CERTAIN REPAIRS INCLUDING PAINTING, POLISHING AND RE-CANNING OF WOODEN AND STEEL FURNITURE AND CONVERSION OF CHARPOY GI WITH NYLON NEWAR TO CHARPOY GI PIPE WITH PLY WOOD TOP AT VARIOUS UNITS AT JUTOGH, SHIMLA AND CHAIL UNDER GE JUTOGH

Amount

POLISHING OF WOODEN FURNITURE:- M & L For preparation of old wooden polished surfaces with suitable sand paper / emery paper, well dusted and cleaning the surfaces, filling holes with putty and applying french polish (in one or more coats) of superior quality to achieve uniform smooth texture and high glossy finish complete all as specified & as directed, for the following wooden furniture items :-

Almirah medium wooden with shelves (Drg No. FD-19/19(m))

Bed Plywood top (Drg No. FD-246/247)

Locker bed side/ Locker (Drg No.DB/ FD-54)

Table dressing Ladies with mirror (Drg No. FD-251/378)

Table 3'X2' (900X600/760mm) (Drg No. FD-224/283)

Table Dining (120cmx90cm) (Drg No. FD/Map-II/03)

REPAIRS/RECANING OF WOODEN CHAIRS Removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide, 0.40mm thick for weaving in godrej pattern and 4mm wide plastic cane of 0.60mm thick for border work complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing (Seat) (Drg No. FD-261/ 280)

Chair Easy (Seat & Back) (Drg No. FD-229)

Chair dining (Seat) (Drg No. FD-279/ 262)

M&L for removing old unserviceable plastic seat and S&F new plastic seat by means of adequate steel screw and all as directed and as shown on drg . (Drg No. FD/Map-II/05)

M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitable for existing chairs of following description all as directed and shown on drg.

Chair Writing (Drg No. FD-261/ 280)

Chair Easy (Drg No. FD-229)

Chair dining (Drg No. FD-279/262)

Chair dining (Drg No. FD/Map-II/05)

M&L for removing unserviceable broken front legs and supply and fix new front legs made out of 1st class hard wood teak suitable for existing chairs of following description all as directed and shown on drg.

Chair Writing (Drg No. FD-261/ 280)

Chair Easy (Drg No. FD-229)

Chair dining (Drg No. FD-279/262)

Chair Dining (Drg No. FD/Map-II/05)

Removing unserviceable broken side/front/back wooden member of chairs and supply and fix new side/front/back wooden member made out of 1st class hard wood with 3mm dia holes at a spacing of 10mm to 12.5mm center to center along the length of member for canning, suitable for existing chairs complete all as directed and as shown on drg for following type of chairs :

Chair Writing (Drg No. FD-261/ 280)

Chair Easy (Drg No. FD-229)

Chair dining (Drg No. FD-279/262)

Chair Dining (Drg No. FD/Map-II/05)

Removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood of existing shape and size complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing (Drg No. FD-261/ 280)

Chair Easy (Drg No. FD-229)

Removing unserviceable broken bottom stiffener (center or side) and supply and fix new bottom stiffener (center or side) made out of 1st class hard wood complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing (Drg No. FD-261/ 280)

Chair dining (Drg No. FD-279)

Chair Dining (Drg No. FD/Map-II/05)

Preparation of wooden surfaces new or old (of repaired chairs) by scraping with sand paper, redusting and applying putty where required and polishing the surface with french polish to get glossy finish (with one or more coats) complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing (Drg No. FD-261/ 280)

Chair Easy (Drg No. FD-229)

Chair dining (Drg No. FD-279/262)

Chair Dining (Drg No. FD/Map-II/05)

Repair of Chair Varandah (Drg No. FD-256/259/359) Removing broken/ unserviceable cane (both seat & back) and Recanning the same with best quality plastic cane 4mm wide and 0.60 mm thick of approved make after cleaning thoroughly all the surfaces of chair incl required welding work for broken frame where required and re-dusting and applying one coat of synthetic enamel paint over a coat of red oxide primer of approved shade.

