood 6 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete job. 50x50mm (base & height) Second class kail wood

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)complete job.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. complete job.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete job. (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m²

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing cup board shutters with 25mm thick veneered particle board IS: 3097 marked exterior grade (Grade I) of approved make including second class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of engineer-in-charge With decorative veneering on one side and commercial veneering on other side complete job.

Providing and fixing bright finished brass handles with screws etc. complete job. 100 mm

Providing and fixing magnetic catcher in cup board/ward robe shutters including fixing with necessary screws etc. Complete (Best make of approved quality) Double strip (Verticle type)

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and Including carriage complete job. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Including carriage complete job. 50 mm thick with 20 mm nominal size stone aggregate. Incl. carriage complete job.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete job.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in color such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete.

Providing and fixing white vitreous china pedestal type water closet ( Indianan type) with squating pan vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, orissa pattern white viterous china wc pan of size 580mm. complete job.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing brass bib cock of approved quality. Complete job 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality. Complete job 20 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points etc. of approved make conforming IS : 8931, 15mm nominal bore.

Providing and fixing C.P brass close hole basin mixer tap of approved quality and make, weighing not less than 1.97kg. 15mm nominal bore of standard back type.

Providing and fixing C.P brass shower rose with 15 or 20mm inlet 100mm dia.

Providing and fixing C.P brass shower controller

Providing and fixing un plasticized PVC connection pipe with brass unions 45 cm length20 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend. complete job.

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work) inl. Tee and Elbow joints complete job. 75mm nominal inner dia pipes.

100 mm nominal inner dia pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license complete job.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc complete job. Pn-16 pipe, 25mm 0D

Pn-16 pipe , 20mm 0D

French spirit polishing with Two or more coats on new works including a coat of wood filler.

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete 25 mm thick, Second class kail wood complete job.

Thermal Insulation in wall with Expanded polystyrene fixed with suitable adhesive to the outer wall as per the directions of the Engineer-in-charge. Complete job.

Providing and fixing panel T&G type over fixed support including fitting and making good completed. (First class wood)

Providing and fixing 40mm dia with length not less than 700mm waste pipe for sink and wash basin. complete job.

Providing and fixing PVC pipe of required dia. With bends tee bends L head P tarap with adding material ISI marked like prince, superior or equivalent and complete job. 75mm dia = 70 mtr.

100mm dia = 50 mtr

Providing and fixing CP brass Toilet paper Holder having ISI marked.

Providing and fixing soap case holder of CP brass having ISI marked.

600mm long Towel rail with total length of 645mm width, 78mm wide and effective height of 88mm weighing not less than 190gms and of ISI marked.

Providing and fixing 600mm x 450mm berelled edge mirror of superior glass of approved quality complete job with 6mm thick hard board ground fixed with CP brass screws.

TL CONSTUCTION COMPANY