Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | ₹18.6 L | L1 | Accepted-AOC LOWEST AMOUNT ORIGINAL DATE OF WORK ORDER IS 5.08.2025 |
| 2 | L2₹19.6 LRejected-Finance | ₹19.6 L | L2 | Rejected-Finance NOT LOWEST AMOUNT |
| 3 | Rejected-Technical MU KOYALI BU PO NAVLI TA RISOD DIST WASHIM | RISOD | WASHIM | MAHARASHTRA | 444505 | - | - | Rejected-Technical bid capacity document not submitted on udin |
Tender Value
₹18.5 L
Closing Date
5 Jun 2025, 3:10 pmClosed
president KRUSHIBEEJ FARMER PRODUCER COMPANY LTD S
KRUSHIBEEJ FARMER PRODUCER COMPANY LTD SY NO 214 KANHERI SARAP TQ BARSHITAKLI DIST AKOLA
CONSTRUCTION OF FACTORY MACHINE SHED 102 SQ MT FOR KRUSHIBEEJ FARMER PRODUCER COMPANY LTD SY NO 214 KANHERI SARAP TQ BARSHITAKLI DIST AKOLA
2025_DOAWB_1182202_1
2025_DOAWB_civilkrushibeej
Open Tender
Civil Works
365 days
KRUSHIBEEJ fpc SY NO 214 KANHERI
As per tender document
2 documents required · 2 mandatory
₹590
Exempted
head diu smart akola
4 Jan 2026
22 May 2025
6 Jun 2025
22 May 2025
5 Jun 2025
22 May 2025
22 May 2025 - 29 May 2025
29 May 2025
Amount
PROPOSED CONSTRUCTION OF FACTORY MACHINE SHED 102 SQ. MT
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means (S.S.R I.No. 21.01)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading dewatering. preparing the as bed directed, for the foundation and necessary back filling, ramming. watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means (S.S.R I.No. 21.05)
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite quartzite gneiss metal for foundation and bedding including bailing oul water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) ete. complete. With fine aggregate (Crushed sand VSI Grade) (S.S.R I.No. 24.01)
Providing and laving in situ Ready Mix cement concrete M-20 of trap granite quartzite gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork. laying/pumping cover blocks. compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic mero processor based PLC with SCADA enabled reversible Drum Гурe mixer concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSI Grade) (S.S.R I.No. 25.11)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap granite quartzite gneiss metal for R.C.C. columns as per detailed designs and drawing or as including steel centering, formwork, directed cover blocks, laying pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (S.S.R I.No. 25.31)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering. laying pumping. formwork. cover compaction and roughening blocks. The surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR 1.No. 25.5)
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs. beams columns, canopies, staircase. newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs. drawings and schedules. including cutting, bending. hooking the bars, binding with wires or tack welding and supporting as required complete. (S.S.R I.No. 26.33)
Providing second class Burnt Brick masonry with conventional I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (S.S.R I.No. 27.01)
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering. formwork, cover blocks, laying/pumping, compacting curing finishing and roughening them if special finish IS 10 be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSL Grade) (S. S. R. I. No. 26.23)
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (S.S.R I.No. 21.37)
Providing soling using 80 mm size trap metal in 15 cm. layer including tilling voids with Crushed sand/grit. ramming. watering etc. complete. (S.S.R I.No. 21.4)
Providing second class Burnt Brick masonry with conventional I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (S.S.R I.No. 27.05)
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffoldingand fourteen days curing complete. (S.S.R L.No. 32.12)
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (S.S.R I.No. 32.03)
Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. (S.S.R I.No. 39.29)
Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (S.S.R I.No. 35.15)
