Loading…
Loading…
Tender Value
₹97.1 L
EMD Value
₹1.9 L
Closing Date
28 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRS
20 conditions · 9 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of Work for this tender: The similar nature work is "Satisfactory execution of any electrical work related to HT/LT installation". Tenderer should submit documentary proof in regard to fulfill these eligibility criteria along with their offer.
This eligibility criterion shall not be applicable to those Firms who are either OEMs or who are sources approved by RDSO for related works contracts. However, for other firms, work will be awarded only if they fulfill the following eligibility criteria. As-per Clause-10, of latest General conditions of contract of April 2022 & Rly. Board Letter No.2019/Elect(G)/165/1, dtd. 22.04.2020. For OEM's or RDSO Approved sources and exception shall be extended to PU's approved sources for tendered work: - No specific minimum eligibility criteria are required.
For sources which are not OEM's or sources not approved by RDSO and PU's not approved sources for tendered work, the minimum eligibility criteria will be applied as specified under Standard Technical criteria of this work.
Credential of Tenderer: The tenderers shall submit following documents along with their offer: Particulars of- I) Technical capacity ii) Past experience for "Satisfactory execution of any electrical work related to HT/LT installation". iii) List of machinery and plant available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work, testing facilities & quality contract set up etc. to prove that tenderers work has requisite facilities to carry out the work. iv) List of personnel, organization available on hand and proposal to be engaged for the subject work. v) List of works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of schedule completion of work, date of actual start, actual completion and final value of contract should also be given. vi) List of works on hand indicating description of work, contract value and approximate value of balance work yet to be done and date of award.
The tenderer must have a Valid electrical license 'A' Class. Note: CEA advisory file no-CEA-PS-16/25/2023-CEI Division, Dated: 20.11.2023 must be complied.
66 conditions · 3 needing a document upload
All the bidders/tenderers are advised to quote their offer rates at e-tendering schedule only. Any other document(s) in reference of offer rates, except undertaking asked, shall be treated as null and void and will not be considered for evaluation of offer. Bidders should ensure that their offer rates are inclusive of GST as per extant rules, transportation charges and all other charges/taxes, royalties payable by the contractor{s} to the Government or public body or local authority and no additional amount will be paid or claim entertained on this account by the Railway.
Firm has to submit bank details such as Name of the Bank along with Bank Branch code, account No., IFSC Code and PAN Number as per the format as ANNEXURE-I duly certified by the branch of bank.
Tenderer should submit documents related to IREPS Code (Vendor ID), Registration details, TIN No., registered address, email ID, Mobile no., GST Registration No. etc.
This tender complies with Public Procurement Policy (Make inIndia) Order2017, dated 15/06/2017, issued by Department ofIndustrial Promotion andPolicy, Ministry of Commerce, circulatedvide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017and 27/12/2017. A copy of PublicProcurement Policy (Make in India) Order 2017 is attached with descriptionname as "Public Procurement Order 2017" with this e-tender for reference.The tenderers are advised to go through the document and must quote accordingly.
Partnership Deeds, Power of Attorney etc.: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Registered Society / Registered Trust etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)In case tenderer is other than sole proprietorship firm, following documents shall be submitted by the tenderer: (a) Partnership Firm: The tenderer shall submit (i) a copy of Partnership Deed and (ii) a copy of Power of Attorney (duly registered as per prevailing law) infavour of an individual to sign the tender documents and create liability against the Firm. (b) Company registered under Companies Act-2013: The tenderer shall submit (i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (c)LLP (Limited Liability Partnership) Firm: If the tender is submitted on behalf of a LLP Firm registered under LLP Act-2008, the tenderer shall submit alongwith the tender- (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (d) Registered Society & Registered Trust: The tenderer shall submit (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.(iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society etc. shall be neither asked nor considered, if submitted.(v)A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions.(vi)The Railway will not be bound by any change in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate. Reference Para 15 of IRGCC-2022 (Works Matter), otherwise their offer will be considered incomplete and shall not be considered.
