REPAIRS AND REPLACEMENT OF REVOLVING CHAIRS, VISITOR CHAIRS, TABLES , SOFA CUSHIONS AND STEEL FURNITURE INCLUDING REPLACEMENT OF SEAT AND BACK OF CHAIR VARANDAH MAP, CHAIR CB STEEL ETC AND PAINTING TO ALL TYPE OF STEEL FURNITURE AT 11 BRD AT STATION

Amount

Table Office Clerk/Officer Steel (FD-1005) :- Taking out existing worn out front & side portion complete of the drawer. Supply & fix new front & side portion complete with lock to the drawer. Removing the dents and bents welding/riveting the damaged portion of the drawer and rectifying portion of the drawer and rectifying other defects to have smooth movement of the drawers all as specified and directed.

Table office officer steel (FD-1003) Taking out worn out following components without damaging the other components. Supply the new components made out of 25mm square 16 gauge MS Square tubing and fixing the same by welding to the in place of removed components :- Legs

Top rails short

Foot rest long stiffners

Top rails long

Taking out worn out following components without damaging the other components. Supply the new components made out of 25mm square 16 gauge MS Square tubing and fixing the same by welding to the Table office clerk steel in place of removed components :- FD-84, 1004, 1005 Legs

Top rails short

Stiffeners short

Top rails long

Foot rest long stiffners

Removing dents and bents and carrying out the minor repairs, repairs to locking device complete of the drawers to have smooth movement. Material and labour for preparation of steel surface of table providing high class glossy finish synthetic enamel paint over a coat of red oxide primer wherever required. including providing of PVC shoes to the legs:- Table office clerk steel

Table office officer steel

Removing of old damaged/unserviceable Table tops from table steel and replacing the top with 18 mm thick pre-laminated particleboard (one side teak face another white balancing coat) 6 mm thick teak wood beading all around and fixed with suitable size of screws to table frame as per drawing including polishing to teakwood edging all as specified and directed by Engineer-in- Charge Table office clerk steel FD-84, 1004, 1005

Table office officer steel FD-1003

Removing existing unserviceable old locks from table. Supply and fix new lock, made out of steel body Grade I type of 50mm size with six brass levers and with duplicate keys, all and fixed to the steel table with screw, complete all as specified and directed.Make:-godrej or equivailent

CHAIR CB STEEL WITH/WITHOUT ARMS 14(a) Taking out the old worn out and unserviceable portion of MS tubular frame of chairs as listed below. M&L for new portion/part duly fabricated to shape and size as shown on drawing to match/fit in the chair and made out of 25mm dia 16 gauge MS tubing. Welding the new fabricated portion/part to the chair frame all as specified and directedby Engineer-in- Charge . Complete all shape base portion of steel chair frame

Pair of L shape vertical base portion of steel chair frame

25 mm dia 16 gauge 460mm long on tubing support between the seat and back frame of each steel chair frame

50 x 25 x 3mm Mild Steel cleats with a hole to hole a screw, four cleats each, to seat and back frame of each steel chair frame to support wooden seat/back wooden frame all as specified and directed

Removing damaged unserviceable Seat frame from chair CB tubular steel with arm/without arm and back frame from chair CB steel with/without arm supply and fix new seat and back frame complete with suitable size of screw as specified all as per drawing and directed by Engr-in-Charge. Back frame for chair CB tubular steel with arm

Seat frame for chair CB tubular steel with arm

Arm rest for Chair CB steel with arm

Repairs to Almirah Large/ Medium Steel : FD-243, 1032, 67(M), 1031 Removing existing unserviceable old locks from Almirah steel. Supply and fix new lock, made out of steel body Grade I type of 75mm size with six brass levers (Make Aligarh or equivalent as approved by GE) and with duplicate keys, and fixed to the steel Almirah with four screw or as required, complete all as specified and directed

Removing existing unserviceable handle from steel Almirah. S & F new steel chromium plated handle of 150mm size all as per Godrej pattern and fixed to steel Almirah with hexagonal nut and steel pin of appropriate size complete all as specified and directed.

Taking out existing locking device carrying out all minor repairs, dent and bents to the Almirah Large/Med steel refixing the same to the steel Almirah with providing of new screw or nut and bolt all as specified and directed by Engr-in-Charge

Removing dents, bents of steel Almirah, welding to broken portion. Rectifying all minor defects and repairs. Material and labour for preparation of steel surface of Almirah (inside & outside surface) including doors shelves and legs. Providing high class glossy finish synthetic enamel paint over a coat of red oxide primer wherever required. All complete specified shown on drawing and directed for following Almirahs:- Almirah Large Steel with Shelves

Almirah Med Steel with Shelves

M&L for removing/scrapping old worn out paint from the following steel furniture by sand paper and painting with two coats of OG/ White/Black (wherever required) synthetic enamel paint make Asian/Berger over a coat of red oxide primer. Rest all as specified in the drg and as directed by Engr-in-Charge. Almirah Large Steel with shelves FD-109, 67 (M), 1031 & Almirah Large steee 1/2 H 1/2 S( FD-1033)

Shoe Rack Steel

Chair CB Steel with Arms FD-75

Almirah Med Steel with shelves FD-243, 1032

Table office officers steel FD-1003

Table office clerk steel FD-84, 1004, 1005

Rack Shelf with 4 Shelves

Locker Bed Side

Chair Verandah Steel Map (Black)

Teapoy Verandah

Teapoy Verandah Map

Chair School with Hand Board

CHAIR VARANDAH PVC (FD/E6/MAPII/06) :- Removing of PVC seat and S & F new PVC moulded seat and back white color to the existing frame of chair varandah after applying one coat of synthetic enamel paint white color for complete chair as specified and directed by Engineer-in-charge.

M&L for spot welding joints of frame of chair varandah Map as where required

Table Bed side Map :- Removing the unserviceable/worn out components without damaging the other components or structure of Table Bed Side Map, supply and fix new components given below. The new components shall be shown in drawings and also to match with the existing components. Leg

Drawer Complete

Prelaminated Particle board 18mm TH with PVC edging around for Top

Handle

Chair School with Hand Board : Removing the unserviceable/worn out components without damaging the other components or structure of Chair School, supply and fix new components given below. The new components shall be shown in drawings and also to match with the existing components. PVC Back & Seat

18mm TH Prelaminated Particle Hand Board

Chair Revolving Executive with Arm -Taking out unserviceable/worn out the following componets of the chair exectutive revolving high back, S&F new components as per existing shape and size to the chair color as approved or as directed by Engr-in-Charge:- (Note : After complete repair of components contractor has to assemble/ tightening all the assessories of chairs) Cushioned seat

Cushioned back

PV Handle

Bottom stand (PVC) with caster wheel

Hydraulic pump steel

MS Tilting MS Frame

Chair Computer without Arm - Taking out unserviceable/worn out the following componets of the chair computer, S&F new components as per existing shape and size to the chair color as approved or as directed by Engr-in-Charge Cushioned seat

Cushioned back

Bottom stand (PVC) with caster wheel

Hydraulic pump steel

MS Tilting MS Frame

Chair Visitor Cushioned/Chair Tubular Padded Seat & Back - Taking out unserviceable/worn out the following componets of the chair exectutive Vister S&F new components as per existing shape and size to the chair color as approved or as directed by Engr-in-Charge:- Cushioned seat

Cushioned back

PV Handle

Chair Revolving with Mid Back - Taking out unserviceable/worn out the following componets of the chair computer, S&F new components as per existing shape and size to the chair color as approved or as directed by Engr-in-Charge Cushioned seat

Cushioned back

PV Handle

Bottom stand (PVC) with caster wheel

Hydraulic pump steel

MS Tilting MS Frame

Removing of worn out foam cushion from seat of Chair Dining Cushioned and S & F new foam cushion to match with the existing shape and size and as shown on drawing. Tapestry cloth shall be superior quality as approved by GE or as directed by Engr-in-Charge. Chair Dining Cushioned (FD/Map-II/04)

Removing of worn out foam cushion and tapestry cloth from seat and back both of sofa set and S&F new foam cushion 100mm thick 40 density Make Jyoti / Pooja / Priya duly covered and stiched with superior quality of tapestry cloth as approved by having chain at one side as per existing shape and size as shown on drawing or directed by GE/ Engr-in-Charge :- Note : Contractor will be quote rate for each cushion only Sofa set 5 seater FD-258/ Sofa Chair single (10 Cushion in each Sofa 5 Seater)

Taking out the unserviceable components without damaging the serviceable components, supply and fix new components made of Teak wood as per drawing and also to match with the existing components including sanding, rubbing and polishing and applying one coat of French polish to new component or complete table after repairs all as specified and directed by Engr-in-Charge. Table 900x600mm w/o Drawer/ with Drawer (FD-223, 42, 55, 284,283) Leg

Top rail short

Top rail long

Stiffener

Side stiffener

Drawer complete

Table dining 6 persons Drg No- FD-30, 273 Leg

Top rail short

Top rail long

Table Centre FD-29, 235, 274 Leg

Long rail

Short Rail

Table Peg FD-25, 236, 277 Leg

Side rail

Teapoy FD-278 Leg

Long Rail

Short Rail

Table dining 8 Persons FD-30, 239, 273 Leg

Top rail short

Top rail long

Table Dining ORs with Alluminium Top - FD-165(M) - Removing of old damaged/unserviceable table top from table dining OR’s FD-165(M) and replacing top with 18mm thick particle board interior grade duly covered with aluminium sheet of 22 gauge and fixing with suitable size of screws to table frame including one coat of black synthetic enamel paint as specified all as per drawing and as directed by Engr-in-charge

Taking out worn out component as listed below removing dents/bents welding broken frame. Supply & fixing new component made out of 25mm 16 gauge square tubing to match & fit in place of worn out component of steel frame of Table Dining OR’s. Leg

Stiffener

Table Computer - Taking out unserviceable/worn out the following componets of the Table Computer , S&F new components as per existing shape and size to the table color as approved or as directed by Engr-in-Charge/ GE. S&F Table top 18mm thick Prelaminated particle board( one side teak face another white balancing coat)

S & F 14 inches Keyboard Channel

S & F 16 inches Drawer Channel

Removing of old damaged/unserviceable Table top from table and replacing the top with 18 mm thick pre-laminated particleboard (one side teak face another white balancing coat) 6 mm thick teak wood beading all around and fixed with suitable size of screws to table frame as per drawing including polishing to teakwood edging all as specified and directed by Engineer-in- Charge. Tables as under : Table 900 X 600mm with Drawer/ wihtout Drawer FD-284,283

Table Writing FD-249, 275

Table Dining 6 Persons FD-273

Table Dining 8 Persons FD-239,30

Table Dining 1200 X 900mm

Table 600 X 600mm FD-293

Table Centre FD-274

Table 900 X 900mm FD-291

Teapoy FD-278

Table Peg FD-277

Teapoy Verandah/ Teapoy Verandah Map

Imprint Digitech (BID ID -3341385)