Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 CrAccepted-AOC | ₹2.2 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹2.2 Cr+₹4.9 L (2.23%)Rejected-AOC E 4 90 1ST FLOOR ARERA COLONY BHOPAL 462016 | BHOPAL | BHOPAL | MADHYA PRADESH | 462016 | ₹2.2 Cr+₹4.9 L (2.23%) | L2 | Rejected-AOC L2 |
Tender Value
₹2.3 Cr
EMD Value
₹2.3 L
Closing Date
5 Sept 2023, 5:30 pmClosed
General Manager(EandC) M.P.L.U.N. Ltd, Div-Bhopal
2nd Floor, Panchanan Bhawan, Malviya Nagar, Bhopal
Interior, Renovation, Furnishing, Internal Electrification, Sound System, Civil and Other Allied works in USTAD ALLAUDDIN KHAN SANGEET AND KALA ACADEMY MADHYA PRADESH SANSKRIT PARISHAD, BADGANGA , BHOPAL.(M.P.)
2023_MPLUN_296925_2
MPLUN/EandC/Div-Bhopal/NIT10_1
Open Tender
Civil Works - Buildings
Turn-key
180 days
BADGANGA
As Per NIT, Tender Document and special Condition.
7 documents required · 7 mandatory
₹17,700
₹2.3 L
10 Oct 2023
4 Aug 2023
8 Sept 2023
5 Aug 2023
5 Sept 2023
28 Aug 2023
Amount
Executive Table Type-1 all tops shall be made of both side veneer faced MDF board 25mm thick and sides. Drawer, shelves etc of 18mm thick both side veneer faced particle board. Top shall have 90mm thickness all over the border with suitable reinforcement at bottom and teak wood beading. Executive table Type-I Size 3600 x 1080 x 750mm Make : Godrej / Wipro / BTF / CSPL
Providing and fixing in position Auditorium High Back chairs of inner side size width (W1)490X480X1020 with push back mechanism having seat assembly made of polyuret lane oam mou ded with M.S. tubular frame insert which is upholstered with fabric. The structural should be as per technical specification as mentioned below :- Back :- Back of chair shall be 470mmX730mmX130mm upholstered constructed with 19mm thick ply having proper curvature for lumber support with PIT. moulded foam having density 40±51:g/cum, upholstered chair back to have plastic back shall duly embossed, bend and Formed by ABS. The back of chair should have provision of seat number and same will be provided by the chair supplier. Seat Chair seat size to be 480X490 with thickness of minimum 130mm with 19mm plywood this should be covered with minimum 120mm in P.U. foam, fully upholstered with P.U. moulded foam having density 45±5kg/cum. Side panels :- All side panel to be of 12mm thick plywood covered with fabric and fused with 25mm thick loam, side panel to cover all exposed metal part. The end panel of row should have provision of row number indicator with LED light. Arm rest:- 2nd class teak wood melamine Polished arm rest of size 425X.65X40mm of approved design will be fixed above side panels. Fabric :- The Fabric shall be inherent Fire Resistant Fabric, 100% Polyester Stretchable Circular knit. Fabric, of approved make , shade and design of minimum 400 GSM, quilted with foam bonded fabric of 5.0mm thick. (The shade and quality is to be finalized by Engineer-in-charge as well as by the client department.) Make : Godrej / Wipro / BTF / CSPL
EXECUTIVE CHAIR Premium chair high back type-1 overall dimensions:- W640mm x d700mm x h1180 to1300mm, seat size 500mm x 500mm (minor side), back size 500mmx 750mm (outer side). Seat and back shall be made of 12mm ± 1mm thick hot pressed ply. Seat fitted with 50mm foam density with topping of 35mm foam and soft foam making double layer. the back shall be designed with contoured lumber support of extra comfort. Back of the chain shall be covered with the leather and soft foam. Handel of the chain shall having width 70mm approx. in one piece. The chan shall be front type syncro tilt mechanism with 360 degree revolving. the pedestal shall be injection moulded in black 30% glass filled nylon with gas lift mechanism width 700m, steel inseted with twin castor wheels. Seat and back shall be covered with superior quality leather. Make : Godrej / Wipro / BTF / CSPL
VISITOR CHAIR WITH ARMREST TYPE-II- Overall dimension:-D-590 x W-630 x H-815mm Seat Height:- 450mm Seat size:- W490mm, D430mm & back size:- W485mm x H450mm, Material: The seat and back shall be made of 12mm thick hot pressed Ply and wood, upholstered with high quality fabric & molded polyurethane foam of 45-50 kg/cum density and 60mm thick. The foam shall have designed with contoured lumber support. Fabric cost Rs. 300/- Mtr. app., Armrest: the armrest shall be made in one piece polyurethane reinforce with MS insert. Frame: The frame shall be made of CR tube 25x1.8 Dia. in cantilever shape reinforced at load bearing bands from inside. Back-ABS plastic cover. The overall appearance of the product shall be as per photograph. Make : Godrej / Wipro / BTF / CSPL
SINGLE SEATER SOFA- Sofa Type -V. Over all dimension L-580 x D-803 x H-864 Sofa structure shall be made of 45x28mm teak wood section. The structure shall be fitted with rubberized belts of 50mm witdth or with helical springs. Sofa Shall be made with 150mm thick 32 density PU foam. Good Quality Pure leather shall be used for upholstery on sofa sets as per approval. Sofa Type -V. Over all dimension L-580 x D-803 x H-864 Make : Godrej / Wipro / BTF / CSPL
Centre Table overall size 1000 L x 500 W x 400 H (mm). Top made of teak wood sections 1000x100x10mm. Frame made of 72x22mm sections. Leg shall be out of 75x75mm. Two cross support of 28x22mm. Melamine polish of approved colour. Make : Godrej / Wipro / BTF / CSPL
LAMINATED KEY BOARD TRAY Laminated key board tray shall be made of Fixing on it the 8mm thick ply finished with 4mm thick veneer duly melamine polished of approved shade.as per approved and fixed on frame as per drawing / specifications and design with all the necessary fixture. basic rate of veneer is Rs. 1650.00 per sqm . all work shall be carried out as per detail drawing and instruction of architect / engineer in charge. Make : Godrej / Wipro / BTF / CSPL
Providing & Fixing of 24-Port Data Switch of (Giga Switch (10/100/1000) Make: D-link/Cisco/Netgear
Main Speakers - Supplying, installation, testing & commissioning of Point source Far Field: Compact 2-way Loudspeaker with 2 x 8” LF, 700 W @ 8 Ohms, 90° x 50° Make - JBL/ CSC AUDIO/ FIDELITY
Main Speakers -Supplying, installation, testing & commissioning of Point source Near Field: Compact 2-way Loudspeaker with 2 x 8” LF, 700 W @ 8 Ohms, 120° x 60° Make - JBL/ CSC AUDIO/ FIDELITY
Wall/Ceiling Mount Bracket - Supplying, installation, testing & commissioning of wall/ceiling brackets for above main speakers Make - JBL/ CSC AUDIO/ FIDELITY
Main Subwoofers: Supplying, installation, testing & commissioning of High Power Single 15" Subwoofer, 800 W @ 4Ohms Make - JBL/ CSC AUDIO/ FIDELITY
Front Fill Speakers: Supplying, installation, testing & commissioning of Ultra Compact 2-way Loudspeaker with 2 x 5.25” LF, 225 W, 90° x 90° Make - JBL/ CSC AUDIO/ FIDELITY
Wall Mount Bracket - Supplying, installation, testing & commissioning of wall brackets for front fill speakers. Make - JBL/ CSC AUDIO/ FIDELITY
Control Room & Green Room Speakers: Supplying, installation, testing & commissioning of Comatct two-way 5” speaker, 75 W, 100° x 100° Make - JBL/ CSC AUDIO/ FIDELITY
Stage Monitors Speakers: Supplying, installation, testing & commissioning of 2-way Powered Loudspeaker with 1 x 12” LF, 350W Make - JBL/ CSC AUDIO/ FIDELITY
Amplifier for Main Speakers: Supplying, installation, testing & commissioning of 2 Channel Amplifier with 1200W per channel. Make - JBL/ CSC AUDIO/ FIDELITY
Amplifier for Front Fill Speakers: Supplying, installation, testing & commissioning of 2 Channel Amplifier with 1000W per channel. Make - CROWN / CSC AUDIO/ FIDELITY
Amplifier for Control Room Speakers: Supplying, installation, testing & commissioning of 2 Channel Amplifier with 225W per channel. Make - CROWN / CSC AUDIO/ FIDELITY
12In 8Out Digital Audio Processor Make - BSS/ CSC AUDIO/ FIDELITY
MIXER- Supplying, installation, testing & commissioning of 12 Channel Mixer having2 configurable auxiliary buses XLR-type and ¼? metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 2-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs and mix output Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable Make - SOUNDCRAFT/ YAMAHA/MACKIE
Providing & Fixing of Vocal Microphone having Frequency Response : 50 to 15000 Hz, Polar Pattern : Cardioid, Sensitivity : -54.5 dB/Pa, Rated Impedance : 150 ohms.Make - SHURE/AKG/SENHISHER
Providing & Fixing of Vocal Microphone having Frequency Response : 50 to 15000 Hz, Polar Pattern : Cardioid, Sensitivity : -54.5 dB/Pa, Rated Impedance : 150 ohms. Make - SHURE/AKG/SENHISHER
Supplying, installation, testing & commissioning of Rugged 30 cm gooseneck module, programmable mute switch (on/off, push-to-talk, push-to-mute), high RFI immunity, LED ring, XLR connector. Make - SHURE/AKG/SENHISHER
Providing & Fixing of Handheld/Lavalier Wireless System - Cardioid Lavalier Condenser Microphone, Bodypack Transmitter, and Diversity Receiver. Make - SHURE/AKG/SENHISHER
Providing & Laying of 2-core 2.5 Sqmm. Shielded Twisted pair loudspeaker cable.
Providing & Laying of 2-core 4.0 Sqmm. Shielded Twisted pair loudspeaker cable.
Providing & Laying of Special 2-core shielded Mic Cable.
Supply, Installation, Testing & Commissioning of Connectors & Accessories
Supply, Installation, Testing & Commissioning of 24 U Floor standing AV Rack. Note:- The Bidder Shall quote his own rates for item rates 1 to 30
Bidder Name
Amount
Creating Space Private Limited(GSTN-23AAGCC3854R3Z5)
CHATURLAL CONTRACTOR(GSTN-NA)
Creating Space Private Limited
Creating Space Private Limited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .