PERIODICAL SERVICES , REPAIR TO WATER PROOFING TO CERTAIN BLDGS AND CONNECTED REPAIR AT SITE P, REPAIR REPL and CLEANING OF OH TANKS , REPAIRS REPLACEMENT TO JOINERY AND OTHER CONNECTED WORKS AT SITE R UNDER GE AF THANE

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises,complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) ,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.5mm grade aggregate) as in floor ,complete all as specified and as directed by Engr-in-charge.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) ,complete all as specified and as directed by Engr-in-charge.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including 15 mm thick rendering in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including 10 mm thick rendering in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

M&L for Vitrified Ceramic tiles light shade 8-10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for Vitrified Ceramic tiles light shade 8-10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:6 and pointed in white or colour cement to match ,complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10mm thick in CM 1:3 using water proofing compound in sunken portion of bath,kitchen sink & water closet (Note: WPC will be accounted & paid separately) .

M&L for hand cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for hand cut kota stone 18 to 20mm thick as in skirting /Dado, riser of steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of kota stone slab including, rubbing and mirror polishing laid over and including 10mm thick backing coat in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs ,orrisa pattern viterious china ware white glazed WC 580x440mm with integral foot rest and fix salt glazed stoneware traps "P" type with 100 mm bore of pipe fixed in repairs setting the trap and pan in 150mm thick all around lime concrete (1 lime : 2 sand) ,complete all as specified and as directed by Engr-in-charge.

S&F Vitreous china Basin white of size 550 x 400mm including fancy type pillar tab 15mm dia chromimum plated, waste coupling 32mm bore of PTMT and plug and proclained stopper including brackeets and 32mm dia PVC flush pipe etc,complete all as specified and as directed by Engr-in-charge.

S&F in repair low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float chain and ball bracket & capacity 10 ltr including 32mm PVC flush pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 15mm dia pillar tap quarter turn chromium plated cast copper alloy with capstan head,screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&Fin repair quarter turn bib tap 15 mm dia chromium plated cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in reapair quarter turn stop cock valves 15 mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in-charge.

S&F in reapair quarter turn stop cock valves 20 mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in-charge.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe ,complete all as specified and as directed by Engr-in-charge.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe ,complete all as specified and as directed by Engr-in-charge.

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors ,complete all as specified and as directed by Engr-in-charge.

M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors ,complete all as specified and as directed by Engr-in-charge.

S&F 32 mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed to walls, ceiling or in floor ,complete all as specified and as directed by Engr-in-charge.

S&F 40 mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed to walls, ceiling or in floor ,complete all as specified and as directed by Engr-in-charge.

S&F in repair PVC connectors 15mm bore 600mm long with brass connections & washers ,complete all as specified and as directed by Engr-in-charge.

S&F cast iron Nahani trap 100 mm with grating fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F cast iron Nahani trap 75 mm with grating fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Grating of 100 mm dia of PTMT fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Plastic Seat cover for pedestal pan ,complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, Mirror cabinet (400 x 500)mm (ISI Marked), fancy type ,complete all as specified and as directed by Engr-in-charge.

S&F quarter turn two way angle cock chromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe and fixed including all fixtures and fasteners for fixing to the wall ,complete all as specified and as directed by Engr-in-charge.

S&F stainless steel soap dish including all fixtures and fasteners for fixing to the wall etc ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs sink overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and as directed by Engr-in-charge.

S&F stainless steel (Minimum thickness 1mm) kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' , complete all as specified and as directed by Engr-in-charge.

Dismantling of 100mm (internal) cast iron/PVC drain pipes jointed in cement mortar and taking out , complete all as specified and as directed by Engr-in-charge.

Dismantling of 75mm (internal) cast iron/PVC drain pipes jointed in cement mortar and taking out , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with ruber ring joints fixed to wall , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) bends 110mm bore in mm any radius with access door , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) bend 75mm bore any radious with access door , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 110mm bore branch piece, single (Single 'Y') equal or unequal with acess door, complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 75mm bore branch piece, single (Single 'Y') equal or unequal with acess door , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 110mm bore WC connector with lip type ring , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement , complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 110mm bore in mm vent cowl , complete all as specified and as directed by Engr-in-charge.

S&F PVC(SWR) 75mm bore in mm vent cowl , complete all as specified and as directed by Engr-in-charge.

Rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.

Rendering 10 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified.

Rendering 15 mm thick (10 mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately)

Supply only liquid water proofing compound of approved make

M & L preparation of plastered or unplastered new surfaces of walls and applying two coat of distemper on Walls over a coat of alkali resistant priming paint , complete all as specified and as directed by Engr-in-charge.

M & L preparation of plastered or unplastered new surfaces of ceilings and applying two coat of distemper on ceilings over a coat of alkali resistant priming paint , complete all as specified and as directed by Engr-in-charge.

M&L for Preparing new plastered surfaces of wall and applying two coats of acrylic weather coat exterior paint over a coat of weather proof primer ,complete all as specified and as directed by Engr-in-charge.

Taking down carefully existing bitumen tarfelt including coba,plaster of any description over the surface of roof, terracess including flashings and junctions of parapete/curbwalls etc and removing of the rubbish to a distance exceding 500m but n exc 1.00 km and depositing ouside MOD land as directed, complete all as specified and as directed by Engr-in-charge.

Material and labour for providing plain cement concrete type B- 1, (1:2:4) using 20mm graded stone aggregate as in roof padding , in roof kerbs or mud stops, rounded or chamfered on edges laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after

Rendering as floor bedding screed 15 mm thick in CM (1:4) on concrete roof top and chajjas surface finished even and smooth (without using extra cement) to get uniform level surface for laying of membrane treatement,using integral water proofing compound (water proofing compound will be paid seprately)

M&L for APP modified roof treatment over existing RCC roof complete all as specified and as directed by engineer -in-charge and as specified here under Material and labour for water proofing treatment with APP based standard membrane of minimum thickness 3 mm in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Lit per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (3Kg/Sqm) with minimum 10cm side lap and 15cm end lap and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Lit/sqm prescribed by manufacturer complete all as specified.

M&L Brushing neat cement slurry with 3 kg of cement per sqm,complete all as specified and as directed by Engr-in-charge.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished the surfaces even and smooth and without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate, in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 of SSR P-II 2020, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed by Engr-in-charge.

Disconnecting existing PVC tanks of Capacity Exc 250 ltr & n. exc 500 ltr ,setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position , complete all as specified and as directed by Engr-in-charge.

Disconnecting existing tanks Capacity Exc 500 ltr & n. exc 1000 ltr ,setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position , complete all as specified and as directed by Engr-in-charge.

Disconnecting existing PVC water tanks of any description of capacity exc1000 &n exc2000 litre setting aside for repairs ,work over roof slab and hoisting if required, reconnecting and refixing in position, complete all as specified and as directed by Engr-in-charge.

M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 250 ltr & n. exc 500 ltr and from mounths of circulating pipes etc , complete all as specified and as directed by Engr-in-charge.

M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 500 ltr & n. exc 1000 ltr and from mounths of circulating pipes etc , complete all as specified and as directed by Engr-in-charge.

M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from months of circulating pipes etc , complete all as specified and as directed by Engr-in-charge.

Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store , complete all as specified and as directed by Engr-in-charge.

S&F 500 Ltr Rotational moulded polyethylene water storage tanks,triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and as directed by Engr-in-charge.

S&F1000 Ltr Rotational moulded polyethylene water storage tanks,triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and as directed by Engr-in-charge.

S&F 20mm Ball brass valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms , complete all as specified and as directed by Engr-in-charge.

S&F 20mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed , complete all as specified and as directed by Engr-in-charge.

S&F in repair 20mm Ball brass valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms , complete all as specified and as directed by Engr-in-charge.

Cutting existing 20mm steel tubing for alterations or additions in any position without taking down (Each cut measured) ,complete all as specified and as directed by Engr-in-charge.

M&L for writting date on tank with synthetic enamel paint , writing letters or figures (in block, roman, etc ) n exc 50 cm high as "CLEANED ON : DD/MM/YY"

M&L for Preparing new plastered surfaces of wall and applying two coats of white wash , complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) , complete all as specified and as directed by Engr-in-charge.

Taking down door Chowkat alongwith shutters Exc 1.5 sqm but not exc 4 sqm each , complete all as specified and as directed by Engr-in-charge.

Taking down Shutters of any description n exc 1 sqm each , complete all as specified and as directed by Engr-in-charge.

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each , complete all as specified and as directed by Engr-in-charge.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for partition frames and shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including nylon rollers/siliding window roller, maruthi locks/star lock, handles, concealed star lock necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws and all necessary fittings and fixtures etc all complete as per architectural drawings and the directions of Engineer-in-charge.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as directed by Engr-in-charge.

Supply & fixing sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane , complete all as specified and as directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing as mentioned is SSR P-II 2020, complete all as specified and as directed by Engr-in-charge.

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned is SSR P-I 2009, complete all as specified and as directed by Engr-in-charge.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated, complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats , complete all as specified and as directed by Engr-in-charge.

S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc , complete all as specified and as directed by Engr-in-charge.

M&L for Bands, straps,supports or stays for rainwater pipes, hold fasts etc complete allas specified and conforming to Fe-290 Gde-E-165 etc , complete all as specified and as directed by Engr-in-charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required , complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long , complete all as specified and as directed by Engr-in-charge.

S&F extruded aluminium alloy handles 150mm fabricated type, anodised complete , complete all as specified and as directed by Engr-in-charge.

S&F door sliding bolt aldrop 250 mm long aluminium anodised , complete all as specified and as directed by Engr-in-charge.

S&F in repair door sliding bolt aldrop 250mm long aluminum anodised , complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long , complete all as specified and as directed by Engr-in-charge.

S&F extruded aluminium alloy handles 100mm fabricated type, anodised , complete all as specified and as directed by Engr-in-charge.

S&F but hinges stainless steel 100mm long , complete all as specified and as directed by Engr-in-charge.

S&F Mild steel 200mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed by Engr-in-charge.

S&Fin repair mild steel 200mm ordinary rat tail rod pettern springs including roller and roller plate , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc , complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm , complete all as specified and as directed by Engr-in-charge.

S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.

S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm , complete all as specified and as directed by Engr-in-charge.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame , complete all as specified and as directed by Engr-in-charge.

M & L for 25 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame , complete all as specified and as directed by Engr-in-charge.

S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm , complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board , complete all as specified and as directed by Engr-in-charge.

S&F Aluminium handle 100mm size ,cast type, anodised , complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame , complete all as specified and as directed by Engr-in-charge.

S&F in repairs aluminium door closer hydraulically reguleted, designation No. 3 univarsal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg ,compete all as specified as directed by Engineer -in -charge

S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, with stainless stell cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area , complete all as specified and as directed by Engr-in-charge.

M&L for 5.5 mm thick ordinary quality and glazing in square exc 0.5 sqm in each pane , complete all as specified and as directed by Engr-in-charge.

M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10 mm thick backing coat in CM 1: 3 , complete all as specified and as directed by Engr-in-charge.

M&L for fixing in repair 25 mm matt finish Stainless steel curtain rod best quality , complete all as specified and as directed by Engr-in-charge.

M&L for fixing in repair Stainless steel socket bracket with bore of 25mm for dead end of curtain rod , complete all as specified and as directed by Engr-in-charge.

M&L for fixing in repair Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod , complete all as specified and as directed by Engr-in-charge.

M&L for fixing in repair Stainless steel projecting bracket to support curtain rod of size 25mm , complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as directed by the Engineer-in-Charge.

Ditto all as per Srl Item No 122.00 above but reinforced cement concrete

Supply only integral water proofing compound , complete all as specified and as directed by Engr-in-charge.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) , complete all as specified and as directed by Engr-in-charge.

S&F in repair, gun metal globe or gate valve bore dia of pipe in 15mm , complete all as specified and as directed by Engr-in-charge.

S&F in repair, gun metal globe or gate valve bore dia of pipe in 20mm , complete all as specified and as directed by Engr-in-charge. .

S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) , complete all as specified and as directed by Engr-in-charge.

S&F in repairs Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) , complete all as specified and as directed by Engr-in-charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) , complete all as specified and as directed by Engr-in-charge.

Materials & labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately,

M&L for preparation of surfaces plastered or unplastered including on old surfaces of walls and apply one coat of white wash on walls , complete all as specified and as directed by Engr-in-charge.

Ditto all as per Srl item No.132.00 above but on ceiling

M&L for preparation of surface plastered or unplastered old surface of wall and applying one coat of Oil bound distemper on walls , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of Oil bound distemper on walls , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of Oil bound distemper on ceiling , complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on wall , complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on ceiling , complete all as specified and as directed by Engr-in-charge.

M&L for complete removal of existing treatment on surface of wall etc in any position washing down with water and cleaning the surface from all loose dirt, chalk, grese, fungi, algal, flakes etc, and Finishing walls with Acrylic Smooth exterior paint of required shade : Old un decorated work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface plastered or unplastered old surface of wall and applying one coat of acrylic paint on wall , complete all as specified and as directed by Engr-in-charge.

M&L for Preparation of old steel surfacesof any description over 10cm width & girth not otherwise described and applying one coat of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old wooden surface of any description over 10cm width & girth not otherwise described and applying one coat of syithetic enamal paint, complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old wooden surface of any description over 10cm width & girth not otherwise described and applying two coat of syithetic enamal paint , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plaster surfaces and apply two coat of white wash on ceilings , complete all as specified and as directed by Engr-in-charge.

M & L for preparing newly plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , complete all as specified and as directed by Engr-in-charge.

M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on wall , complete all as specified and as directed by Engr-in-charge.

Safe Construction Co.

M/S VISHRANTA CONSTRUCTION