REPAIRS TO WOODEN/ STEEL BEDS/ CHARPOYS AND CHAIRS UNDER GE CHENNAI

Amount

ALMIRAH LARGE WITH SHELVES STEEL/ ALMIRAH LARGE 1/2H x 1/2S STEEL (FD-1031) Removing the following unserviceable parts from ALMIRAH LARGE WITH SHELVES STEEL /ALMIRAH LARGE 1/2H x 1/2S STEEL and supply and fix new components duly treated with one coat of red oxide primer complete all as specified and directed:-

Legs made out of 1mm thick MS sheet

Shelves made with 1mm thick MS sheet

Lock brass 6 lever with two keys chromium plated alongwith key hole plate

Shutters made out of 1mm thick PBI sheet

Removing the dents and bends and welding as required and preparing the old painted surface by smoothening with emery paper and applying two coats of synthetic enamel paint of approved quality with spray gun on EXTERNAL SURFACE of almirah large with shelves steel all as directed.

Removing the dents and bends and duly welded where ever required and preparing the old painted surface by smoothening with emery paper and applying two coats of synthetic enamel paint of approved quality with spray gun on INTERNAL SURFACE of almirah large with shelves steel all as specified and directed.

ALMIRAH MEDIUM/ SMALL WITH SHELVES STEEL (FD-1032) Removing the following unserviceable parts from ALMIRAH MEDIUM/ SMALL WITH SHELVES STEEL and supply and fix new components all as specified, shown on drawing and as directed:-

Legs made with 1mm thick MS sheet

Shelves made out of 1mm thick MS sheet.

Lock brass 6 lever with two keys alongwith key hole plate

Shutters made out of 1mm thick PBI sheet.

Removing the dents and bends and welding as required and preparing the old painted surface by smoothening with emery paper and applying two coats of synthetic enamel paint of approved quality with spray gun on EXTERNAL SURFACE of almirah medium/ small with shelves steel as shown in drg and as directed.

Removing the dents and bends and duly welded where ever required and preparing the old painted surface by smoothening with emery paper and applying two coats of synthetic enamel paint of approved quality with spray gun on INTERNAL SURFACE of almirah medium/ small with shelves steel as shown in drg and as directed.

Repair/ servicing of liver set of almirah large/ medium and small as specified and as directed.

BED PLYWOOD TOP (FD-246) Removing the following unserviceable parts from BED PLYWOOD TOP and supply and fix new components as shown on drg and all as specified and as directed:-

Head board.

Foot board.

2nd class hard wood long rail.

2nd class hard wood stiffener.

12mm thick plywood BWR quality TOP provided with 4 Nos of MS clamp of suitable size all as specified and directed.

M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.

BED HARD STEEL (FD/E6/MAO/08) Removing the following unserviceable parts from BED HARD STEEL and supply and fix new components as shown on drg and all as specified and as directed:-

M&L for welding to stiffener, legs and any parts of steel portion wherever required and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality on completed bed and all as specified and as directed.

S&F 12mm thick plywood BWR with screw of suitable sizes top complete and all as specified and as directed.

Head board of 18mm/ 19mm thick both side pre-laminated particle board with PVC edging complete and all as specified and as directed.

Foot board of 18mm/ 19mm thick both side pre-laminated particle board with PVC edging complete and all as specified and as directed.

Hard rubber shoes.

CHARPOY IP WITH HARD TOP (FD/MAP-II/01) Removing the following unserviceable parts from BED HARD STEEL and supply and fix new components as shown on drg and all as specified and as directed:-

M&L for welding to stiffener, legs and any parts of steel portion wherever required of charpoy IP with hard top and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality all as specified and as directed.

S&F 12mm thick plywood BWR with screw of suitable sizes top complete and all as specified and as directed.

Hard rubber shoes.

CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220)

Removing the unserviceable plywood top from Charpoy GI Pipe with plywood top and supply and fixing 12mm thick plywood commercial grade of size 1980mm x 900mm with rounded edges at four corners using 8 Nos MS bolts & nuts 6mm dia 75mm long with plate washers and fixing of MS clamp complete all as specified and directed.

Removing the unserviceable stiffener from Charpoy GI Pipe with plywood top and supply and fixing flat Iron stiffener 40mm x 6mm x 900mm fixed paralleled to short rail at uniform interval bolt shall be direct drilled through from stiffeners all as specified and directed. Note: Each flat iron stiffeners will be measured as single units.

CHAIR DINING OFFICERES (FD/MAP-II/04) Removing the following unserviceable parts from CHAIR DINING OFFICERS supply and fixing new components as shown in drg and all as specified:-

Foam cushion 75mm thick, 40 density for seat duly stitched with cloth tapestry of approved quality.

12mm thick plywood BWR grade for seat.

15mm x 30mm Teak wood vertical strips (Back rest stiffener)

35mm x 50mm Teak wood front leg and Nylon buffers

Teak wood rear leg and Nylon buffers

20mm x 25mm Teak wood stiffener.

M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as specified and directed.

CHAIR VERANDAH (FD-256)

Removing the unserviceable cane plastic from Chair verandah and welding wherever required, cleaning the welded portion and smoothening with emery paper and painting the complete with synthetic enamel paint, white colour including 4 Nos PVC shoe of required size to match the painted surface complete all as specified, shown on drawing and as directed.

Re-canning with cane plastic 3.5mm as shown in drg and as specified as per drg and as directed.

CHAIR WRITING OFFICERS (FD/E6/MAP/12) Removing the following unserviceable parts from CHAIR WRITING OFFICERS and supply and fix new components complete all as specified and as directed:_

Seat duly upholstered with polyester cloth and PVC lipping all round.

Back duly upholstered with polyester cloth and PVC lipping all round

Arm rest of suitable sizes and made of black integral skin polyurethane with 75-85 shore 'A' hardness & reinforced with MS insert with suitable screws for both arms complete all as directed.

Rubber stopper for MS tubular frame

CHAIR COMPUTER (FD/E6/MAP/01) Removing the following unserviceable parts from CHAIR COMPUTER and supply and fix new components all as specified and as directed:-

Caster wheel base fiber mould (heavy) with 5 arms push type wheel slot

Caster wheel set (5 Nos) fiber mould push & lock type

Hydraulic stem 300mm long

Seat base of size 275mm x 175mm with release lever

Arm rest with suitable screws for both arms

Seat & back cushion cloth polyester/ acrylic

TABLE COMPUTER (FD/E6/MAP/03) Removing the following unserviceable parts of TABLE COMPUTER and supply and fix new parts all as specified, shown on drawing and as directed:-

Top made of 18mm/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.

Bottom shelf made of 18/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.

Key board tray of size 450mm x 480mm made of 18mm/ 19mm thick pre-laminated particle board with 4mm thick teak wood beading.

Pull out tray (Mouse tray) made of 18/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.

Drawer 75mm deep made of 18/ 19mm thick pre-laminated particle board with knob

Telescopic channel for key board tray, pull out tray and drawer of suitable size.

Legs with nylon buffers of suitable size

Rectangular PVC cover size 25mm x 50mm made to shape

TABLE DRESSING LADIES (FD-251) Removing the following unserviceable parts of table dressing ladies and supply and fix new parts all as specified, shown on drawing and directed:-

5.5mm thick electro copper plated mirror of size 1250mm x 400mm .

Sliding glass of size 280mm x 260mm -2 No. duly grooved and fixed on aluminum channel of suitable size. Note: 2 Nos. of glass pane will be measured as a single unit.

Drawer made out of 18mm/ 19mm pre-laminated particle board one side natural teak shade & other side white with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated knob complete.

Bottom made out of 18mm/ 19mm thick particle board both side commercial.

Bottom frame made out of teak wood stiffener of size 40mm x 25mm alround alongwith 4 nos legs made out 45mm x 45mm x 150mm long with the bottom of 25mm x 25mm x 150mm with overall size 700mm x 200mm complete.

M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.

TABLE DRESSING GENTS (FD-230) Removing the following unserviceable parts of table dressing gents and supply and fix new parts all as shown on drawing and as specified and directed.

Top made out of pre-laminated particle board of natural teak shade 12mm thick of size 910mm x 310mm provided with 3mm thick teak wood edging complete.

Teak wood back plank of size 900mm x 300mm, 12mm thick as specified, shown in drg and as directed.

Drawer of size 300mm x 270mm made out of 12mm pre-laminated particle board natural teak shade & other side white on front side with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated knob complete.

Mirror 5.5mm thick of size 380mm x 760mm.

M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.

HAT STAND WITH MIRROR (FD-233) Removing the following unserviceable parts of Hat stand and supply and fix new parts all as specified, shown on drawing and as directed:-

Supply and fix 5.5mm thick electro copper plated mirror of size 440mm x 300mm.

Copper oxidised steel pegs of size 120mm x 75mm.

Supply and fix key plate with screw for wall mounting of 25mm x 40mm.

Teak wood edging of size 6mm x 35mm alround the plywood.

M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.

TABLE 3' x 2' STEEL WITH DRAWER AND WITHOUT DRAWER (FD-1007/ FD-1008)

M&L for replacement of old unserviceable table top with new top size 3' x 2' made out of 18/ 19mm thick pre-laminated particle board exterior grade of approved quality and shade with 4mm thick teak wood beading alround the top duly French polished complete all as specified, shown on drawing and directed.

M&L for welding to legs and any parts of steel portion wherever required of table '3 x 2' steel without drawer and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality and provide 4 hard rubber shoes complete all as specified, shown on drawing and directed.

M&L for welding to legs and any parts of steel portion wherever required of table '3 x 2' steel with drawer and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality and provide 4 hard rubber shoes complete all as specified, shown on drawing and directed.

TABLE 3'x3' STEEL (FD-1009)

M&L for replacement of old unserviceable table top with new top size 3' x 3' made out of 18/ 19mm thick pre-laminated particle board exterior grade of approved quality and shade with 4mm thick teak wood beading alround the top duly French polished complete all as specified, shown on drawing and directed.

M&L for welding to legs and any parts of steel portion wherever required of table 3' x 3' steel and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality and provide 4 hard rubber shoes complete all as shown on drawing.

TEAPOY VERANDAH (FD-255)

M&L for welding broken part of teapoy verandah wherever required and smoothening the surfaces with emery paper and applying one coat of synthetic enamel white paint and provide 4 Nos of hard rubber shoes to legs complete all as specified, shown on drg and directed.

S&F top made with18mm pre-laminated particle board with 4mm thick teak wood edging alround duly French polished complete all as specified, shown on drg and directed.

SRI CHAKRA CABINETS