Construction Testing Commissioning of various components of Lift Water Supply Scheme Bachloo Gujjar Basti under District Capex Budget

Amount

Earth work in excavation by Manual Means over areas (exceeding 30cm and up to 1.5 mtr in depth 1.5 mtr in width as well as 10 sqm on plan)including disposal of excavated earth upto 1 mtr from cutting edge disposed earth to be leveled and neatly dressed in . All kind of soil.

Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables etc. (Not exceeding 1.50 mts in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan depth upto 1.5 mtrs. ) including disposal of excavated earth upto 1 mtr from cutting edge disposedl earth to be leveled and neatly dressed in :-

All kinds of soil

Ordinary rock

Extra for every additional lift of 1.5 mtr or part thereof in: All kind of soil.

Laying and fitting of pipes excluding cost of pipes and earth work:-

80mm dia GI pipe

65mm dia GI pipe

50mm dia GI pipe

40mm dia GI pipe

25mm dia GI pipe

20mm dia GI pipe

Provision for P/F of pipe specials (if not supplied departmentally) to be paid as per actual

P/F of 10mm thick MS flanges incl. cost of flanges, cutting of threaded portions, bolts, nuts, washers etc. (80mm dia GI pipe)

P/F of 80mm dia sluice valve of reputed make and manufacture incl. all carriages complete

Providing/ laying stone soling hand packed including cost of stone

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level in 1:4:8 mix (1. Cement: 4coarse sand: 8 graded stone aggregate 40mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforce cement all work up-to plinth level in 1:1.5:3 mix (1 Cement:1.5 coarsesand:2graded stone aggregate 20mm nominal size.)

Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses plinth and string courses, fillets, columns , pillars piers, abutments, posts and struts etc, up to floor five level excluding cost of centering shuttering, finishing and reinforcement in 1:1.5:3 mix( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs, having stop upto 150 landing balconies shelves, chajjas, lintels, bands plain windows sills staircases and spiral stairs cases upto floor five level excluding the cost of centering, shuttering finishing and reinforcement with 1:2:4 mix (1 cent: 2 Coarse sand: 4 Graded stone aggregates 20mm nominal size.)

Reinforced cement concrete work in arches domes ,valults , shells, folded plate and roofs having slope more the 15o upto floor five level excluding the cost of centering shuttering ,finishing and reinforcement with 1:2:4 mix (1 cement 2 coarse sand ,4 graded stone aggregate 20 mm nominal size )

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforce cement all work up-to plinth level in 1:2:4 mix (1 Cement:2coarsesand:4graded stone aggregate 20mm nominal size.)

Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses plinth and string courses, fillets, columns , pillars piers, abutments, posts and struts etc, up to floor five level excluding cost of centering shuttering, finishing and reinforcement in 1:2:4 mix( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work up-to plinth level in 1:2:4 mix (1 Cement: t; 2 oarsesand:4 graded stone aggregate 20mm nominal size.)

Reinforcement for R.C.C Work including straightening, cutting, bending, placing in position and binding all complete. (thermo –mechanically treated bars)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufactures specification.

50mm thick Cement concete flooring 1:2:4 mix (1 cement; 2 coarse sand; 4 graded stone aggrgate) 20mm nominal size finished with floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc. complete.

Centering and shuttering including strutting ,propping etc and removal of form for :

Foundation, footing bases of columns etc .for mass concrete

Wall (any thickness) including attached pilasters, buttressed plinth and string courses etc.

Lintels, beams, plinth beams, griders, cantilivers etc.

Arches, domes, valuts upto 6m span

Suspended floor, roof, landing, balconies and access platform

Edges of slabs and breaks in floor and walls

Extra for shuttering in circular works:-

Foundation, footing bases of columns etc .for mass concrete

Wall (any thickness) including attached pilasters, buttressed plinth and string courses etc.

Lintels, beams, plinth beams, griders, cantilivers etc.

12mm cement plaster finishing with a floating coat of net cement of mix 1:3 mix. (1 cement: 3 fine sand.)

12mm cement plaster of mix 1:4 (1 cement:4 coarse sand)

Providing and fixing of MS lid and ladders to SR and Sump with all accessories and locking arrangement:-

MS Lid

MS Ladder

Structural steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Structural steel work in single section without connecting plate incl. cutting, hoisting, fixing and placing in position applying a priming coat of approved steel primer all complete

Providing and fixing GI chain-link fencing (fabric fencing ) of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts washer are required complete as per direction of engineer-in-charge (made of GI Wire of dia 4mm)

Painting with ready mixed synthetic enamel paints of approved brand and manufacture in all shade to give an even shade. New steel work (too or more coats)

Randum rubble masonary with hard stone from nallah in foundation and plinth including levelling up with cement concrete in 1:6:12 mix (1 cement; 6 coarse sand; 12 granded stone aggregates 20mm nominal size) at plinth level with 1:6 mix (1 cement; 6 coarse sand)

Dry randum rubble masonary with hard stone in foundation and plinth

Providing and laying damp proof coarse (DPC) 40mm thick with cement concrete 1:2:4 mix (1 cement; 2 coarse sand; 4 graded stone aggregate 12.5 mm nominal size crushed)

Pointing on stone work with cement mortor in 1:3 mix (1 cement; 3 fine sand)

Brick work common burnt clay (FPS) non modular bricks of class designation 75 in foundation and plinth in 1:6 mix (1 cement; 6 fine sand)

Extra for brick work in super structure above plinth level up to floor five level (by manual means)

Providing wood work in frames of doors, windows , clearstory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately (Sylvaita wood)

Providing/fixing glazzed shutters for doors, windows and cleastary windows using 10 Kg per Sqm (4mm thick) glass panes including black enamled ISI mard MS butt hinges with necessary screws (Salvatia wood)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and cleastary windows including iSI marked MS pressed butt hinges bright finished of required size with necessary screws excluding penelling which will be paid for separately all complete as per directions of Engineer

Providing and fixing penalling or penalling and glazzing in penalled or penalled and glazzed shutters for doors, windows and cleastoary windows (area of opening for pennal iinserts excel portion inside grooves or rebates to be measured) penalling for penalled and glazed shutters 25mm to 40mm

Providing and fixing 35mm thick wire guaze shutters using galvaized MS wire guaze of avergae width for apparture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and cleastary windows with hinges and necessary screws 2nd. Class kail wood

Providing and fixing of Ist class quality ceramic glazed tiles conmforming to IS:13753 of minimum thickness 5mm of approved make like NITCO; Orient; SOMANY; KAJARIA or equivalent make in all colours, shades except burgandy bottle greenblack of any size as approved 1:3 mix (1 cement; 3 coarse sand) and jointing with grey cement slurry @ 3.4 Kg per Sqm incl. pointing in white cement mixed with pigment

P/F of ceramic glazzed floor tiles 300x300mm thickness to be specified by the manufaturers of Ist. Quality conforming IS:13755 of NITCO; Orient: SOMANY: KAJARIA or equivalent make in colour such as white; grey; fume red 20mm thick of cement mortor 1:4 mix (1 cement; 4 coarse sand) including pointing the joints with white cement complete

P/F of water closet squating pan (India type WC pan) with 100mm sand cast iron P or S trap 10 Ltr. Low level PVC flushing cistern incl. flush pipe or approved make manually controlled device (hand lever) conforming IS: 7231 with all fittings and fixtures complete including cutting and making good the wall and floors (Orissa pattern white vetorious china WC pan size 580x440mm

P/F of slem stain less steel A ISI: 304 (18/8) kitcken sink as per IS 3983 with CA brackets and stainless steel plug 40mm incl. painting of fittings and brackets, cutting and making good the walls where ever required 610 x 510mm bowl depth 200mm

P/F of PVC waste pipe for sink or wash basin incl. PVC waste fitting complete

P/F of PVC sanitary fitting complete

P/F of corrugated GS sheet roofing incl. vertical curved surface fixed with polymer coated J or L hooks, bolts, nuts, washers 8mm dia mtr. With bitumen and GI limpet washer filled lead and incl. a coat of approved steel primer two or more coat of approved paint 0.50mm thick with zinc coating not less than 275gm/mtr sq.

Providjg ridges or hips od width 60cm over all width plain GS sheets fixed polymer coated J or L hooks, bolts, nuts, 8mm dia mtr. Limpet and bitumin washers complete

Providing and fixing of MS fabricated eves baording 300mm wise fabricated with 25x25x3mm angle backing over with 1mm thick MS sheet welded and coated with steel primer and two coats of synthetic enamel paint complete job

Supply and fixing of rolling shutter of approved make made of required size MS laths interlocked together through their entire length etc. complete with 80x90mm thick top cover complete job

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered walls surface to prepare the surface even and smooth complete

distampering with Ist quality acrylic distemper having VOC (Volatile Organic compound) content less than 50 grams per ltr. Of approved brand and manufacutre incl. applying additional coats where ever required to achieve even shade and colour (02 coats)

finishing walls with water proofing cement paint of required shade new work ( 02 or more coats)

Painting with synthetic enamel paint of approved brand and manufacutre of required colour to give an even shade (2 or more caots on new work) pver and under coat of suitable shade with ordinary paint of approved brand and manufacture:-

On wood work

On steel work

Provision for plumbing grills of windows, hardware items and electrification to the quarter (to be paid as per actual)

Filling available excavated earth (excluding rock )in trenches plinth sides of foundation etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50m and lift upto 1.5 m

Providing and filling of sand around PCC block incl. all carriages complete

Carriage of different materials from source upto dumping site of work by Mech. transport incl. cost of loading unloading complete:-

Cement, steel,. Structural steel avg. lead 20 Km

Pipe avg. lead 15 km

Sand avg. lead 35 km

20mm aggregate avg. lead 20 km

40mm aggregate avg. lead 20 km

Stone Soling avg. lead 10 km

Bricks average lead 25 Kms.

Quarry stones average lead 20 Kms.

Extra carriage of pipe by manual labor from damping site of work upto actual site of work avg. leads 500 mtr:-

Electro/Mechanical Works:- (Rates to be quoted by the bidder)

Supply, installation, testing and commissioning of open well type Submersible mono-set pumping units ( Horizontal type) as per technical specification mentioned in SBD.

Providing, Laying and fitting of flanged GI rising main which is to be laid underground ( Wherever possible) as per following specifications Nominal Dia : 80 mm Class of Pipe : B Pipe Ends : Flanged Flange Standard : Table – 5 Make : Prakash Surya / Jindal Average Trench size : 60 cm x 60 cm The job also includes loading, unloading of the material, fabrication work, welding of flanges, P/F of 5/8” x 3” bolts with nuts and rubber washers etc.

Providing and fitting of flanged G.I column pipes as per following specifications Nominal Dia : 65 mm or as per pump outlet Length of each pipe: 10 Rft Class of Pipe : B Pipe Ends : Flanged Flange Standard : Table – 5 Make : Prakash Surya / Jindal The job also includes loading, unloading of the material, fabrication work, welding of flanges, P/F of 5/8” x 3” bolts with nuts and rubber washers etc.

Providing, Fitting, Testing and Commissioning of Non Return Valve as per following specifications : Nominal Dia : 80mm Make : VAG/SIGMA FLOW Type : RETO – STOP Rating : PN 1.0 Body : Ductile iron Corrosion protection – Epoxy Coating The job includes P/F of suitable size by-pass arrangement complete with all fixtures etc.

Providing, Fitting, Testing and Commissioning of Sluice Valve as per following specifications Nominal Dia : 80 mm Make : VAG/ SIGMA FLOW Type : EKO PLUS Rating : PN 1.0 Body : Ductile iron Corrosion protection – Epoxy Coating

Providing and fitting of 900 , 80 mm dia. G.I. long radius bends made out of ( Class – B) GI pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joint.

Providing and fitting of 80 mm dia. off-sets made out of ( Class – B) G.I pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joint.

Fabrication/ Providing / Fitting of ( 80 x 80 x 80 ) mm TEE fabricated out of ( Class – B ) GI pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joints.

P/F of 10 sq. mm, submersible cable Havell’s/ L & T make for submersible pumping equipment from panel board to motor.

Fabrication / Providing / Fitting and testing of Modular control panel of appropriate size fabricated out of 16 SWG steel sheet having required openings / vents and fitted with accessories as mentioned in technical specification uploaded with SBD

Providing/Installation/Commissioning of fully automatic 20 HP star delta starters of mug series. The job cost of nuts, bolts, washers for fitting .The job includes minor auxiliary wirings i.e connecting of main incoming and outgoing connection leads duly crimped with copper thimbles and testing on full load at site. The starter shall be strictly as per technical specifications mentioned in SBD

Providing/Installation/Commissioning of 50 KVA voltage stabilizer as per ecifications mentioned in SBD

P/F of PRODIGY LT meter of following specifications c/w all fixtures required for fitment at site. Type: E3L100, 3Ph, 4Wire (KWh , kVArh, kVAh, kVA) 3x240(415)V, 50HZ Ref Temp: 270C 400 pulses/unit Ib:40A Imax 200A Battery : Lithium

Supply, installation, testing and commissioning of single phase HZ Submersible mono-set pumping units for spring source as per specifications mentioned in SBD

P/F of 7/16 PVC insulated copper wire of Havell’s / Finolex make for inter connections of electric gadgets.

P/F of copper thimbles of various sizes as per size requirement including crimping and taping.( 50 and 70 sq mm.)

Providing, fitting, testing and commissioning of XLPE Armoured Al. Cable of 1.1 KV grade conforming to IS: 7089 part 1st with following characteristics: Conductor Nominal area :50 mm2 Min. Number of wires 3 ½ Make : Havel’s/ /L&T

Providing and Fitting of 50 mm dia flexible canvas sleeve for carrying conductor.

Supply and erection of 9 mtr long hot dip galvanized octagonal pole ( Single Section ) with bottom 155 mm, top 65mm, thickness 3 mm with Zinc coating with inside arrangement for providing of power connection with following items: 04 No foundation bolts of required size and length with nuts Cement concreting of required size but not less than (50 x 50 x 100) cm in 1 : 2 : 4 ratio required length 1.5 sq mm multi strand PVC insulated copper conductor Service line from panel to pole in 2.5 sq mm multi strand PVC insulated copper conductor to be laid underground through alkathine sleeve – Length as per site requirement

Supply, Installation, Testing ang commissioning of pressure die cast aluminium integral LED flood lights as per specifications below : Make : Havell’s Rating – 48W Model : LHETAXU7PA6W048

Providing, Fabrication and fitting of suitable fixture capable of supporting 3 lights. It must be suitable for pole mounting and fabricated out of suitable size pipe.

Supply, Installation, Testing And Commissioning of Modular panel for outdoor duty of appropriate size fabricated out of 14 SWG sheet having required side louvers / vents for efficient heat dissipation having proper locking arrangement with following : 01 KW sine wave voltage stabilizer single phase 80 – 290 V input for a constant output of 240 V DP, MCB Legrand / reputed make required size enclosed in steel enclosure incl. cost of lugs cable gland etc. 32 Amp double pole MCB Legrand / L & T make 10 Amp MCB – 03 No’s L&T / Havell’s make The panel is to be supported on suitable size MS pipe, grouted properly and provided with a CC block of suitable dimensions

Supply and installation of 1050 VA Microtek/ Luminous / Exide made inverter for charging battery of DG set installed at water supply scheme. The job also includes supply of 12 V - 150 Ah Exide Xprss battery complete with leads, terminals and thimbles. The job includes all the charges on account of carriages, wiring and arrangement of skilled labour for installation of inverter. The job includes demonstration of the use of inverter and testing at site.

Electrification of Pump House as per technical specifications mentioned in SBD

Fabrication / Erection of channel iron column to act as support for monorail crane as per following specifications :- a) Vertical posts ISMC – 150 = 4.5 m x 2 x 2 = 18 m @ 16.4 Kg / m= 295.2 kg b) ISMC – 75 = 0.35 m x 20 x 2 = 14 m @ 6.9 kg / m =96.6 kg c) Plate -12 mm thick = 0. 5 x 0.3 x 8 = 0.9 m2 = 112.8 kg d) Monorail ISMB – 200 = 6 m @ 15.4 kg / m = 152.4 kg e) Nuts and Bolts assorted incl foundation bolts 6/8 “ x 2’ each = 10 kg Total wt. for one gantry = 667 kgs

Providing and laying of concrete blocks in 1:2:4 ( cement : sand : aggregate ) for grouting foundation bolts / matching / base plates. Each block shall be of ( 0.75 x 0.75 x 0.75 ) m size. The job includes all the charges on account of trench cutting, arrangement of material, skilled labour, form work, shuttering etc.

Supply, installation and testing of 03 ton capacity, manually operated chain pulley block of Indef make. The chain pulley block shall have 6 m lift. It shall also include suspension arrangement made of 10 mm steel wire rope or GI wire capable of supporting rated load.

The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia / Everest make and to be provided in convass bag of suitable size Flat Spanner of Size (4/5 to 30/32) (01 complete set) Ring Spanner Set of Size (12/13 to 30/32) (01 complete set) Cutting Pliers, 9 inch : (01 No`s) Nose Pliers 9 inch : (01 No`s) Screw Driver 12 inch / 9 Inch / 6 Inch/4 inch :( 01 No`s Each Size) Hammer, I Kg: (01 No each) Pipe Wrench 12 inch : (02 No’s )

Supply of facilities to the operational staff comprising of: a) Matting comprising of 12 mm thermo cool, jute matting/ excel, floor blankets – 200 sft each b) Bedding comprising of mattress, razai, excel blanket, pillow – 02 sets c) Cooking and bathroom items as 4 ltr pressure cooker, 2.8 ltr rice cooker, pan, aluminum cooking vessels – 02 No, steel plates – 04 No, Steel glass ( tumblers) – 04 No, cooking spoons – 02 No, Cups – 04 no, Plastic Jug, Electric heater, 20 ltr plastic buckets – 02 No, 1 ltr plastic mugs – 02 No, d) Chargeable lantern Andslite make – 01 No, e) Two Burner Gas stove with domestic gas cylinder – 14 kg capacity complete with gas pipe and regulator. f) Heat convector / Heating Blower – 02 No g) Plastic chairs of Samrudhi make (04 nos) and plastic table 01 No h) 6’x 4’ angle iron bed fabricated out of ISA50 and 19mm thick ply sheet. The height of bed shall be 2’. i) Uniform / track suit for operational staff of Marcopolo/ Tommy Hill Figer/NIKE/PUMA

Supply / Testing of Gas heater of Aygaz make for operational staff. The job is inclusive of the Aygaz heater complete with all fixtures, 14.2 kg filled gas cylinder, regulator , flexible pipe etc

Providing. Fabrication and fitting of MS holding clamps 2 feet long and fabricated out of 10 mm thick MS plate with flanges drilled with 6/8’’ dia holes as per site requirement.

Providing, Installation, Fitting, Testing and Commissioning of 15KVA Air Cooled D.G Set as per TECHNICAL SPECIFICATIONS mentioned in SBD

POL charges for one calendar year (6 ltr/ day ) including transportation, head loads etc. The HSD is to be supplied and dumped at site on fortnightly basis.

High quality electric Shock Proof Rubber sheets are to be provided near the electrical installation in the Pump House for safeguarding the operational staff from electric shocks during operation. The thickness of the sheet shall be 3 mm and shall be fixed with high quality adhesive. Make- Dunlop/ Jyoti).

P/F of fire fighting equipment of below mentioned specifications Type….. CO2 based Cap…….4.5 ltr Material…..Carbon steel Colour,…….Red Weight…….12.5 kgs Working Temp……………-10Deg to +55 Deg Cylinder Test Pressure………………….250 Bars Minimum Effective Discharge time……8 Sec

Reyaz Ahmad Dar

M/S SABEEL AHMAD MAGRAY