Reorganization of 440V OH line for Lal

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1cement: 3 coarsesand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Erection of all aluminium conductor of 7/3.35 mm to 7/4.00 mm diameter including binding etc. as required

Dismantling of overhead lines comprising of copper/aluminium overhead conductor, G.I. wire cross arms, insulators etc. as required.

Supplying of two lengths of channel iron 75mm x 40mm x 6mm (7.14kg per metre) double pole cross arm for three wire 11KV overhead line conductors complete with through bolts and nuts for clamping of the poles, 50mm x 6mm N.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc. (as per drawing) and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required

Erection of double pole 3 Wire cross arm for 11KV/22KV/33KV over head lines as required

Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm x 65 mm pin insulator with G.I. spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supply and providing of 6 SWG GI wire

Erection of cradle guard as required

Erection of GI wire no 8 SWG including binding etc as required

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required - 2x 2.5 sq mm

Providing and fitting clamps, bolts, nut etc.

supply and fixing of bend pipe for light fitting

Dismantling of pole/street light standard/strut embedded in brick ballast foundation etc. as required.

Transportation of new pole to working site and dismantled pole from working site to Store.

Dismantling of service connection for re-organization of OH line and re fixing the same after re-organization.

Total impact of GST for the purpose of CTC