The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and up to 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable against that contract. In case a tenderer has not submitted Bid Security on the strength of their registration as a Start-up recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work. Note: If the tender is accepted on the quoted rates of bidders which is below the advertised tender value an additional performance security shall be submitted by bidder as below : (a) Below 0-5 % : 5% + Nil (Additional Performance Guarantee) = 5% (Total PG) (b) Below 5% : 5% + 5% (Additional performance guarantee)= 10% (Total PG).
One or more of the partners of the firm or any other person (s) shall be designated as the authorized person (s) on behalf of the firm, who will be authorized by all the partners to act on behalf of the firm through a "Power of Attorney", specially authorizing him / them to submit & sign the tender, sign the agreement, receive payment, witness measurements, sign measurement books, make correspondences, compromise / settle / relinquish any claim (s) preferred by the firm, sign "No Claim Certificate", refer all or any dispute to arbitration and to take similar such action in respect of the said tender / contract. Such "Power of Attorney" shall be notarized / registered and submitted along with the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society etc. shall be neither asked nor considered, if submitted.
In addition to Annexure V, in case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the qualifying criteria mentioned in the Tender Document and in tender document details.
PAYMENT CLAUSE: •100% progressive on account payment on quarterly basis (after deducting of penalty if any) will be released only after the acceptance of supplied material & successful installation, commissioning and testing. Payment of bills will be subjected to acceptance of railway along with the submission of the following documents: •All the claims for payment, i.e., contractor's invoices, shall be accompanied with joint inspection note and acceptance by the authorized representative of Sr. DEE/RS/CNB, guarantee certificate etc. for Supplies/Erection/Installations/testing & commissioning. •Security Deposit (SD)/ Performance Guarantee (PG) shall be released only in case of satisfactory performance of the Contractor. •Non-supply/delivery of Supplies/Erection/Installations/testing & commissioning, even after intimation from Railways shall mean Unsatisfactory performance and in such case Security Deposit (SD)/ Performance Guarantee (PG) shall be forfeited. •Payment shall be released after deducting suitable penalties OR suitable deductions for that billing period shall be calculated and marked for deduction from Contractor's SD/PG. Such calculation sheet/note shall be attached with each bill so that necessary deduction as made. •Payment for Supplies/Erection/Installations/testing & commissioning, will be processed only after submission of challan, invoice/e- invoice, warranty certificate, inspection certificate/acceptance letter from authorized representative of Rly etc. •All test reports (if any). •The payment to the contractor would be made through RTGS/NEFT/ECS system for which Tenderers are required to provide "Centre (City code), IFSC Code (Bank Branch specific No.), Name of Bank, Branch Code, MICR code, Beneficiary Name, Account No., IREPS Code & type of account" along with their offer as per Annexure-I in Tender Document Details. The above details are required to be certified by the concerned Branch of Bank.
It is extremely important to read the detailed PAYMENT CLAUSE. PENALTY CLAUSE along with SPECIAL CONDITIONS OF CONTRACT given as part -II in the attached document with description as "Tender Document Details" with this e- Tender.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i)A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii)The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid.(iv)The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi)The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document.(viii)If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
In case the bid security money is in the shape of Bank Guarantee then it should be supported by proper stamp duty, rate prescribed as per section 13 & 24 of the UP stamp Act, 2008 and amended from time to time at the time of submission of bank guarantee.
The option of payment through letter of credit (LC) has been enabled by Railway vide Railway board letter no. 2018/CE-I/CT/9 dated 04.06.2018, which is attached in the tender "LETTER OF CREDIT ARRANGEMENT". Tenderer is advised to read this document before quoting his offer. The conditions of Letter of Credit (LC) option are also given in the payment terms in the attached document with description as " Tender document details" with the e-tender.
Tenderer shall submit a copy of Declaration stating that no any Employee / Partner etc. is Retired Railway Employees of Gazetted Rank. (Format of declaration is attached as ANNEXURE-II). Non-submission of Annexure-II certificate duly signed along with date and stamp by the bidder shall result in summarily rejection of his/their bid.
Firm has to mandatorily submit the Tender Form (First Sheet) as per GCC April -2022 dully filled in prescribed format (Format enclosed) along with his/their bid. Non-submission of above Tender Form (First Sheet) by the bidder shall result in summarily rejection of his/their bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The cost of Bid Security as indicated in the NIT header shall be paid through online gate way/E-Payment facility provided on IREPS website only. In case payment of Bid Security is not successful during E-payment, the offer will be summarily rejected.
INSTRUCTIONS TO TENDERERS
The tenderer shall thoroughly go through the entire tender documents and strictly adhere the instructions and directions given at different pages.
Tender Document Cost is nil.
Unreleased Bid Security, if any, held with the Railway Administration, shall not be adjusted towards the Bid Security to be remitted.
All the required/supporting documents should be scanned and uploaded. All the document uploaded should be duly signed along with date and stamp.
If the Tenderer(s) deliberately give(s) wrong information/ incorrect documents in his/their tender or create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage. The entire Bid Security and any other dues available with Railway against that contract will be forfeited. Action will be taken to suspend the business with the tenderer for a period of two year. In addition, Administration reserves the right to prosecute under suitable law.
All terms and conditions in the tender documents are binding on the Tenderers.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
The Tenderers are advised to visit the site of work in their own interest and acquaint themselves with the site conditions and expected quantum of work and assess all the site specific difficulties to be experienced while executing the same and the rate shall be arrived duly considering all the facts above and quoted in the tender. Any representation at a later date specifying the site difficulties shall not be considered.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. In case the bid security money is in the shape of Bank Guarantee then it should be supported by proper stamp duty, rate prescribed as per section 13 & 24 of the UP stamp Act, 2008 and amended from time to time at the time of submission of bank guarantee.
The tenderer shall upload scanned copies of mandatory credential such as Experience, Turn over certificates and any other documents as applicable, all documents related to Partnership Deed/ Consortium/ MOU, should be up loaded at the time of submission of bid.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
The Contractor shall comply to all applicable labour laws and shall take all necessary precautions to ensure and preserve the health and safety of all staff deployed by him for this purpose.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall when so required by the Railway, make available such information, evidence and documents as may be necessary for such verification. Any verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any right of the railway thereafter.
In case any wrong information submitted by the tenderer, the contract shall be terminated, Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 (Two) years.
The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
General :- The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification
General :- If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018)
Advance Inspection Centre for inspection & maintenance activity of electric locomotives at ELS/CNB.
ELS-CNB-2026-27-RET-03~NCR
ELS-CNB-2026-27-RET-03
Open
Works - General
24 Months
Prayagraj, Uttar Pradesh
₹0
₹1.9 L
3 Sept 2026
3 Sept 2026
14 Sept 2026
99 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 97,12,529.21 | ||
| — | 350.00 | — | — | ||
| Supply, fitment and testing of LED ceiling panel light, Size: 2 ft. x 2 ft., Wattege : 36 watt,Make / Brand : Phillips/Polycab/Syska / Havells or similar. | — | — | — | 3,92,350 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning 15 watt, LED pit light(vertical light),5WX3 dimensional lighting as per sketch CLA/RS/MW/PITLIGHT/01 in different pits of loco shed kanpur. one set equals to (1)225 Nos pit light,warranty 5 Years(2) 3000 mtrs 2 core 4sq.mm XLPE insulated PVC seathed armoured aluminium cable(is 7098 part-1) with suitable lugs,clamps,saddle etc IP68 connectors Male/Female for every pit light for cable loop in and loop out including accessories like SS crew, suitable clamps etc.(3)Supply, Erection, Testing and Commissioning of Step Down Transformer (Min 3 KVA) 230V AC to 24V DC, Transformer shall feed up to Qty 180 Nos of fittings of 15W each, Including IP65/IP66 Outdoor Metal Box, Mounting Stand, 1 x Socket for Input & 2 x Socket for Output etc, Warranty 5 Years.(4)Supply, Erection, Testing and Commissioning of Step Down Transformer (Min 2 KVA) 230v AC to 24v DC, Transformer shall feed up to Qty 120 Nos of fittings of 15 Watt each, Including IP65/IP66 Outdoor Metal Box, Mouting Stand, 1 x Socket for Input & 2 x Socket for Output etc, Warranty 5 Years | — | — | — | 22,43,180 | |
| — | 40.00 | — | — | ||
| Supply and installation of flood lights 200 Watt IP ration 65/67 working life more than 50000 hours Warranty 5 years, efficiency 110 Lm/watt or above, including hardware for fixing. Make Philips,crompton,havells,osram | — | — | — | 2,37,520 | |
| — | 60.00 | — | — | ||
| Supply, installation, testing & commissioning of high bay type LED high bay Light fitting of 150watt.complete with lamp & connection with flexible,3-core,multistrand copper conductor, PVC insulated & sheathed wire of required size, including hardware for fixing of light. Make Philips, crompton, havells ,osram | — | — | — | 3,95,249.4 | |
| — | 100.00 | — | — | ||
| Supply, fixing & commissioning of 20 Watt batten integrated LED tube light with minimum lumen output 2000 including all other accessories required for erection of the same.Make- phillips,wipro | — | — | — | 16,086 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing and commissioning of 600mm sweep air circulator fan(industrial grade) wall/piller mounted including mounting accessories. | — | — | — | 1,62,991.8 | |
| — | 75.00 | — | — | ||
| Supply, fixing and commissioning of BLDC ceiling fan with all connected materials. (Make Havells, Atomberg or similar) | — | — | — | 2,04,277.5 | |
| — | 2.00 | — | — | ||
| Supply, Erection, testing and Commissioning of LT control panel cubical floor mounted type dust and vermin proof multi layer construction, weather proof copper ventilation arrangement, outdoor type LT distribution board for operation on 3 phase 4-wire, 415V AC supply system recondition with 14 SWG MS sheet base MS angle 50x50x6 mm MS Channel 75x40x6 mm. It shall be coated with 2 coats approved colour. The LT panel shall be of front operated with copper conductor cable, cable glands, earthing studs, feeder, name plate and danger board on front. The LT panel shall be erected on the floor. The panel shall comprises of 400 Amps bus bar with protection equipment, 01 Number incoming side 250A MCCB 50KA, 4X100 A MCCB 36KA, 2X63A MCCB 30KA and 05 Nos. 32A MCCB 3OKA. All MCCB should be 4-pole type voltmeter, Ammeter indicating lamps shall be fitted all incoming and outgoing side camplete with locking arrangement and all other required accessories as per site | — | — | — | 1,79,314.12 | |
| — | 15.00 | — | — | ||
| Supply of wall/piller mounted metallic sub distribution board with 01nos 100A MCCB breaking capacity 35KA, 4 Nos. 32 A TPN MCB, 4nos 32A SPMCB , busbar and neutral link arrangement etc. Make-Legrand | — | — | — | 2,91,733.2 | |
| — | 15.00 | — | — | ||
| Erection of wall/piller mounted metallic sub distribution board with 01nos 100A MCCB breaking capacity 35KA, 4 Nos. 32 A TPN MCB, 4nos 32A SPMCB , busbar and neutral link arrangement etc. | — | — | — | 5,694.45 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of L.T. Distribution Panel with incomer MCCB, four-pole, 400 Amp - 1 No and outgoing MCCB, four-pole, 250 Amp - 2 Nos, MCCB, four-pole, 100 Amp - 3 Nos, MCCB, four-pole, 63 Amp -3Nos and MCB TPN, 32 Amp - 6 Nos with multifunctional meter and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. | — | — | — | 2,38,374.18 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of L.T. Distribution Panel with incomer MCCB, four-pole, 630 Amp - 1 No and outgoing MCCB, four-pole, 400 Amp -4Nos, MCCB, four-pole, 250 Amp - 6 Nos and MCCB, four-pole 100 Amp - 4 Nos with multifunctional meter and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three- phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. | — | — | — | 2,63,430.46 | |
| — | 600.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required as per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 7.1.4. Above 185 sq. mm and upto 400 sq.mm | — | — | — | 2,84,400 | |
| — | 300.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required as per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 7.1.3. Above 95 sq. mm and upto 185 sq.mm | — | — | — | 1,26,600 | |
| — | 500.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 7.8.3. Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm Metre MS flat clamp) | — | — | — | 57,500 | |
| — | 1000.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 7.8.2. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm Metre MS flat clamp) | — | — | — | 92,000 | |
| — | 500.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 7.8.1. Upto 35 sq. mm (clamped with 1mm thick saddle) | — | — | — | 22,500 | |
| — | 500.00 | — | — | ||
| Supply and main wiring with cable of size 4 Core X 10 sq mm flexible copper wire in suitable PVC pipe.Surface wiring cable make Anchor/Finolex/ Polycab/ | — | — | — | 2,67,750 | |
| — | 30.00 | — | — | ||
| Termination of LT XLPE cables of various sizes (One Job means all 4 cores of cables) | — | — | — | 5,378.7 | |
| — | 2000.00 | — | — | ||
| Supply, Erection, Testing and commissioning of MS/PVC conduit pipe 25mm dia and 1.6mm thick, recessed in the wall and through the wall by making hole and replastering the same in original condition complete with Tee, elbow, junction box, sadle & Other accessories for sub main wiring | — | — | — | 1,04,760 | |
| — | 2000.00 | — | — | ||
| Supply, erection, Testing & Commissioning of sub main consisting of 2x4 Sq. mm (P & N) PVC insulated and sheathed copper wire multristanded single core 1.1KV grade alongwith 1.5 Sq. mm PVC insulated copper wire 1.1 KV grade for earthing. (Quantity 1 Mtr. Equal to 02 Nos., wire of 4 Sq.mm of 01 Mtr.each. and 01No. earth wire 1.5 Sq. mm. of 01 M) (No cable joint is permitted inside the MS conduit pipe cable should be jointed with cable connectors inside the switch board).Wire Make-Polycab/Havells/Phinolex | — | — | — | 1,63,080 | |
| — | 30.00 | — | — | ||
| Fabrication, supply and fixing & connection of IP 65 protected out door wall/pillar mounting thermoplastic polycarbonate plug and socket distribution board with provision for incomer 63A RCCB-100mA and out goings 63A 5 pin IP 67 socket and plug1no, 32Amps 3 pin IP 67 socket and plug-1no, Individual MCB control 63A, 4P MCB for three phase socket and two pole 32A MCB -2 nos for single phase socket , loop in loop out type suitable to 4C x 70 sqmm cable including termination and earth link for the incoming / out going as specification. | — | — | — | 9,98,663.7 | |
| — | 100.00 | — | — | ||
