Construction of toilets at various public places, community locations, schools etc. falling under the affected areas of Teesta-V power Stations.

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size).

Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) in cluding carriage of bricks up to work site, curing etc all complete.

Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1 cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. 1:1.5:3 (1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm & down size).

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber Floor slab, roof slab, landing, balcony and access platform.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber Beam, lintels, girders, bresumers and cantilevers

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber from work for mass concrete work. Foundation, footings, base of column etc for mass concrete.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber Square Columns

Supplying, bending and placing in position tor-steel reinforcement in all R.C.C Works including cost of binding wires, all complete.

Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.1:4 Mix

Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.1:3 Mix

Neat Cement Punning

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer‘s specification & drawing. 30 mm thick plain PVC door shutters

Providing, fitting and fixing steel windows and ventilators of standard rolled steel section joints mitered and welded with iron lugs embedded in cement concrete 1:3:6 including providing fitting and fixing 3 mm thick glass pans with glazing clips and special metal putty complete with MS grills @ 150mm c/c as per the direction of Engineer - in- Charge all complete:

Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 580 mm size with 100 mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32 mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Long type or Orrisa type pan

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE : One wash basin with one pillar cock.:45 cm x 30 cm

Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compacting and the cost of fittings) all complete.15 mm dia G I pipe

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO /EQUIVALENT):STOP COCK 15 MM DIA (CONCEALED WORKS)

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO /EQUIVALENT) :BIB COCK LONG BODY 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO /EQUIVALENT): BIB COCK

Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent):500 LITERS CAPACITY

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 100 mm dia. PRINCE / SUPREME or equivalent soil Pipe

Providing and fitting of slandered size mirror of quality equivalent to Admiral and size 20"x16" complete

Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats

Providing and Laying white or coloured or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo, colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing and Laying white or coloured glazed tiles antiskid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and washing with three or more coats of snowcem, durocem, cemcoate etc. of approved quality and manufacture on exterior walls to give an even shade including preparation of surface on New surface complete

Providing and distempering with oil bound washable acrylic distemper two or more coats of approved brand or manufacture over a coat of cement primer to give an even shade on new surface including preparation of surface etc complete

Painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c clearing the surface complete on new surface.

Providing and laying plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand,8 clean hard graded stone chips of 40mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in charge.