Providing and applying washable oil-bound-distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat.)etc. complete. (S.S.R I.No. 36.1)
Providing and fabricating structural steel work in PEB Structure rolled sections. fixed with connecting plates or angle cleats in main and cross beam ship and jack rafters, purlins G.l connecting to truss members & the like, as per detailed design and diagram of as arected including cutting, fabricating. hoisting, erecting, fixing in position, making riveted bolted welded connections and one coat of anticorrosive paint and over it two coats of oil painting complete [Spec. No. Bd C.3 Page No 275 |
Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material IS manufactured out of nominal 0.45 mm Base Metal Thickness (BM1) (0.5 mm TCT ). Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zine alloy (55% aluminium 43.4% zine 1.6 silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigmem). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse cont on back surface. Profile sheet shall have nom. 950-1050 m effective cover width and nominal 25-30 min deep ribs with subtle square fluting in the five pan al nominal 180-250 mm center- to-center. The end rib shall be designed for anu-capillary groove, and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated. Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) (S.S.R 1.No. 38.34)
Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. (S.S.R I.No. 33.3)
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides. deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) (S.S.R L.No. 39.25)
PROVIDING AND FIXING OF TURBO VENTILATOR OF 24 MESH THROAT DIAMETER OF ALLUMINIUM AND OF APPROVED MAKE INCLUDING FIXING ON DOME MANUFACTURED FROM SAME MATERIAL USED FOR ROOFING ALL NECESSARY FEETINGS ETC. COMPETE (PRIOR APPROVAL OF SAMPLE AND BRAND BY ENGINEER INCHARGE IS NECESSARY BEFORE USE)AS DIRECTED BY ENGINEER IN CHARGE
ELECTRIFICATION
SUPPLYING AND CREATING ARMOURED CABLES 3 CORE 6 SQ.MM IN TRENCHWALL
SUPPLYING AND CREATING ARMOURED CABLES 3 CORE 10 SQ.MM IN TRENCHWALL
MAKING THE TRENCH IN SOIL
MAKING THE TRENCH IN MURUM AND HARD ROCK
SUPPLYING AND LAYING 75 MM DIA.G.I. PIPE (B) GRADE
SUPPLYING AND LAYING 25 MM DIA.G.I. PIPE (A) GRADE
SUPPLYING, ERECTING HEAVY DUTY FLENGE CABLE GLANDED 2 TO 4 2.5 SQ. MM 2 TO 4 CORE 4 SQ.MM.
P POINT LINING FOR STREET LIGHT 3 CORE 1.5 SQ. MM.
SUPPLYING AND CREATING WATER PROOF COATED DISTRIBUTION BOARD 4 WAY 2 X 6 AMPLERE S P MCB
S & E WITH MAINS PVC UNARMOURED CABLE 3 CORE 2.5 SQ.MM
SUPPLYING AND ERECTING AND MARKETING MCB OF DOUBLED POLE 0.16 AMP
SUPPLYING SHOCKPROOF TYPE HAND LAMP
SUPPLYING AND CREATING LED STREET LIGHT FITTING SUITABLE FOR 20 TO 25 W INCLUDING STREET LIGHT
SUPPLYING AND CREATING GI EARTH PLATE
S & E SHEET METAL ONE WAY ENCLOSE FOR MCB
POINT WIRING FOR LIGHT BELLS WITH 2 TO 1.5 SQ. MM PVC INSULATED WIRE
POINT WIRING WITH 2 TO 1.5 SQMM PVC INSULATED WIRE
POINT WIRING FOR INDEPENDENT PLUG WITH 2 TO 1.5 SQ.MM PVC INSULATED WIRE
POINT WIRING WITH 2 TO 1.5 SQMM PVC INSULATED WIRE
S & F CFL LAMP 11 W
SUPPLYING AND CREATING MARINE PLYWOOD 19 MM
P & F MS BOXES OF 16 SWG
S& E CEILING FAN 48" WITH STEP DIAMETER
SUPPLYING AND CREATING FOUR POLE INSULATOR ONLY WITH VERSIN OF MCB OF 40 AMP
S & E 40 MM DIAMETER G.I. PIPE 2.5 MM LENGTH OF EARTH PLATE
P & F COVER MADE OF WIRE MESH JALI
S & E DING DONG TYPE CALL BELL
S & E 4" x 4" E POXY COATED 3 JINNETION BOX
S & E STEEL TABULAR SWAGED POLE 139.7 X 114.3 X 88.9 MM DIA.
ROYALTY CHARGES
FOR SAND
FOR ALL OTHER MINERALS
QUALITY CONTROL & LAB TESTING
CONCRETE - COMPREHENSIVE STRENGTH OF C C CUBLES M 10 (SET OF 3 CUBES)
CONCRETE - COMPREHENSIVE STRENGTH OF C C CUBLES M 20 (SET OF 3 CUBES)
BRICKS WATER ABSORPTION (SET OF 5 BRICKS) COMPRESSIVE STRENGTH (SET OF 5 BRICKS) EFFLORESCENCE (SET OF 5 BRICKS)
STEEL BAR TESTING UPTO 16 MM (SET OF 3 BARS)
STANDARD CONSISTENCY , FINENESS , SPECIFIC GRAVITY, SETTING TIME (INITIAL & FINAL) COMPRESSIVE STRENGTH , SOUNDNESS
COMPACTION TEST (PROCTOR DENSITY)
MURUM PLASTICITY INDEX
SWAPNIL YADAVRAO DANDADE (BID ID -6698351)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid