External Electrification work Police Line Tikamgarh

Amount

Supplying and erection of HT/LT overhead line single length supporting complete with aligning and keeping it in truly vertical position including digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter. dia of required length around the pole including muffing of 0.50 meter. from ground level as perspecifications with 20 cm. thick base foundation providing and busying 15 mm dia G.I. pipe from bottom to 1.5 meters above ground level on pole refilling the pit including painting of pole with bitumen paint in bottom and one coat of red oxide and two coats of aluminum paint etc. complete as per specification. The depth offoundation shall be 1/6th of the length of pole"H"Beam 152x152 mm 37.1 kg/meter weight (A) 13.00meter long

Supplying and erection of steel tubular pole swaged type as per IS:2713 1980 Complete with baseplate and top Canopy (with G.I. pipe bracket as required), supports complete with digging and keeping it in truly vertical position i/c digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter dia. of required length around the pole i/c muffing of 0.45meter from ground level as per specification with 20cm.thick base foundation providing and busying 15mm.dia.G.I.pipe from bottom to 1.5meter above ground level on pole, refilling the pit i/c. painting of pole with bitumen paint in bottom and one coat of red oxide and two coat of aluminum paints etc. complete as per specification. The depth of foundation shall be1/6th of the length of pole.(A) 410 SP-29 - 9.00 meter long.

Supplying and errection of stay set completed with stay rod, anchor plate, thimble, stay clamp, turn buckle etc. with stay wire strain insulator nut bolts as per specifications including concreting in required size and excavation in all type of soil! Rocks and also foundations in cement concrete 1:3:6 complete of required size and other necessary materials complete as per specification.(A)Stay rod 16mm with 7/4.00MM. 7/8 swg mm stay wire 1.8 m long.

Supplying and errection of stay set completed with stay rod, anchor plate, thimble, stay clamp, turn buckle etc. with stay wire strain insulator nut bolts as per specifications including concreting in required size and excavation in all type of soil! Rocks and also foundations in cement concrete 1:3:6 complete of required size and other necessary materials complete as per specification. (A) Stay rod 20mm with 7/3.15MM. stay wire

Supplying and fixing of Angle/ channel/flat iron, V cross Arms reinforcement of RSJ jolt/ flat iron fittings for overhead lines and poles such as cross arms/ bracket/ clamps/ stiffness for poles etc. all required steel work including' cutting to size making proper shapes drilling scan welding etc. including nuts & bolts plan & spring wisher and other necessary material including one coat of red oxide and two coat of aluminum paint etc. as required.

Supplying and fixing Polymer type 11 K.V. pin insulator with G.I. pin of approved make on existing pole or bracket with necessary materials and hardware complete as required.

Supplying and fixing polymer type 11 K.V. disc (strain) insulator of approved make on existing pole or bracket with necessary materials and hardware complete as required.

Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing , jump ring, billing off connecting, making 'D' loops connections etc. complete and clearing of obstacles (if any) as specified &directed. (A)AAAC Conductor 0.75sq inch (100 sqmm) aluminumorEquivalent Dog

Providing and fixing ear thing arrangement for H.T./L.T. poles with G.I. wire of 115 turn of 50mm dia. and 2.5Mtr. of Lead of 4.0 MM G.I Wire connection with bracket/ cross arm/ pole with 4mm dia. G.I. lead through 20 mm dia. G.!. Protection pipe of length from bottom of pole to 2mtr. above ground level, packing of charcoal powder&salt as per specification including excavation of pit in all typeofsoil /rock etc.complete.(including Bentonite Power)

Supplying and fixing of danger/ caution Board as per specification with necessary materials complete for H.T.lines and other equipments as required.(Danger Board Enamelled11KV)

Supplying and fixing 12x16 gauge barbed wire antidumping device (900 mm and3.5kg wire on pole) around the existing H.T. pole and sub station poles for safety measures as per IE rulesincluding allstaples & all other necessary materials complete as per mpseb specification.

Supplying, installing, connecting, testing and commissioning of approved make distribution transformer 3 star rating of accepted standard specification oil filled, core type aluminum wound out door type 11/ 0.4: KV step down with drain and filler . Value with locking arrangement two ear thing terminals, lifting arrangements and first filling of oil, conventional unit, including installation on existing D.P. structure.(B)100 KVA11/0.433 KV (Conventional) BIS CERTIFIED 4 Star Rated./ Level -II. (Assuming 25 years of life)

Supplying, installing, connecting, testing and commissioning of approved make distribution transformer 3 star rating of accepted standard specification oil filled, core type aluminum wound out door type 11/ 0.4: KV step down with drain and filler . Value with locking arrangement two ear thing terminals, lifting arrangements and first filling of oil, conventional unit, including installation on existing D.P. structure.(B) 200 KVA 11/0.433 KV (Conventional)BIS CERTIFIED 4 Star Rated./ Level -II. (Assuming 25 years of life)

Providing and fixing outdoor type pole mounting weather, dust and vermin proof L.T. distribution box made of 14/16 gauge, M.S. sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide antirust and corrosion treatment two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 200.KVA.transformer (with TPN switches200 amp) with required Amp MCCB/Isolator on incoming side and PF HRC units on outgoing side.(a) For 200/100 KVA Transformer (for 200 kva DTR using 600amp.Isolator of 9 SP of 120 A. J type al hook.) and 100 KVA DTR using 200 amp. of 6 SP mccb of 90 A. J type al hook.) Complete as required as per MP SEB latest Specification.

Commissioning of D P structure over existing support with panting in an approved manner consisting of following :- (A) D. C. cross arm with clamp, nuts & bolts (100 x 50 mm only ) - 1 set (B) 11 KV D. O. fuse unit, lightings arrangement and AB swich mounting channel with nuts and bolts (75 x 40 mm channel) of require - 1 set (C) 11 KV Polymer AB swich 400 amp as required ( set of 3 Nos.) - 1 set (D) Transformer mounting cross arms / channels with clamps nuts and bolts (100 x 50 mm channel ) - 1 set (E) 11KV Polymer Do fuse unit ( set of 3 no.) - 1 set (F)Transformer clamping set(50x50x6mm angle)with nuts &bolts etc.complete - 1 set (G)Transformerbeltingset(50x50x6mm angle) with nuts and bolts etc. complete -1 set (H) 11 kv polymer lightning arrestor(9kvgapless type(5kA)forDTR)(setof3No.)- 1 set (I) supplying , fixing, testing and connecting of complete earting set of 7 No.as per MPMKVVC.Ltd.circular No DSCOM/EZ/WS/1516/DT 17-03-2008 and approved drawing for transformer sub - station including all materials GI Strips,or wires,Charcoal power salt excavation of pits in all types of soils/rocks etc. as required complete .(1set of 5 Nos.) & ( 1 set of 2 Nos.) Chem rod earthing including electrode,chemical, (consisting galvanised mildsteelpipeof size 2000 mm x 50 mm outer diameteror higher size as per site conditions , filledwith a highly conductive material &a GIstrip minimum 16mmx3mm covering totalof pipe,forming theelectrode)forobtainingearth resistance less than 1ohms (J) Distribution panel mounting channel and clamp with nuts & bolts etc. (75 x 40 mm channel ) -1 set (K) Supplying , fixing, testing and Commissioning of DTR Meter( LT trivector energy meter,DLMS compliant category-A(for substation/feeder metring ), 3 phase 4 wire , 440 volts , 5 amp, accuracy class 0.5 S with GSM ( GPRS competeble) modem with box LT. 3 phase 4 wire 3X240 volts I 3 A. LTCT operated 3 phase 4 wire 3x63, 5 volts , LB = 5 amps lmax 10 amp trivector meter class of accuracy 0.5s DLMS complaint category a meter along with GSM ( GPRS compactable ) modems with box i/c all accessories and formalities as per MPMKVVCL as required. or 3P 4w - 5A LTCT class 5s DLMS compliant type c. rs - 232. Port box MRI LTCT 100/5A i/c meter box with TTB etc as required.(as per MPMKVVCL ITEM CODE NO-M-0302055)(L) SF & T and HT tape for covering LT bushing i/c windings and blower hitting complete minimum 30 meter or as required. D.P. Structure Complete as above (A to L)

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.(A) Supplying laying testing&commissioning.UnArmoured single core XLPE insulated aluminum conductorcable.UnArmoured singlecoreXLPE insulatedaluminumconductorcable.150sq mm.

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.(A) Supplying laying testing and commissioning.UnArmoured single core XLPE insulated aluminiyam conductorcable.single core XLPEinsulatedaluminumconductorcable.300sq mm.

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.(A)Supplying laying testing and commissioning.UnArmoured singlecoreXLPE insulated aluminumconductor cable.XLPE insulated aluminum conductorcable.70 sq mm.

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.(B)Armoured3½core XLPE insulated aluminum conductor cable. (b)70sq mm.

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connectionthrough lugsby cramping method glands etc as required as per specification.(B)Armoured4coreXLPEinsulatedalu.conductorcable.16sqmm.(Forstreet light)

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.(B) Armoured 2 core XLPE insulated aluminum conductor cable.(c) 2.5 sqmm 2 core armourad cable For street light connection

Supplying fixing testing GI Wire 8 SWG for gardings.(4 mm .dia.)

Supplying & installation of suitable class G.I.(’B’ class) protective pipe including cutting making thred providing sockets bend, elbow, nuts & bolds of approved manner as required to complete the job fixed on wall, poll or laying in ground trench i/c excavation in all type of solid/rock in an approved to manner as required.(A)G.I. Pipe ‘B’ class 50 mm dia. for protection forunder groundcableWith requird size.of cablechamberaspersitecondition

Providing and fixing chain link fencing sourriding existing DTR S/S finical (total 37 running meter maximum) of 6’ height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size.(B)MSstripof(25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2nos. 2.5’X5’) of MSangle(50X50X6)mm.bracingof 25X5mmflatwith mesh & locking arrangement.Complete as above( A to C) – one job.

Supplying & installation of suitable class G.I.(’B’ class) protective pipe including cutting making thred providing sockets bend, elbow, nuts & bolds of approved manner as required to complete the job fixed on wall, poll or laying in ground trench i/c excavation in all type of solid/rock in an approved to manner as required. (A)G.I. Pipe ‘B’ class 40 mm dia.

Supplying & installation of suitable class G.I.(’B’ class) protective pipe including cutting making thred providing sockets bend, elbow, nuts & bolds of approved manner as required to complete the job fixed on wall, poll or laying in ground trench i/c excavation in all type of solid/rock in an approved to manner as required.(A)G.I. Pipe ‘B’ class 80 mm dia. for protection forunder groundcableWith requird size.of cablechamberaspersitecondition

SUPPLY FIXING,TESTING 11 kv ab switch polymer type 600 amp with complete fitting

Supplying Fixing And Testing Kit kat Box with 10 Amp SP 25 KA MCB Complete. for street light pole Complete As per Required by MPSEB Required.

Supplying of Providing &Fixing (CPVC) PIPES, Inter under ground/Expo on wall 18.7.6,100mm nominal outer dia. Pipes.as per required size of under ground cable

Supplying and installation, of totally enclosed dust, vermin and weather proof outdoor type cubical feeder pillar of required size, fabricated with 14 SWG CRCA sheet, free standing type with MS angle iron frame of size 50x50x5mm, 4 Nos. legs each of 1.2 meter long of 50x50x5mm angle iron etc., suitable sheet steel sloping hut type canopy on top of feeder pillar with 50mm projection on all sides of feeder pillar for protection against rain/weather etc. The feeder pillar shall be painted with 100 micron powder coating on all sides, door etc. after anti rust and anti corrosive treatment, vertical/ horizontal bus bar of required size and length, fixed on SMC sheet with insulators, GI hardware, neoprene gasket, inter connection with copper wires/cables of bus bar, switch gear, MCCB, MCB, Cutout or wherever required with suitable lugs of required capacity and size, providing earthing terminal bus bar of size 25x5mm with GI nut, bolts at outside of the panel with earth continuity GI strip 25x5 mm inside the panel with holes, providing engraved name plate with rating of incoming and outgoing feeder and house No., eye bolts, suitable cutouts with wire mesh jali for ventilation, detachable gland plates. The feeder pillar to have hinged type double door on front side with locking arrangement, including Godrej lock, separate chamber for incoming and outgoing MCCB/MCB etc. complete including supplying, fixing, connecting, testing and commissioning of the following materials and accessories:-LT FEEDER PILLER 6 WAY AND OUT DOOR TYPE CUBICAL FEEDER PILLER

(A) 2 No. - 160 Amp 25 kA b.c. at 415 Volt TP MCCB with copper neutral link, 1 set - 100 Amp. 2 no rating TPN aluminium busbar, . TPN 100Amp (2x16 no.=32+2no and 1x8no+2no with spare 2 no each feeder pillar) Complete as above

(B) 1 No. - 100 Amp 16 kA b.c. at 415 Volt TP MCCB with copper neutral link, 1set - 100 Amp. rating TPN aluminium busbar, (1) No.-32 Amp. 10 kA b.c. doublepole, 1No. TPN MCB for pump house Complete as above

Providing and fixing including Testing of LED fixture on street light pole, the fixture should be IP- 65, PF be 0.95 with 85% Power effecency at least of life span of (approxy)working 50,000 Hrs Housing be of Al. Dye cost including connection etc cable reqd. GI pipe braket nute & bolts etc. (Make Bajaj, Crompton, Havells, Surya, Philips, ) (A) 90 watt LED