ESTIMATE FOR PROVIDING NEW GATE AND GEARING SYSTEM AND REMODELLING OF CANAL REGULATING STRUCTURES AT RD 81398 OF MUKANDPUR DISTRIBUTORY.

Amount

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing Chequred Plate 6,8mm thickness of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing GI Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providingof hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 75*12mm.

Providing and Fixing Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (i) upto 1.5 ton Capacity.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Commissoning and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Dismantling brick work tile, masonry or tile in cement

Stripping and stacking slate or tiles of a roof.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excauated surplus soil in ordinary soil

Cement concrete 1:3:6 with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in sub-structure complete as per Drawing and Technical Specifications (height upto 5m)

Nicking cement concrete surface (over 28days old including preparation and layingslurry

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code 15658(2006) Cement based water Soluable exterior

Finishing walls with cement based water soliable exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Providing and fixing G.I. Sheet 0.80mm thick garage doors, with 40mm x 40mm x6mm angle iron frame with diagonal braces, 3.15mm thick gusset plates at the top and 25mm dia meter pulleys and T-iron 50mm x 50mm x 6mm guides at bottom including locking arrangement with handles and pintles, etc. complete in all respect.

Removing doors and windows together with the dismantling of walls( doors)

Removing doors and windows together with the dismantling of walls( windows)

Fixing steel window in walls with lugs, embedded in 15cmx12cmx7.5cm of cement concrete block of 1:2:4 mix including cost of cement concrete for lugs.

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing

Any Other Item

THE NEW GONIANA CO-OP L & C SOCIETY LTD