SPECIAL REPAIR TO CERTAIN SMQS IN NP AREA AT AFS PUNE AND ADD/ALT TO CERTAIN SMQS IN NP AREA AT AFS PUNE UNDER GE AF LOHEGAON

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. liad in any type of motar all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

All as per Item No 07 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

M&L Glazed Ceramic Coloured Tiles, 350X250X7mm/450X350X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over 15 mm thick screed bed in CM(1:6) complete all as specified and as directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and smooth with out using extra cement complete all as specified directed

M & L for 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete wall/ceiling surfaces and finishing the surface even and smooth (without using extra cement) etc.

M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) using 20mm graded aggregate and set in CM (1:6).

M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors

Fixing only 15mm dia tubes, any grade, to walls and ceilings or laying in floors

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed

Fixing only 20mm dia tubes, any grade, to walls and ceilings or laying in floors

Cutting of existing steel tubing for alternation or addition of 15m m dia pipes all as specified and directed.

Cutting of existing steel tubing for alternation or addition of 20m m dia pipes all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not xc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed.

S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed

M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed.

Dismantling of PVC water tanks of exc 250 and n.exc 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene double layer water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S & F in repair 15mm bore angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 20 mm bore and fixed

S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repair 15mm dia CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed as approved complete all as specified.

S &F in repair 15mm dia stop valves cast copper alloy, screwed donw high pressure with crutch or butterfly handle screwed both ends for iorn pipe or for unions and fixed (concealed type) all as specified and directed.

S&F Sink made of stainless steel with drainage board1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed

S&F in repairs stainless steel kitchen plate rack of 0.65 mm thick of approved make with plugs, washers, over all size 750mm x 600mm complete all as specified and directed.

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls

-do- as per item no 48 above but 110mm dia

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia

-do- as per item no 50 above but 110mm dia

S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal all as specified and directed.

M&Lfor PVC (SWR) vent cowl of 110mm dia

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each

Taking down chowkhats with shutter n. exc 1.50 sqm all as specified

Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.

Taking down shutters of any description n exc. 1 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 Sqm each and refixing in other opening complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hardwood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M & L for 2nd class HW 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneeringon both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc all as directed and specified .

M & L for Factory made of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for plain cement concrete Type B-0 1:2:4 ( using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window,ventilator frame) and matching the repaired surface with existing one.

S & F 100 mm Butt hinges, medium weight, cold rolled mild steel.

S & F 75 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.

S&F 150 mm long,aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 250 mm long aluminium anodised sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed by Engineer-in-Charge.

M/L for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in Drg and as directed by Engr-in-charge.

-Ditto- as per item no 79 above but 12mm thick.

M&L for 0.90mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table all as directed by Engineer-in-Charge.

M&L for Ist class H.W. plain cover fillets exc 3.0 & n.exc 6.0 sq.cm square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W. sectional area n. exc. 6 Sqm.

S &F of 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F in repairs 150 mm long aluminium, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S & F in repair 100 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.

S&F in repair 250 mm long aluminium anodised sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Harrison rail 20 mm Dia(Curtain rod)s, of anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.all as specified and directed.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls over 3mm thick putty complete all as specified and directed.

M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on old plastered surfaces of walls all as specified.

M&L for preparation of newly plastered celling and applying three coats of white wash

M&L for two coat of white wash on ceiling including preparation of old surfaces.

M & L for Preparation of old painted wooden surfaces of any description having width/girth exceeding 10cm and applying one coat of synthetic enamel paint for material and labour complete.

M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.

M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and applying one coat of synthetic enamel paint for material and labour complete.

Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

M&L(SWG) gully trap 100mm setting and jointing with solvent cement.

S & F Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S & F Grating doom 100mm dia of stainless steel all as specified and directed.

M&L for Providing, cement concrete in chajjas type B0 1:2:4 using 12.5mm aggregates including neessary formwork as directed

Demolition of Cement concrete of any description and in any position as sepicified and directed.

M&L 15 mm thick plastering in CM 1:4 finished even and smooth by usiing steel trowel and using WPC for sunken treatment. (WPC shall be measured separately)

Supply only Liquid water proofing compound

M&L for Applying acrylic cementicious plymer modified elastomeric waterproofing & protective coating as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion.

M&L for PCC 1:4:8 Type D-2 using 40mm graded aggregate as in foundation filling and mass concrete

Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Parmanand Enterprises

R k construction

SHAH BUILDERS

RK ENTERPRISES

santulan & Company

N AND G CONSTRUCTION