PROVN OF 2 X TOILET BLOCKS IN 271 TRANSIT CAMP AT MIL STN KALKA UNDER GE JUTOGH

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil, comlete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation, footings, laying cable etc in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) as in foundation of coloumn, footings, plinth beams, bases for columns , basement slabs etc. using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for RCC M-25 (design mix) as in columns, pillars, piers, posts & struts using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumers lintels over 1.5 m span etc.complete all as specified and directed.

M & L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded crushed stone aggregate as in chajjas/shelves etc. complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations , footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation and plinth beams and similar work vertical or batter for fair finish surface complete all as specified and directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns & stanchions incl fair finishes of surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for rough finish surface complete all as specified and directed.

Use and waste of form work to sides & soffits of floor or roof beam beam haunchins girders bressumers lintels cantilevers shelves including over hang supports etc. for rough finish surface complete all as specified and directed.

Use and waste of Formwork to chullah hoods chajjas trough and similar items for rough finish surface complete all as specified and directed.

M&L for 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 6 to 8mm dia TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5mm dia and over up to 10mm dia bars as in strirups spacers binders etc complete all as specified and directed.

M&L for brick work with Sub class 'B' brick straigth or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished & even and smooth mixed with water proofing compound complete all as specified and directed. Note : WPC will be measured and paid separately under respective item of BOQ

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on ceiling finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for hard core of broken stone or boulders of guage not exc. 63mm deposited spread & levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7-8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 20mm thick screed bed in CM (1:6) complete all as specified.

M&L for Non Skid ceramic coloured tiles 7-8 mm thick (square/rectangular) area of each tile ecx 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match fixed over and including 10mm thick plaster in CM (1:4) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over and including chalk whiting priming coat complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats cement base paint complete all as specified and directed.

M& L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

Spreading and levelling in layer n.exc 25cm including well ramming watering of excavated material under item no 1 complete all as spd

Removing excavated material to a distence n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S& F 3 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples or with wooden beading complete all as specified and directed.

M&L for preparation of new steel surface of any descripton over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L mild steel framed work such s grill grating etc with end of bar shouldered riveted or forged in to spikes confirming to Fe-290(Gde-E-165) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with and including water proofing compound of approved make as per manufacturers instructions complete all as specified and directed.

Supply only water proofing compound as approved complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25. (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size complete all as specified and directed.

S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in tranches or in floor complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends jointed with approved adhesive complete all as specified.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore with access door jointed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) vent cowl of size 110 mm bore complete all as specified and directed.

S F PVC (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F salt glazed stoneware gully trap 125x100mm, squre or round mounthed setting and jointing drains wirh CM 1:1, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketd, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S/F PVC (SWR) bends plain 75 mm bore with access door complete all as specified and directed.

S&F Rotational moulded polythelene water storage tanks (three layer) of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe or brass ferrule and fixed 20mm bore complete all as specified and directed

S & F 20mm CI gate valve ,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 15mm CI gate valve ,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore stop valves cast copper alloy with chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S&F 15mm bib taps cast copper alloy with crutch or butterfly handle with chromium plated screwed down for iron pipe complete all as specified and directed.

M&L 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S & F wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size and making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F Vitreous China urinal bowl type flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast, cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and directed.

S & F vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap complete all as specfied and directed.

S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S & F 15mm bore PVC water connection 450mm long with brass nuts and fitted to 15mm bore of pipe complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S&F PVC grating 100 mm dia with waste hole of PTMT complete all as specified and directed.

S&F shelf of PTMT fixed with and including CP brass screws and wooden/plastic cleat (minimum wt-300gm) complete all as specified and directed.

S&F liquid soap container of PTMT fixed with and including CP brass screws and wooden/plastic cleat complete all as specified and directed.

S&F brass chromium plated shower rose, 125mm size with or without swivel joints with chromium plated arm including fixing to steel pipe or union complete all as specified and directed.

S&F MS hat pegs solid body 125 to 175mm size complete all as specified and directed.

M&L for concrete bed to drain pipe in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.

M&L for salt glazed stoneware drain pipes of 150mm bore, grade-A, laid in trenches and jointed complete all as specified and directed.

M&L for precast cover slab in RCC 1:2:4, B-1, using 20 mm graded crushed stone aggregates for man holes set in CM 1:6 complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

M&L for chequered cement concrete tiles glossy finish 30cm x 30cm x 20-25mm thick, set jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed PVC Conduit (medium) not less than 20mm with fixing accessories, to be fixed for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed:-

One light /fan/bell point controlled by one, switch

One 5 pin 5/6 Amp socket on the same board

One 5 pin 5/6 Amp socket on independent board.

All as per item No. 82.00 above but for one 3 pin 15 Amp socket independent with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm.

S&F switch piano type 240 V, 6 Amp , Sp one way flush type complete all as specified

S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified.

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete with and including 9/10 Watt LED lamp complete all as specified.

S&F of sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amp rated bus bar and suitable for SPN MCB as incomer complete all as specified.

S&F MCB SPN 06 to 40 Amps 240V,10KA incl all termnials, fitting etc complete all as specified.

S&F MCB SP 06 to 40 Amps 240V, 10KA incl all termnials, fitting etc complete all as specified.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.

M&L for Exhaust Fan heavy duty 300 mm sweep 900 RPM including fixing arrangement complete with louver sutters and making opening in wall of suitable size completion all as specified and directed. Make: Usha Model Name AEROCLEAN PLUS For OIL & DUST FREE KITCHENS/ Crompton Model TRANS AIR 300 MM/ Bajaj

S & Fix LED mirror light 10 watt with diffuser, decorative type complete all as specified and directed. Make Crompton Greaves Cat Part No LCL-10-CDL / C&S/ Philips/ Wipro/ Havells/ Polycab.

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, completion all as specified and directed. Make : Havells Cat part No ENDURALINEARNEOBS20WLED840SPCWH/ Polycab Cat part No LDO0103023/ Crompton cat part No LCCLB-24-CDL/ Bajaj Cat Part No BCLSBAL 20W CW.

S&FLED Street Light Luminaries 45 watt fitting with driver having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V, including GI brackets of suitable size with nuts and bots of suitable size ,making connection from ceiling rose to LED light fitting with suitable cable size for connection complete all as specified and directed. Make :-CROMPTON Cat no - LSTP-45-CDL/ Bajaj Cat No BRTFG 45W LED I / Polycab Cat part No PCGLS T1 45 N.

Supply, Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power underground cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 6 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and as directed

M&L for Duct pipe double wall , corrugated HDPE 50mm outer dia , conforming to IS:14930 (Part- II) of approved colour with fittings for cable protection complete all as specified and as directed. Make: Dutron/SFMC Pipe/Finolex/Telerex

S.R.SHARMA & SONS

m/s jupiter builders