Supply of Medical Stores to Base Hospital Lucknow

SUPPLY OF MEDICAL STORES

Sterile oscillating saw blade compatible with Zimmer surgical saw system (1.2-1.3 mm thickness x 20-25 mm width x 100-110 mm length), 10% variation in size acceptable

Disposable hair trimmer blades for surgical preparation (Rechargeable hand piece with charger to be supplied on loan by supplier on no cost basis with every 75 blades)

Fixed bearing unicompartmental knee replacement prosthesis including one femoral component, tibial component,articular insert and 20 gm packet of cement

Uncemented THR set consisting of Uncemented beaded porous coated acetabular cup with three screw holes 50mm, Highly crosslinked polyethylene liner (50/32 mm), uncemented femoral stem with lateral offset option, 12/14 taper and low profile lateral shoulder (Proximally circumferentially porous coated), Delta ceramic head (32mm), three acetabular screws

Uncemented THR set consisting of Uncemented beaded porous coated acetabular cup with three screw holes 52 mm, Highly crosslinked polyethylene liner (52/32 mm), uncemented femoral stem with lateral offset option, 12/14 taper and low profile lateral shoulder (Proximally circumferentially porous coated), Delta ceramic head (32mm), three acetabular screws

Uncemented THR set consisting of Uncemented beaded porous coated acetabular cup with three holes 58mm, Highly crosslinked polyethylene liner (58/36 mm), uncemented femoral stem with lateral offset option,12/14 taper and low profile lateral shoulder (Proximally circumferentially porous coated), Delta ceramic head (36 mm), three acetabular screws

Uncemented THR set consisting of Uncemented beaded porous coated acetabular cup with three screw holes 54 mm, Highly crosslinked polyethylene liner (54/32 mm), uncemented femoral stem with lateral offset option, 12/14 taper and low profile lateral shoulder (Proximally circumferentially porous coated), Delta ceramic head (32mm), three acetabular screws

Meniscal repair system with Trigger based positive deployment of 2 PEEK implants loaded with preknotted UHMWPE Braided suture with adjustible depth limiter for arthroscopic all inside meniscal repair profile-curved.

Ao Pattern cancellous screws 3.5mm dia, self ftapping. Lengths 10 to 70 mm. Material-Titanium

2.4/2.7 mm L OBLIQUE DORSAL DISTAL RADIUS LOCKING PLATE (variable angle) with 2 holes in distal horizontal part and 3-6 holes in longitudinal part with 4 x locking and 1 x cortical screw complete construct.

2.4/2.7 mm L SHAPED DORSAL DISTAL RADIUS LOCKING PLATE (variable angle) with 2 holes in distal horizontal part and 3-6 holes in longitudinal part with 4 x locking and 1 x cortical screw complete construct.

2.4/2.7 mm ' T ' SHAPED DORSAL DISTAL RADIUS LOCKING PLATE (variable angle) with 3 holes in distal horizontal part and 3-6 holes in longitudinal part with 4 x locking and 1 x cortical screws complete construct.

Wagner Stem Size 14/190

Wagner Stem Size 15/190

Wagner Stem Size 16/265

SYNTHETIC BONE GRAFT CUBES-sterile packed. USFDA and CE approved.

SYNTHETIC BONE GRAFT GRANUALS-sterile packed- 5 cc. USFDA and CE approved.

SYNTHETIC BONE GRAFT GRANUALS-sterile packed- 15 cc. USFDA and CE approved.

Uncemented Dual mobility acetabular cup with liner

Cemented Dual mobility acetabular cup with liner

Control cable with sleeve ,Cobalt Chrome 1.8 - 2.0 mm x 24 inches. ( compatible instrumentation to be provided at the time of surgery, Implant should have registry follow up data. USFDA approved / EU-CE certified)

Cemented Cruciate retaining fixed bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component - size B/2 (asymmetric deep trochlear groove, with variable radii for condyles, distal femoral pegs/lugs), titanium/cobalt chrome tibial component- size B/2 (Highly polished top surface), Ultracongruent deep dish highly crosslinked/compression moulded UHMWPE modular articular insert, polyethylene patellar component (round, three pegs), USFDA approved/registered with Bone cement with antibiotic and pigment/colour- Medium viscosity 40 gm packet

Cemented Cruciate retaining fixed bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component - size C/3 (asymmetric deep trochlear groove, with variable radii for condyles, distal femoral pegs/lugs), titanium/cobalt chrome tibial component- size C/3 (Highly polished top surface), Ultracongruent deep dish highly crosslinked/compression moulded UHMWPE modular articular insert, polyethylene patellar component (round, three pegs), USFDA approved/registered with Bone cement with antibiotic and pigment/colour- Medium viscosity 40 gm packet

Cemented Cruciate retaining fixed bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component - size D/4 (asymmetric deep trochlear groove, with variable radii for condyles, distal femoral pegs/lugs), titanium/cobalt chrome tibial component- size D/4 (Highly polished top surface), Ultracongruent deep dish highly crosslinked/compression moulded UHMWPE modular articular insert, polyethylene patellar component (round, three pegs), USFDA approved/registered with Bone cement with antibiotic and pigment/colour- Medium viscosity 40 gm packet

Cemented Cruciate retaining fixed bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component - size E/5 (asymmetric deep trochlear groove, with variable radii for condyles, distal femoral pegs/lugs), titanium/cobalt chrome tibial component- size E/5 (Highly polished top surface), Ultracongruent deep dish highly crosslinked/compression moulded UHMWPE modular articular insert, polyethylene patellar component (round, three pegs), USFDA approved/registered with Bone cement with antibiotic and pigment/colour- Medium viscosity 40 gm packet

Delta Ceramic femoral head 32 mm (size and neck length as needed intra op)

Delta Ceramic femoral head 36 mm (size and neck length as needed intra op)

Delta Ceramic femoral head 28 mm (size and neck length as needed intra op)

Short Proximal femoral nail 130/135°, 170/200/240 mm Cannulated, 11 mm dia with 1 x 8-9 mm hip screw and 1 x 6-7 mm derotation screw and 1 x 4.9mm locking bolts and end cap,Titanium- complete construct.

AO pattern LC-DCP plate 3.5mm,7 hole with 7 self tapping 3.5mm cortical screws complete construct . Material- 316Lvm stainless steel.Implant should be MRI safe.

2.7/3.5 mm Locking mid shaft/ distal(lateral) end clavicular locking plate FOR SUPERIOR PLACEMENT, left and right 5/6 holes with 5 locking and 2 cortical screws complete construct. Implants should be USFDA and CE certified, MRI safe.

3.5 mm LCP Clavicular hook plates (Titanium) for left and right side, 12/15/18mm hook depth,4 holes, 3 locking and 1 cortical screws complete construct.

LCP for proximal Medial tibia 3.5mm , 3 holes in the Head of the plate, 8/9 holes in the metaphysis/shaft, with compatible 6 locking head and 2 cortical screws complete construct.Implants should be USFDA and CE certified, MRI safe.

AO pattern 6.5mm cannulated Cancellous screw, 16 mm partially threaded , self-tapping, Length 35mm to 100mm with washer Titanium, should be MRI safe.

3.5 mm Clavicular shaft anatomical locking plates (for Superior placement) for left and right side 8/9 holes with 5 locking and 2 cortical screws complete construct. Implants should be USFDA and CE (European) certified, MRI safe.

LCP for proximal Medial tibia 3.5mm , 3 holes in the Head of the plate, 4/5 holes in the metaphysis/shaft, with compatible 4 locking head and 2 cortical screws complete construct.Sterile packing. Implants should be USFDA and CE certified, MRI safe.

Titanium elastc nails 2.5 to 4.5mm dia (Increments of 0.5MM).

LCP for proximal Medial tibia 3.5mm , 3 holes in the Head of the plate, 6/7 holes in the metaphysis/shaft, with compatible 5 locking head and 2 cortical screws complete construct. Sterile packing. Implants should be USFDA and CE certified, MRI safe.

Endobutton with adjustible length fiberwire/orthchord loop for ACL. It should have a leading thread and two fiberwire threads for adjusting the length during graft fixation. Implants should be USFDA and CE certified.

Cannulated Tibial Nails for fractures of proximal/distal third Tibia with 5 x 5 mm locking bolts, dia 9/9.5 mm. Length-280 to 400mm ( 15/20 mm imcrements) with 5/6 proximal locking options and 4 distal locking options with end cap, complete construct. Sterile packing. Implants should be USFDA and CE certified, MRI safe.Suprapatellar tibial nail.

End Cutter shaver blades for arthroscopoic shaver system. Implants should be USFDA / CE (European) certified, sterile packed disposable.Should be compatible with Smith nephew shaver system. Box of 6

diclofenac Diethylamine 4.64% w/v Equivalent to Diclofenac Sodium 4.00% w/v, Absolute Alcohol 10.00% v/v. Intopical solution base (Non Aqueous)q.s

Aggressive cutter shaver blades for arthroscopoic shaver system. Implants should be USFDA / CE (European) certified, sterile packed disposable.Should be compatible with Stryker shaver system. Box of 6

Long Proximal femoral nail 130/135o, Cannulated, 9 to 12mm dia,340 to 440mm length with1x8mm hip screw and 1 x 6.4 mm derotation screw and 2 x 4.9 mm locking bolls and ends cap, Titanium- complete construct. It should bne US FDA/CE/ICMED certified.

SMPL Life Sciences Pvt. Ltd.

BIO FAR MEDICAL SYSTEM

VISKHO HEALTHCARE PRIVATE LIMITED

PREM ENTERPRISES

AMENITY HEALTHCARE PRIVATE LIMITED

SIYARAMS CHEMIST

AHUJASONS SURGICALS

Euro Medi Tools Pvt. Ltd.

SHRI KRISHNA SURGICALS

Euro Medi Tools Pvt. Ltd.

SMPL Life Sciences Pvt. Ltd.

SHRI KRISHNA SURGICALS

AMENITY HEALTHCARE PRIVATE LIMITED

AHUJASONS SURGICALS

VISKHO HEALTHCARE PRIVATE LIMITED