Supply installation testing commissioning of 10 Cusec 12 mt head Horizontal Centrifugal pumping unit- 1 No as drought pump including allied eletro-mechanical works and providing installation of 250 Kva Transformer - 1No. In place of under capac

Amount

Design, Manufacture, Supply, Installation, Testing & Commissioning of horizontal centrifugal Pumping unit for LIS Lelhar Shott. The pumping unit shall have the following specifications:- PUMP:- Make = Wilo/wpil/Kirloskar/flowmore/m&p/ equivalent Discharge = 10.00 Cusec Dynamic Head = 12 Mtr. Speed ≥ 985 rpm Type of pump = Horizontal Mixed Flow End Suction/Split Casing. MATERIAL OF CONSTRUCTION: Impeller = CF8M Impeller Nut = Stainless Steel ASTM 351/CF-8M Casing lines/Wearing Ring= CF8M Impeller Shaft = Stainless Steel AISI 410 Stuffing Box = Cast Iron Gland = Bronze grade V of IS: 318 Fasteners = High tensile Steel Shaft Sleeve = stainless steel Pump Casing = Close fine grained Cast Iron conforming to IS:210 grade 20 MOTOR:- Type = Three phase, squirrel Cage, Electric Induction Motor Make = KBL/BHEL/ABB/Marathon/Crompton/ seimens/ equivalent Rating = 75 H.P Speed ≤ 1000 (Synchronized). Operating Voltage ≥415 + 10 % Volt Frequency = 50 + 3% Hz Class of insulation = F Type of Duty = Continuous Type of enclosure = TEFC. The motor shall confirm to IS: 325 with latest amendments. The pumping unit shall be complete with Mild Steel Base Frame, fabricated as per IS 226 or IS 2026, requisite number of Foundation Bolts, and Pump - Motor coupling. Third party inspection certificate from CEIL/RITES shall be enclosed

Providing, Supply, Laying and Fitting of XLPE insulated 1.1KV 1-core 180 sq. mm un-armoured Aluminium cable (60 meters) covered with suitable PVC/ rubber sleeves for cabling of electrical equipment. The job includes crimping of the terminal ends of the conductor with hydraulic tool and providing and fitting of corresponding Aluminim lugs. The conductor shall be of reputed make preferably Grand lays/ Havells/ Polycab/ equivalent and shall be as per relevant IS specifications. The Cost includes providing of 07 number (each) Ring Spanner and Double ended Spanner of size 12/13,14/15,18/19,21/23,24/26 , 30/32 and 34/36 of Taparia make.

Providing and fitting of 400 AMP, 3-pole 415V MCCB with adjustable thermal and fixed magnetic setting having 50 KA breaking capacity Ics = 100% Icu (Make: L&T DN2 Series).The job comprises of improvement to the existing Main panel by way of replacement of existing damaged voltmeters and Ammeters by digital meters.

Providing, Installation, Testing and Commissioning of oil immersed naturally air cooled (TYPE ONAN) , Outdoor type, three phase, 50 Hz , 11KV/440V-250V step down distribution transformer Aluminum Wound of 250 KVA Level-2 capacity confirming to IS-1180 at Lift Irrigation Scheme Lelhar Shott, The transformer shall be provided with all necessary accessories like Breather, Horn gap, Lifting Lug, And suitable name plate duly embossed/Engraved, tap changer. The H.T transformer shall be manufactured /supplied incompliance with latest relevant IEC/IEEE/IS Standards. The technical specifications of the H. T. Transformer shall be as under. Standard :IS-1180 (Part-1) : 2014 Type : Outdoor, Oil Cooled, 3 Phase & Neutral Energy Efficiency Level : 2 KVA Rating : 250 KVA Rated Voltage H.V. : 11000 Volts L.V : 415 +-10%Volt. Frequency : 50 HZ Type of cooling : Naturally air cooled Primary Winding Conductor : DPC Aluminum. Secondary Winding Conductor : DPC Aluminum. The HT transformer shall be of reputed make as per relevant standards.The job includes providing and fitting of transformer belt made of suitable Angle Iron including providing and fitting of Clamps,nuts bolts , other necessary arrangements and improvement to the existing Transformer bed by providing and fitting of ISMC 100 of suitable length with proper arrangement as transformer bed.

M/s NETWORK ENTERPRISES (BID ID -2262519)