| Supply and wiring including termination for all type of light and fan points by 2 nos of 1.5 sqmm copper wire and 1 no of 1.5 sqmm copper wire in existing PVC pipe already laid with Modular type switches as per specification. - (a)Short point (of length upto 3 metres) - points.Make- Polycab/Havells/Phinolex | — | — | — | 22,540 | |
| — | 250.00 | — | — | ||
| Supply and wiring including termination for all type of light and fan points by 2 nos of 1.5 sqmm copper wire and 1 no of 1.5 sqmm copper wire in existing PVC pipe already laid with Modular type switches as per specification. - (a)medium point (of length above 3 metres and up to 5 metres) points.Make-Polycab/Havells/Phinolex | — | — | — | 73,047.5 | |
| — | 400.00 | — | — | ||
| Supply and wiring including termination for all type of light and fan points by 2 nos of 1.5 sqmm copper wire and 1 no of 1.5 sqmm copper wire in existing PVC pipe already laid with Modular type switches as per specification. - (a)long point (of length above 5 metres and up to 7 metres) points Make-Polycab/Havells/Phinolex | — | — | — | 1,65,296 | |
| — | 500.00 | — | — | ||
| Supply and wiring of 2 runs of 6 sq mm FRLS / HFFR insulated flexible copper cable for phase and neutral and one run of 6.0 sqmm copper cable for earthing through PVC pipe already laid.Make-Polycab/Havells/Phinolex | — | — | — | 1,03,305 | |
| — | 50.00 | — | — | ||
| Supply, fixing , testing & commissioning of modular type MCB 6 - 32 A / SP as per specification.Make-Legrand/Schneider | — | — | — | 7,878.5 | |
| — | 500.00 | — | — | ||
| Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.as per detail drawing approved by competent authority as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and CPWD DSR (E&M) 2022 Item No. 1.5.Make-Polycab/Havells/Phinolex | — | — | — | 2,16,500 | |
| — | 400.00 | — | — | ||
| Supply and wiring of 2 runs of 1.5 sq mm FRLS insulated flexible copper cable for phase and neutral and one run of 1.5 sqmm copper cable for earthing through PVC pipe already laid. | — | — | — | 23,376 | |
| — | 600.00 | — | — | ||
| Supply and wiring of 2 runs of 2.5 sq mm FRLS insulated flexible copper cable for phase and neutral and one run of 1.5 sqmm copper cable for earthing through PVC pipe already laid.Make-Polycab/Havells/Phinolex | — | — | — | 48,834 | |
| — | 50.00 | — | — | ||
| Supply & fixing/concealing of 8 module metal box with front plate like"LEGRAND arteor model "confirming to latest IS specification, in a concealed manner, as per the section in charge's instruction. | — | — | — | 31,300 | |
| — | 110.00 | — | — | ||
| Supply & fixing/concealing of 12 module metal box with front plate like"LEGRAND arteor model "confirming to latest IS specification in a concealed manner as per the section in charge's instruction. | — | — | — | 1,05,160 | |
| — | 160.00 | — | — | ||
| Supply & fixing/concealing of 4 module metal box with front plate like"LEGRAND arteor model "confirming to latest IS specification in a concealed manner as per the section in charge's instruction. | — | — | — | 68,800 | |
| — | 210.00 | — | — | ||
| Supply & fixing of 5/6A single pole modular switch with indication like"LEGRAND arteor model"confirming to latest IS specification in the modular box in an approved manner as per the section in charge's instruction. | — | — | — | 31,500 | |
| — | 220.00 | — | — | ||
| Supply & fixing of 5/6A 2 module plug socket like"LEGRAND arteor model "confirming to latest IS specification in the modular box in an approved manner as per the section in charge's instruction. | — | — | — | 44,660 | |
| — | 110.00 | — | — | ||
| Supply & fixing of 15/16 A modular plug socket like"LEGRAND arteor model "confirming to latest IS specification in the modular box in an approved manner as per the section in charge's instruction. | — | — | — | 24,860 | |
| — | 220.00 | — | — | ||
| Supply & fixing of single module 16A modular switch ike"LEGRAND arteor model "confirming to latest IS specification in the modular box in an approved manner as per the section in charge's instruction. | — | — | — | 38,500 | |