REPAIRS / PAINTING OF STEEL ALMIRAH & STEEL LOCKER (Drg No. FD-351/1031 & FD-243) M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (olive green) of inside and out side of almirah large steel with shelves complete all as specified and as directed.

All as per Srl Item No 10.00 above but Almirah medium steel with shelves ½ H x ½ S (Drg No. FD-351/1031 & FD-243/1032)

All as per Srl Item No 10.00 above but Locker Bed side Steel (Drg No. FD-1029)

Removing old unserviceable locks from Almirah large/Almirah medium steel/ Almirah large steel 1/2 HX1/2 S , Almirah medium 1/2 H x 1/2 S and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033)

Removing old unserviceable lock Assembly with 6mm thick bars round from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fix new lock assembly with 6mm round bars and lock plate with necessary fittings of approved quality complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/ FD-114/FD-1033)

Removing old unserviceable broken handles from Almirah large steel /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fix new handle with necessary fittings of approved quality complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033)

Removing torn out doors shutter of Almirah steel large /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and bringing the item to the original shape and re-fixing the repaired door shutters with suitable hinges complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033)

Removing the existing dented shelves from Almirah steel large/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S bringing the item to the original shape and re-fixing the shelves with necessary cleats/nuts/bolts complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033)

Removing the unserviceable shelves from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/ Almirah medium steel 1/2HX 1/2S and supply and fix new shelves made of 1mm thick CRCA sheet made to shape and size on drawing and fixing with cleats, nuts and bolts incl two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/ FD-114/FD-1033)

Removing the existing unserviceable legs from Almirah steel large /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fixing the new legs made out of 1mm thick CRCA sheet and fixed with welding/riveting as per existing size and duly painted with two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033)

REPAIRS TO BED PLYWOOD TOP (Drg No. FD-247& FD-246)

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed.

M & L for removing unserviceable plywood from both side of Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face (Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beading providing for both side of head board and 35mm wide 4mm thick teak wood beading for top of head board and all as specified and as directed.

M & L for removing unserviceable plywood from both side of Foot board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board incl 15mm wide 6mm thick teak wood beading providing both side of Foot board and 35mm wide 4mm thick teak wood beading for top of the head board and all as specified and as directed.

Removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class hard wood made to shape complete all as specified and as directed.

Removing unserviceable center rail from Bed plywood top and S & F new cener rail made out of 1st class hard wood made to shape complete all as specified and as directed.

Removing old unserviceable/ worn out existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1940 X 915mm of approved make and fixing with minimum 18 Nos 30mm brass screw for each bed complete all as specified and as directed.

REPAIR OF WOODEN TABLES: Removing unserviceable/ broken table top and S & F new table top made of 18mm thick pre-laminated particle board exterior Grade ( Natural teak finish) with 4mm thick teak wood beading all around the top, complete all as specified and directed, suitable for following type of tables :

Table 3' x 2' with drawer/ without drawer (Drg No. FD-224/283)

Table dining 6 persons (Drg No. FD-273/274)

Table dinning 120x90cm (Drg No. FD/MAP-II/03)

REPAIR OF SCHOOL CHAIR WITH HARD BOARD (Drg No. FD/E6/MAP/05)

Removing unserviceable seat and back from school chair and S&F PVC 4mm thick in single piece seat and back weight not less than 1.2 kgs each with adequate nos of steel screw, complete all as specified and shown on drawing.

Removing unserviceable hand board from chair school and S&F pre-laminated particle board of exterior grade of approved shade with standard size of PVC edging all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and shownon drawing.

SOFA SET CUSHOIN (Drg No. FD-281/ FD/Map-II/02):

Removing old unserviceable/ worn out cushion and tapestry cloth form sofa set 5 seater ( Set of 10 pieces) and supply of new cushion of size 21" X 22" X 4" thick foam with 40 density as approved by GE, covered with tapestry cloth of approved shade &quality over lining cloth duly covered and stiched complete all as specified and shownon drawing. Not : Cost of the tapestry cloth shall not be less than Rs. 250/- per meter.

Faom cushion cover only duly stiched one side zip of size 530 to 560mm as per sample approved by engineer in charge. Not : Cost of the tapestry cloth shall not be less than Rs. 250/- per meter.

Repair of Chair CB Steel with Arms (Drg No. FD-75(m))

M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and complete all as specified and as directed .

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and complete all as specified and as directed.

M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and complete all as specified and as directed.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and complete all as specified and as directed.

REPAIRS / PAINTING OF Bed hard (Drg No. FD/E6/MAP/08)

Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of bed hard hard top including welding wherever necessary complete all as specified and as directed.

Removing old unserviceable/ worn out existing plywood top from bed hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1974x930mm of approved make and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and as directed.

REPAIR OF CHARPOY GI PIPE 32MM WITH NYLON NEWAR : (Drg No. FD-220)

M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm and supply and fix new long rails of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.

Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in position short rails made out of old broken long rail obtained from taking down above item including threading on both ends complete fixing all as specified and shown on drg.

Taking out existing old broken short rail from Charpoy GI pipe and S&F new short rails made out of 32mm dia GI Pipe medium grade 900mm duly threaded at both ends and fixed to existing three way elbow complete all as shown on drg

Taking out existing old broken legs from Charpoy GI 32mm dia and providing in new legs in position made out of old broken short rails obtained from taking down above item and S&F 3mm thick 40mm dia MS plate welded at bottom of leg including threading on top portion and fixed complete all as specified and directed

Taking out existing old broken legs from Charpoy GI pipe and S&F new legs made out of 32mm dia GI pipe med grade incl 3mm thick 40mm dia MS plate welded at bottom of leg and threading on top and fixed complete all as specified and directed.

M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg.

M&L for removing unserviceable check nuts of 32 mm dia and S & F new check nuts 32mm dia 6mm thick of best quality and all as shown on drg.

M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia and Supply reweaving with light shade new nylon newar 50 to 55mm wide closely double knitted and complete all as specified and directed by Engr -in- Charge. (Weight of nylon newar shall not be less than 1.75 Kgs per charpoy and colour shell be white/light colour).

&F 1950 mm x 900 mm x 12mm thick BWR grade, type BB,commercial plywood,7 ply conforming to IS 303 of 1975 with 4 mm thick teak wood beading all around the ply wood edges and fixing ply wood with suitable size of counter sunk bolts,nuts with washer complete all as specified and directed

REPAIRS / PAINTING OF Charpoy IP Hard top (Drg No. FD/Map-II/01)

M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of Charpoy IP hard top including welding wherever necessary complete all as specified and as directed.

Removing old unserviceable/ worn out existing plywood top from Charpoy IP hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1930x850mm of approved make and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and as directed.

REPAIR OF BOOK CASE STEEL GLAZED (Drg No. FD-1028)

S& F of new 3mm pane glass of suitable size for door shutter of book case steel glazed.(No.s of glass)

Removing old unserviceable broken handles from book case steel glazed and supply and fix new handle with necessary fittings of approved quality all as specified and directed.

Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (olive green) of inside and out side of book cse steel glazed complete all as specified and as directed.

Removing old unserviceable locks from book case steel glazed and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of book case steel all as specified and directed.

Conversion of Charpoy GI Pipe with Nylon Newar to Charpoy GI pipe with Ply wood top (Drg No. FD-220)

M&L for removing the existing nylon newar from charpoy GI pipe and welding four mild steel square tubes 25mmx 25 mm x 16 gauge, 225 mm long on short rails at four corner of Charpoy GI pipe incl drilling holes for fixing plywood with suitable size of counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 2 Nos mild steel square tube 25mm x 25 mm x 16 gauge,850 mm long welded on long rails horizontally at equal distance incl drilling 04 Nos holes at equal distance forfixing plywood with counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 1950 mm x 900 mm x 12mm thick BWR grade, type BB,commercial plywood,7 ply conforming to IS 303 of 1975 with 4 mm thick teak wood beading all around the ply wood edges and fixing ply wood with suitable size of counter sunk bolts,nuts with washer complete all as specified and directed.

TEAPOY (Drg No. FD-232/278) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old parts complete all as specified and directed for following:-

S&F legs of Teak wood .

S&F long rails of Teak wood.

S&F short rails.

S&F top of 18/19mm thick prelaminated particle board ISI Marked standared exterior grade and 6mm thick Teak edging all around.

S&F stiffners of Teak wood.

Applying twoe coat of french polish to Teapoy after necessary preparation of surfaces .

PEG TABLE (Drg No. FD-277/384) M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified and directed for following :-

S&F the legs of Teak wood.

S&F long rails of Teak wood.

S&F short rails of Teak wood.

S&F top of 18/19 mm thick prelaminated particle board ISI Marked standared, exterior grade and 6mm thick Teak edging alround.

Applying two coat of french polish to complete peg table after necessary preparation of surfaces.

TABLE BED SIDE (Drg No. FD-276) M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified and directed for following:-

S&F the legs of Teak wood .

S&F of 12 mm thick ply wood with one side teak finish. make(Natianal/Duro/Green ply).

S&F of 6 mm thick ply wood commercial at back make(Natianal/Duro/Green ply).

S&F of 12 mm thick ply wood commercial at bottom make (Natianal/Duro/Green ply).

S&F of 12 mm thick ply wood commercial at shelves make (Natianal/Duro/Green ply).

S&F top of 18/19mm thick prelaminated particle board ISI Marked standared make (Archied/Novapan) exterior grade and 6 mm thick Teak edging alround the front and top.

Applying two coat of french polish to complete table bed side including necessary preparation of surfaces.

HAT STAND WITH MIRROR (Drg No. FD-233) M & L for carrying out repair/replacement of following parts of Hat Stand with mirorr as per drawing after dismantling the old parts complete all as specified and directed for following:-

S&F mirror shall be 55mm thick standard quality ATUL/Sanit Gobain duly electro copper plated on back shall be provided on the Black board.

S&F Teak board to be provided to the Hat stand.

S&F brass cap stand hooks to be provided.

All exposed surfaces shall be french polished.

TABLE OFFICE CLERK WOODEN (Drg No. FD-1002) M & L for carrying out repair/replacement of following parts of Table office Clerk wooden as per drawing after dismantling the old parts complete all as specified and directed.

S & F Top suitable for table made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F drawer made of first class hard wood (teak) as per drg

Cleaning and preparing old polished surface of table office clk wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed.

TABLE CENTRE/ TABLE CENTRE TWO TIER (Drg No.FD-274) M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.

Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

Legs made out of first class hard wood (Teak)

Long rails made out of first class hard wood (Teak)

Short rails made out of first class hard wood (Teak)

Stiffners of 2 tier table made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all as specified and as directed.

TABLE WRITING (Drg No. FD-275) M & L for carrying out repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified :-

Top of the table with 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan)as in top of the table including 6mm thick Teak beading all around.

Legs of Teak wood,

Long rails of Teak wood.

Drawer complete as suitable for table

Shutters and drawers of 18/19mm prelaminated particle board exterior grade, fixed with 2 Nos Hinges medium weight 75 mm with locking arrangements and handles all as shown in Drg.

Applying two coat of french polish after preparation of surfaces.

CHAIR DINNING LONG BACK FOR OFFRS (Drg No. - FD/E6/MAP/04)

S&F only seat 75mm thick 40 density foam (Size as per drawing) with fabric appvoved by GE

M & L for applying two coats of french polish to Chair Dinning after preparation of surface complete all as specified.

S&F hydraulic base for chair revolving for operating computer

Modern Enterprises