SPECIAL REPAIR TO TEN SHEDS TG 154 TO TG 162 AND TG 166 AT COD UNDER GE NORTH DELHI CANTT 10

Amount

Demolition of brick work built in cement or cement lime mortar complete.

M & L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition complete.

Demolition cement concrete (un reinforced) in ground floor and paving exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition cement concrete (un reinforced) in ground floor and paving exc 15 cm thickness (above ground level) all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness, inclusing Nainital or similar pattern roof coverings. (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge pieces. Complete all as specified and directed.

Taking down steel window/ ventilator shutters with glass pan of any description area n exc 1 sqm each from the existing frame. Complete all as specified and directed.

M&L for running welding in repairs thickness of metal exc 6mm but n exc 9mm to be welded. Complete all as specified and directed.

S&F in repair Mild steel screw bolts (machine made) with hexagonal or square heads (dia of neck 16 to 20 mm) at one end and screwed the other or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long. Complete all as specified and directed.

S&F in repair Mild steel screw bolts (machine made) with hexagonal or square heads (dia of neck 11 to 15 mm) at one end and screwed the other or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long. Complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard and dense soil all as specified and directed

S&F Plate girder or single stanchions, Fe 410-W(Gde-E-250 quality-A) built up of one beam or channel section with flange plates, caps bases splices, angle brackets cleats and other connections.

S&F Rolled mild steel sections (Fe 410-W (Gde-E-250) Quality-A) in framing for cladding, glazing, purline and the like fixed with angle cleats, and connecting plates in roof trush purline columns etc

S&F Pre-painted galvalume aluminum zink coating GI based corrugated /semi corrugated steel sheet 0.50mm thick, of any colour sheets as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws of required length and dia to fixed with MS steel framed structure (Trus/Rotter/Purline) of any thickness with using silicone and MS washers, roof at any slope, all as specified and directed by Engr-in-Charge. Make : TATA Blue Scope.

Pre-painted galvalume aluminum zink coating GI based plain steel sheet 0.50mm thick of any colour of sheet as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws of recquired length and dia to fixed with MS steel frame struture. (Truss/Rotter/Purline) at any thickness with using silicone and MS washers on roof/wall cladding etc as specified.

S&F Steel rolling shutters, thickness of laths in 1.25mm with out ball bearing, as specified including top cover, anchoring rod hasp and staple and one shop coat of primer erected in position as indicated gear operated type with bevel gear box and crank handle gear operated type with bevel gear box and crank handle complete.

S&F safety lever locks mild steel with 4 levers for rolling shutters. Complete all as specified and directed.

S&F ball bearing for rolling shutters. Complete all as specified and directed.

S&F powder coated aluminimum partition sections framed with single groove and double groove or plane hollow section, of approved size fixed to aluminimum section posts on concrete floor to hold 6.00mm thick glass pan, and ACP area of each pan as directed with rubber beading powder coated aluminium glazing cliping patti and all necessary consumable fitting and fixtures items. (Note - rate should be quoted including rubber beading and aluminimum beading/clilp/patti, but excluding glass pan and ACP). Complete all as specified and directed.

S&F 6.30 mm thick sheet glass pan ordinary quality and glazing with rubber beading and aluminium glazing clip/patti area exc 0.5 Sqm each pan. Complete all as specified and directed.

S&F Aludecor Designer Aluminium Composite Panel (ACP) 6mm thick any colour as approved fixed to aluminium fram with rubber beading/gaskit or aluminium glazing clip from both sides all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium (Minimum thicknes of powder coating 50 micron) for sliding doors & windows shutters including providing and fixing lock, hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z or G sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at tip, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth rust free straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples beads, tinned tacks to wooden doors shutters complete. Complete all as specified and directed.

S&F powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per reuirement and direction of Engineer-in-Charge.

S & F Roll Forming GI ECO 4000 series double shutter (glazed and gauzed) steel windows and ventilators with guard bars, fabricated from roll formed sections made galvanized steel colour coated/powder coated sections including 4mm thick plain glass in glazing for glazed shutter and stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete for gauzed shutters, including two coat of synthetic enamel paint over a coat of red oxide on steel surface , all fitting and fixtures all as specified (Drg as CEDZ TD No 289 )

Providing and fixing false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2% humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (part-4) -1970 and light Code Description unit rate No 429 Sub Head:26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams over sqm including boh sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross T of size 15x32 of length 1200mm and secondry intermediate cross T of size 15x32 of length 600 mm to form grid module of size 600x600mm suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall/ partition with the help of plastic rawl pluhs at 450mm centre to centre and 40mm long dry wall screws, The work shall be carried out as per specification drawing and as per direction of the Engineer-in-Charge.