| — | 50.00 | — | — | ||
| Supply & fixing of 25A MCB protected plug socket with suitable DP MCB like "LEGRAND arteor model "confirming to latest IS specification in an approved manner as per the section in charge's instruction. | — | — | — | 68,200 | |
| — | 570.00 | — | — | ||
| Supply & fixing of 5/6A single pole modular switch like"LEGRAND arteor model "confirming to latest IS specification in the modular box in an approved manner as per the section in charge's instruction. | — | — | — | 62,130 | |
| — | 50.00 | — | — | ||
| Supply & fixing of 1 module modular blanking plate in the modular box | — | — | — | 2,350 | |
| — | 25.00 | — | — | ||
| SETC of Single phase, 12 way MCB DB with 1 no. of 63 A DP MCB as incomer & 10 nos. of 6 - 32 A SP MCBs as per IS, IE rule & site requirement. Make: Havells Usha, Orient, Bajaj or equivalent.Make-Legrand/Schneider | — | — | — | 1,27,101 | |
| — | 400.00 | — | — | ||
| Supply of ceiling rose, 3 plate conforming to IS:371-1999 & installation on the junction box of laid conduit including connections, testing & commissioning as per site requirement and as per tech. specification. | — | — | — | 6,256 | |
| — | 40.00 | — | — | ||
| Rate for supply of 20A ray roll plug & socket with MCB with all accessories. | — | — | — | 39,008.4 | |
| — | 40.00 | — | — | ||
| Rate for fixing of 20A ray roll plug & socket with MCB with all accessories | — | — | — | 3,625.6 | |
| — | 1000.00 | — | — | ||
| Providing G.I. perforated cable tray of size 200 mm x 100 mm x 100 mm on MS frame with cover - The price shall cover for fabrication, supply and fixing of M.S. perforated cable tr cable ay, hot dip galvanized as per latest ISS/BSS of size 200 x 100 x 100 mm and 2.0 mm approximate thickness with appropriate cover of thickness 1.6 mm. The cable tr cable ay shall be fixed horizontally or vertically at site and the existing LT cables shall be laid/shifted in the cable tray by disconnecting from the panel/switch end and reconnecting as per site requirement duly tied with suitable clamps with GI nuts, bolts and washers in a safe and secure manner. The fixing clamps shall be fabricated from 50 x 50 x 6 mm MS angle or 50 x 6 mm MS flat duly painted and fixed at approximate distance of 1.5 to 2.0 meter apart with 2" long dowel/fisher rack bolts. The tray shall be fabricated in lengths of 2.0 meter and couplers shall be provided at joints. The cable tr cable ay cover shall be fixed with GI screws. | — | — | — | 8,98,840 | |
| — | 20.00 | — | — | ||
| Supply, installation and commissioning of Maintenance free chemical earthing (pipe in pipe type) as per railway specification and railway scope of work. | — | — | — | 6,36,368.2 | |
| — | 200.00 | — | — | ||
| Supply and laying of GI flat of 40mmx6mm size for shed earthing. | — | — | — | 28,288 | |
| — | 10.00 | — | — | ||
| Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in PCC : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) 3 graded stone aggregate 20 mm nominal size derived from natural sources for foundation of panels,trench etc, all as specified and as directed. | — | — | — | 78,851.8 | |
| — | 10.00 | — | — | ||
| Material and labour for Centring and shuttering including strutting, propping etc. and removal of soil form work for foundations | — | — | — | 3,119.7 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022.pdf
ATTACHMENT
PublicProcurement_Dec2017.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Annexure-IFormat.pdf
ATTACHMENT
Annexure-IIFormat.pdf
ATTACHMENT
TenderformFirstsheet.pdf
ATTACHMENT
IndeminityBondFormat.pdf
ATTACHMENT
AllAdvanceCorrectionSlipuptodate.pdf Advance Correction Slip GCC 2022
ATTACHMENT
AnnexureXVIIInsuranceSuretyBond.pdf Annexure XVII Insurance Surety Bond
ATTACHMENT
Tenderdocumentdetails.pdf
ATTACHMENT
AllAdvanceCorrectionSlipuptodate.pdf
ATTACHMENT
AnnexureXVIIInsuranceSuretyBond.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .