REPAIR /MAINTENANCE OF INTERNAL ELECTRIFICATION, WIRING , CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN, PEDESTAL FAN, FIXTURES AND OTHER CONNECTED E/M WORKS AT AFS MADH ISLAND UNDER GE (AF)THANE

Taking down carefully point wiring and removing from site such as (Light,fan socket or power) Complete including fitting and fixtures,fan regulators switch boards,switches,ceiling rose's lamp holder from existing batten PVC conduit/steel conduit wiring complete excluding light fittings and fans all as specified and making good to the disturbed surfaces to match with existing ,complete all as specified and as directed .

M & L for point wiring i repair complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC casing & caping, hooks , elbows, juction covers and junction boxes and sinking's for sunken GI terminal boxes Min 50mm deep ,suitable length and 1. 6 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with cadmium plated screwed and cup washers, duly grouting and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.

All as per Srl item No -02 here in before but for one socket outlet 5/6 Amp on independent board complete all as specified and directed

All as per Srl item No -02 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed

All as per Srl item No. 2 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed.

All as per Sl item No 2 herein before but with 4 Sqmm for phase & neutral and 4 sqmm for earth wire for AC point independent 15 AMP complete all as specified and directed.

All as Srl item No. 02 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed.

All as Srl item No. 02 here in before but for call bell point complete all as specified and directed.

M & L for point wiring with FRLSinsulated 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC conduit and accessories, concealed in wall conduit on ceiling (for fan/downlighter only) etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including pressed steel terminal boxes concealed in wall Covered with laminated sheet top cover of required thickness for mounting switches/ sockets/ fan regulators / bell push buttons etc fixed with cadmium plated machine screws and washers including making good the disturbed surface and painting the surface with color matching to the wall color all as specified for the following :-

One light / fan/bell point controlled by one way switch

One socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Sl item No 9 herein before but with 2.5 Sqmm for phase & neutral and 2.5 sqmm for earth wire for socket out let 15 Amps complete all as specified and directed.

All as per Sl item No 9 herein before but with 4 Sqmm for phase & neutral and 4 sqmm for earth wire for socket out let 15 Amps complete all as specified and directed

S & F in replacement switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S & F in replacement switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed.

S&F bell push flush type 5 Amp complete all as specified and directed.

S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed.

S & F in replacement switch socket combination independent 5 pin, type 5/6 Amps flush type complete all as specified and directed.

S & F in replacement switch socket combination independent 6 Pin, 15/16 Amps flush type complete all as specified and directed.

S & F in replacement Socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F in replacement Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed.

S & F in replacement modular switch 5/6 Amps single pole one way,one module including modular cover plate with frame and metal flush box complete all as specified and directed.

S & F in replacement modular switch socket combination 5 pin, type 5/6 Amps5 in 1 flush type including modular cover plate and metal flush box with frame complete all as specified and directed.

S & F in replacement modular switch socket combination 6 Pin, 5/16 Amps flush type including modular cover plate with frame and metal flush box complete all as specified and directed.

S & F in replacement modular switch 5/6 Amps single pole two ways including modular cover plate with frame and metal flush box complete all as specified and directed.

S & F in replacement modular socket outlet 5 pin 5 Amps flush type including modular cover plate with frame and metal flush box complete all as specified and directed.

S&F in replacement modular bell push 5 Amp including modular cover plate with frame and metal flush box complete all as specified and directed.

S & F in replacement modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete including modular cover plate with frame and metal flush box all as specified and directed.

S & F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

Taking down carefully existing serviceable LED Tubelight/ bulkhead/ security light/ recess mount fitting of any size and refixing the same to respective location after carrying out cleaning all the components of fittings, including replacement of nuts, bolts and connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connectorcomplete all as specified and directed.

S & F in replacement LED Tubelight fitting with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K,surge protection min 4 KVA and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed.

S&F in Repairs LED Light luminaries Square type 36W suitable suitable for Modular/pop/Gypsum ceiling with starter, connector block, etc,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible conductor of copper with PVC square blocks of size 600mmX600mm for fixing the fittingcomplete all as specified and directed.

Supply and fixing in replacement LED building security light fitting outdoor type 35 Watt 230 V AC surge protection 10 KVA outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.& Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed.

S&F LED lamp 9W for angle holder complete all as specified and directed.

S & F timer switch with astronomical timer switch min 8KW, 3 pole, 230 V suitable for street light control including all assessories complete set all as specified and directed.

S & F in replacement LED Water tight bulk head fitting 10 W,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.

S & F speed regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed .

S & F in replacement for Sub Main wiring with two single core 6 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping with and including PVC insulated 6 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) Note :- Two length of 6 Sqmm cable and one length of 6 Sqmm earth cable along with PVC casing caping will be measured as one running length.

S & F in replacement for Sub Main wiring with two single core 4 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping with and including PVC insulated 4 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) Note :- Two length of 4 Sqmm cable and one length of 4 Sqmm earth cable along with PVC casing caping will be measured as one running length.

M&L for Sub Main wiring with two single core 2.5 Sqmm FRLS insulated multistranded flexible copper conductor cable 660/1100 volts grade drawn in through rigid flexible PVC casing -n- caping/PVC conduit with and including PVC insulated 2.5 Sqmm single core multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly all as specified and as directed. Note:- 1. Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit. 2. Separate sub main wiring will be run for each accn

S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof IP 42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed .

S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof IP 42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.

S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

Supply and Fix in repairs of MCB SPN 40 Amps 240 Volts complete all as specified and directed.

Supply and Fix in repairs of MCB SPN 63 Amps 240 Volts complete all as specified and directed .

M&L MCCB DB verticle type made of sheet steel , powder painted with neutal bus bar 200 A, neutral link, IP-30-IK08 protection grade , 415Volts TPN with 8 way Double door complete all as specified and directed.

M&L MCCB DB verticle type made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-30-IK08 protection grade , 415Volts TPN with 4 way Double door complete all as specified and directed.

M&L MCCB TPN 100 Amps , 415Volts, 25KA ,3 Polecomplete all as specified and directed.

M&L MCCB TPN 160 Amps , 415Volts, 25KA ,3 pole complete all as specified and directed.

S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted TP & N 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.

S & F in replacement MCB ‘B’ series type suitable for 415 volts, 10 KA, AC supply 40 to 100 Amps, triple pole and neutral (TPN) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed .

Supply & fixing in replacement of meter box of size (0.9mX0.9mX0.2m) made of Polycarbonate shall have Transparent cover,should be weather/ vermin proof, anti-acid, anti corrosive, UV resistance, fire retardant, thickeness 2.25 mm double door,single opening with lock arrangement suitable for fixing 04 Electric meter & TPN DB box including taking down existing electric meters , refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 sqmm,properly painting complete and fixing in wall with suitable cutting,cement & brick work etc all as specified and directed .

S&F exhaust fan made of sturdy engineering plastic of 250mm sweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.

Supply and fixing in replacement anti suicide ceiling fan rod (12"/18"/24") white/brown, others including metallic as per need, MS pipe zinc plated pipe OD-19mm, thickness 1.8+/-0.05mm, Spring set grade 3 Carbon spring steel material, zinc plated, MSME tested, load of 22 kgs come on the anti sucide impact fan rod, the rod will get open from centre, spring inside will be expanded, fan clamp with rubber reel nut bolt & safety pin as suitable for ceiling fan complete all as specified and directed.

Supply & Fix in replacement LED flood light fitting 120 Watts , 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant ,Pressure die cast aluminium housing, heat resistant toughened glass with frame, uniform distribution ,including fixing arrangments with angle iron and suitable nut,bolt,washer etc on wall /on pole complete all as specified and as directed.

M & L for checking functionality of energy meter with test meter,note down initial reading and after fixing reading and make proper connection and refix on wall/meter box complete all as specified and as directed.

Taking down main Switches,MCB DB with MCBs complete all as specified and directed.

Taking down sub main wiring of any sizes complete all as specified and directed.

S & F LED retrofit lamp B-22 holder based with polycarbonate body and aluminium heat sink with warm white, 7W LED Lamp, all as specified and as directed by Engr-in-Charge.

S & F LED retrofit lamp B-22 holder based with polycarbonate body and aluminium heat sink with warm white, 9W LED Lamp, all as specified and as directed by Engr-in-Charge.

Material and labour Modular white cover plate with frame of following types complete all as specified and directed.

White cover plate with frame, 1 module

White cover plate with frame 2 module

White cover plate with frame 4 module

White cover plate with frame 6 module

White cover plate with frame 8 module

Material and labour Mouduler metal box flush type 1 /2/3 module complete all as pecified and directed.

Material and labour Mouduler metal box flush type 4 module complete all as specified and directed.

Material and labour Mouduler metal box flush type 6 module complete all as specified and directed.

Taking down ceiling fan/Exhaust fan/wall fan/ pedestal fan for repair/serviceing (i.e. winding/ greasing/oiling etc.), any sweep of any make and any type model, sealing cable end with tape, dismantling the blades , removing fan and deposite the blades/motor to store for repairing/serviceing complete all as specefied and as directed.

Hanging/fixing only ceiling fan/Exhaust fan/wall fan/ pedestal fan and connection up the point of cable from ceiling rose to fan complete all as specefied and as directed . Note: For the purpose of payment, the wire using ceiling rose to fan for connection shall be measured and paid seperate in approprite item and nothing extra pay for this item.

Material and labour for painting of ceiling fan of any sweep with blades, down rod for any size and type,scraping out of old paint, filling of cavities with filler preparation of body painting by spray with first quality synthetic enamel paint and writing of MES number complete all as specified and directed .

Material and Labour for painting of exhaust fan of any size with louvers, scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint over a coat of zinc primer and writing of MES number, complete all as specified and directed .

Material and Labour for painting of pedestal fan of any size and type,scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number , complete all as specified and directed.

Material and Labour for painting of wall mounted fan of any size and type,scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number, complete all as specified and directed .

Material and Labour for dismantlng and opening of stator and rotor,cutting and removing burnt unserviceable winding wire from slots, cleaning of slots, rewinding with super enameled copper insulated wire as per existing gauge, varnishing,heating assembling with wire stator coil to connector block and pre-wire for connector block to ceiling rose suitable size PVC insulaed sheathed 1100 Volts grade 3 core 1.5sqmm flexible round insulaed stranded copper condutors cable required at site condition and testing complete all as specified and directed for the following sweep fans of sizes as given below :-

Ceiling fan of 1200 mm sweep

Ceiling fan of 1400 mm sweep

Exhaust fan of 300 mm sweep

Exhaust fan of 450 mm sweep

Wall Mounted fan of 400 mm sweep

Pedestal fan of 400 mm sweep

S&F, in replacement of Capacitor 2.5 Mfd/3.15 Mfd 230 volts 50Hz complete all as specified and directed.

S&F, in replacement of Capacitor 4.0 Mfd 230 volts 50Hz complete all as specified and directed.

Supply and fixing in replacement anti suicide ceiling fan rod (48"/56") white/brown, others including metallic as per need, MS pipe zinc plated pipe OD-19mm, thickness 1.8+/-0.05mm, Spring set grade 3 Carbon spring steel material, zinc plated, MSME tested, load of 22 kgs come on the anti sucide impact fan rod, the rod will get open from centre, spring inside will be expanded, fan clamp with rubber reel nut bolt & safety pin as suitable for ceiling fan complete all as specified and directed .

S&F, in replacement of Ball bearing suitable for ceiling fan with Cat part No 6201/6202 complete all as specified and directed MAKE : SKF,TATA,NBC

S&F, in replacement of Ball bearing for Wall Fan/ pedestal fan of any size or sweep complete all as directed MAKE : SKF,TATA,NBC

S&F, in replacement of Ball bearing suitable for exhaust fan of 300 mm /450 mm sweep/size complete all as specified and directed .MAKE : SKF,TATA,NBC

S&F, in replacement of Gun Metal bush suitable for ceiling fan, exhaust fan etc complete all as specified and directed

S&F in replacement shaft for ceiling fan/exhaust fan as per existing size and shape complete all as specefied and as directed

S&F, in replacement of blade made of aluminium and suitable to existing colour/size of ceiling fan 1200/1400 mm sweep including bolts and washers complete all as specified and directed Make : Bajaj/Crompton/Orient /Usha.

S&F, in replacement of blade made of cast iron suitable to existing colour/size of exhaust fan 300 mm sweep with nut, bolt, washers complete all as specified and directed Make : Bajaj/Shakti/Crompton

S&F, in replacement of blade made of cast iron suitable to existing colour/size of exhaust fan 450 mm sweep including nut, bolt,washers complete all as specified and directed . Make : Bajaj/Shakti/Crompton/Usha

S&F, in replacement of blade made of aluminium/ PVC biody suitable to existing colour/size of wall mounted/pedestal fan 400 mm sweep including suitable size bolts complete all as specified and directed .Make : Bajaj/Shakti/Crompton/Usha

Supply only canopy made of PVC body suitable for existing ceiling fan/wall mounted/pedestal fan complete all as specified and directed .

Supply only bracket with frame Nut,Bolt,Rubbers etc suitable for exhaust 300 mm sweep complete all as specified and directed.

Supply only bracket with frame Nut,Bolt,Rubbers etc suitable for exhaust 450mm sweep complete all as specified and directed.

Supply & Fixing in repair of Electronic Regulator Step down type 230 volts, AC, 50Hz including taking out unserviceable regulator of any type complete all as specified and directed.

Supply and fixing in repairs of electronic dimmers, 450 watt, 240 volt, flush type on the existing phenolic/ Hylum laminated sheet as site requirement complete all as specified and directed .

Supply & Fix in repair of Exhaust Fan louvers of size 450 mm sweep as per sample of metal body with nut bolt and washers and anchor fastner for fixing complete all as specified and directed .

Supply & Fixing in repair of Exhaust fan louvers of size 300 mm sweep as per sample of metal body complete all as specified and directed .

Supply and fixing in repairs of Anchor fastner for hanging of ceiling Fan and necessary fittings complete all as specified and directed .

Supply and fixing in repairs hanging clamps, nut, boltswashers, spring washers, split sefty pin and rubber real suiable for ceiling fan complete all as specified and directed .

Material and Labour for PVC insulaed sheathed flexible type over all round insulated 1100 Volts grade 3 core 1.5sqmm stranded copper condutors cable required at site condition and testing complete all as specified and directed

S&F in replacement Plug Top 3 pin, 5-A, 230 Volt complete all as specified and as directed

S&F in replacement Plug Top 3 pin, 15-A, 230 Volt complete all as specified and as directed .

S&F in replacement flexible wire of size 23/0.0076 standered copper conductor complete all as specefied and as directed

Supply and fixing in repairs oscillation mechanism suitable for wall mounted fan/pedestal fan complete all as specified and directed .

Please Enable Macros to View BoQ information