M&L for plain cement concrete 50mm thick type B-1 1:2:4 (20mm graded stone aggregate) as prepration of surface and prepare the surface rough all as specified and directed.

M&L for machine cut mirror polish kota stone slab flooring 40-50 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achive mirror polish surface complete over 15mm thick screed bed in cement mortar 1:6 all as specifed and directed by Engr-in-Charge

Hard core of gauge n.exc 63mm deposited spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection including necessary form work and finishing the surface even and smooth with spike rolling to surfaces whilest the concrete is green with cut it to equal interval and fill with bitumen complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subase of floor, foundation filling and mass concreting, complete all as specified and directed.

M&L for 100mm thick plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) finished the surface smooth with using extra cement the surface with making impressions of expanded metal whilst the concrete is green all as specified and directed.

S&F with complete installation of wind operator turbo air ventilator of size 600mm dia made of steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height n exc 8.00 meter all as specified and directed by Engr-in-Charge

M&L for preparation of new steel untreated surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel (ordinary tint) over a coat of Red oxide zinc chrome all as specified and directed.

M&L for complete removal of existing treatment and preparation of steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint (ordinary tint).

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories surface on wall and fixing arrengements of sunken box by necessary welding on iron/ wall as required for switch piano flush type, 5 Amps, single pole, one way, 230 volts with switch frame including sunken box by necessary welding on iron rail/truss and grouting onwall complete all as specified and directed for light point controlled by one, one way switch 06 Amps.

All as per above item No 38 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch, complete all as specified and directed.

All as per above item No 38 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch, complete all as specified and directed.

All as per above item No 38 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F switch piano flush type, 06 Amps, single pole, one way, 250 volts complete

S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete

M&L for fixing arrengements of sunken box for switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame including sunken box by necessary welding on iron rail/ truss and grouting on wall complete all as specified & directed

S&F switch piano flush type, 16 Amps, single pole, one way, 250 volts complete

S&F socket outlet 2 in 1, 5 pin, 16 Amps, flush type, 230 volts with socket frame complete all as specified & directed.

Taking down of existing u/s highbay lights and Supply and fixing energy saving flood light 150 watts LED 5700K die-cast aluminium IP 66 flood light with high power LEDs as light source, comprising with electronic driver and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete all as directed

S&F energy saving security light fitting of 70 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and including 25 mm bore light grade G. I. tube mounting bracket suitable size in ‘L’ shape and fixed to shed by necessary welding work for fixing of GI pipe and 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers incl taking down old/ unsv fitting complete

S&F ultra modern recess mounting 36 Watts, 5700K, 2x2 LED flat panel complete with integrated electronic driver, soft-light and glare free symmetrical illumination, suitable for POP ceilings high brightness SMD LEDs, etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block incl taking down old/ unsv fitting complete

S&F wall mounting fan, 400mm sweep, RPM 2200, oscalating type incl connection and incl old/unsv fan to be deposited in E/M store yard complete all as directed

M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC conduit of 20 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring complete

All as as above item No 51 but for 02 x 1.5 Sqmm for phase & neutral and 01 x 1.5 Sqmm for continuous earth wire

S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and making good to the disturbed surfaces to match the existing complete

S&F MCB SP, AC, 240 volts of 6 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete

S&F MCB SPN, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point

M&L for sand cushioning for protection of cable with screen wash river sand complete

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete

M&L for GI tubing light grade with all necessary fittings laid fixed on wall/under floor including suitable clamps complete for size 40 mm bore

Supply, laying and connecting LT under ground electric cable of size 10 sqmm 2 core XLPE insulated and PVC sheathed armoured heavy duty multi stranded 1100 Volts grade with aluminium conductor, laid in trenches or drawn through pipe or fixed to wall with providing suitable size of aluminium lugs, GI nuts bolts and washers wherever required complete all as specified and directed

The new hut furnitures

A R construction

V M CONSTRUCTION

Simran construction Company