Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.9 L+₹1.1 L (5.77%)Rejected-Finance | L2 | Rejected-Finance Higher Bidder | |
| 3 | L3₹22.4 L+₹3.6 L (19.3%)Rejected-Finance LABU RAM STREET KOTKAPURA PB 151204 | KOTKAPURA | FARIDKOT | PUNJAB | 151204 | L3 | Rejected-Finance Higher Bidder | |
| 4 | L4₹23.5 L+₹4.7 L (24.9%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L4 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
22 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt
CWE/FZR-48/2023-24 PROVN OF 01X INTEGRATED GUARD ROOM AT RP GATE WITH LIVING AND TOILET FACILITY AT GROUND FLOOR AND SENTRY POST IN FIRST FLOOR AT JAT REGT UNDER GE (WEST) FEROZEPUR CANTT
2024_MES_639130_1
CWE/FZR-48/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(West) Ferozepur Cantt
₹48,000
Yes
3 Apr 2024
25 Jan 2024
1 Mar 2024
25 Jan 2024
22 Feb 2024
9 Feb 2024
Amount
Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and as directed by Engineer-in-Charge.
Treating the backfill in contact with foundation @ 7.5 litres of emulsion / Sqm of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and as directed by Engineer-in-Charge.
Treating the soil under plinth protection @ 5 litres of emulsion / Sqm of surface area complete all as specified and as directed by Engineer-in-Charge.
Treating the soil along with external perimeter of building @ 2.25 litre of emulsion / m of the perimeter wall complete all as specified and as directed by Engineer-in-Charge.
Material and labour Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to sides of footings of concrete foundation with rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to staircases with sloping or stepped soffits including risers & stringers (excluding landing). Rough finished surfaces of concrete flat complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Square, rectangular or polygonal etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to chajja and similar items including edges including supports, , etc. with rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Chajjas complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-Charge.
Material and labour Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engineer-in-Charge.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by Engineer-in-Charge.
Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge.
Material and labour Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed by Engineer-in-Charge.
Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:3) complete all as specified and as directed by Engineer-in-Charge.
Material and labour rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour rendering/plastering, 10mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.
Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with Single rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and as directed by Engineer-in-Charge.
Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.
Supply and fixing Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and as directed by Engineer-in-Charge.
3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing glavanised mild steel wire cloth 0.56 nominal dial of wire and average width of aperature and fixed with finned tack or galvanised staple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT butt hinges 100 mm long complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT Tower bolt 150 mm long complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and as directed by Engineer-in-Charge.
Pressed steel frames made of 1.25mm thick MS sheet of profile 75x50mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing alluminium anodised handles 100 mm long fixed to Cupboard etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed by Engineer-in-Charge.
Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and as directed by Engineer-in-Charge.
Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required complete all as specified and as directed by Engineer-in-Charge.
Material and labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge.
Material and labour 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge.
Material and labour Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed by Engineer-in-Charge.
Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed by Engineer-in-Charge.
Material and labour Non skid ceramic coloured (colour & shade as approved) tiles of size 300x300x7mm thick as in floor set andjointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic coloured (colour & shade as approved) tiles of size 300x450x7mm thick on vertical surface set and jointed in neat cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tile complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,complete all as specified and as directed by Engineer-in-Charge.
Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including angle iron/cast iron brackets of required size as directed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for vitreous china squatting pan of pattern “Orissa Pattern” size 580 mm x 440 mm white with ‘P’ or ‘S’ trap, front or back inlet any pattern including provision of lime concrete bedding etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified and as directed by Engineer-in-Charge.
All as per item 67 but size 75mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing cast iron Nahani trap 100 mm dia with gratting including jointing to waste pipe fixed with concrete cement in (1:2:4) type B1 using 20 mm graded stone aggregate etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Cast iron floor trap of 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing High density polythelne pipe of 50 mm bore dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing waste coupling of bore dia 32 mm of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing waste coupling of bore dia 32 mm of PTMT but suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC waste pipe, 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Stop/Angle Valve 15mm bore fancy type CP, Screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipeor union complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed
Supply and fixing 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and as directed by Engineer-in-Charge.
Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and as directed by Engineer-in-Charge.
Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered surfaces and applying two coats of cement base paint over a coat chalk white primer complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered surfaces wall and applying two coats of Oil bound distember complete all as specified and as directed by Engineer-in-Charge.
White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.
Supply and fixing Cement concrete tiles 20cm x 20cm x20mm thick, with grey cement & no pigment machine pressed; set, jointed & pointed in neat cement slurry in floors, & cut & polished over 15mm thick screed in CM(1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for two coat of aluminium paint over APP membrane complete all as specified and as directed by Engineer-in-Charge.
Material and labour for excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for fdn n. exc 10 sqm on plain and n. exc 1.5m in depth and getting out soft/loose solil complete all as specified and as directed by Engineer-in-Charge.
Material and labour 150m dia SGSW drain pipes laid in trenches and jointed complete all as specified and as directed by Engineer-in-Charge.
Material and labour PCC 1:3:6 type D-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work with sub class `B' bricks, straight or curved on plain exc 6 mm mean radius, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cement Concrete 1:4:8 type D-2 40mm graded stone aggregate as in sub base of foundating tiling and mass concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing precast cement concrete type B-1,1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete type B-2, 1:2:4 in coping of main hole complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces (finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for removing excavated soil n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.
Material and labour for returning, filling in inluding spreading, levelling, watering and well ramming in layers n. exc 25cm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for mild steel TMT bar 8 mm dia, cut to length, bent to shape required includidng cranking, bending for hooping complete all as specified and as directed by Engineer-in-Charge.
Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc complete all as specified and as directed by Engineer-in-Charge.
Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 50 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified and as directed by Engineer-in-Charge.
Hardcore of Broken broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 25 mm thik Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
Machine pressed precast conctete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade. complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use and waste of formwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for pre-cast cement concrete block 1:2:4 type B1 using 20 mm graded aggregate in cement mortar 1:6 including necessary earth work as in kerb stone complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new concrete surfaces and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer coat as in kerbs stones and all other similar works as per approved patteren complete all as specified and as directed by Engineer-in-Charge.
Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the One light/fan/Bell Point controlled by one single pole one way switch.
Ditto all as per Item No 113 above but for One socket outlet on the same board controlled by one single pole one way switch
Ditto all as per Item No 113 above but for One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.
Ditto all as per Item No 113 above but for one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing ceiling rose, PVC/Polycarbonate,isolated three terminals.
Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series complete all as specified.
Supply & Fix sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and as directed by Engineer-in-Charge. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
Material and labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and as directed by Engineer-in-Charge. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)
Supply and laying galvanised mild steel tubing medium grade 40 mm bore with all fittings, laid in trenches, in floor/under road on wall complete all as specified and as directed by Engineer in Charge.
Ditto all as per Item No 131 above but 20 mm dia complete all as specified and as directed by Engineer in Charge.
Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40 mm dia and fixed complete all as specified and as directed by Engineer in Charge.
Cutting existing CI/GI pipe 20/40/50/80 mm bore including run lead joints of suitable size with necessary fittings complete all as specified and as directed by Engineer in Charge.
Supply,alying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor,1100 vlots grade,cross sectional area 16 sqmm 4 core complete all as specified and as directed by Engineer in Charge.
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)
Supply and fixing Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc complete all as specified and as directed by Engineer in Charge..
Supply and laying for Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured complete all as specified and as directed by Engineer In Charge.
Material and labour for bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks,sub class 'B' designation 75 laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed by Engineer In Charge.
M/S KRISHNA ENTERPRISES
M/s Harkesh Kumar Bansal
M/s Sarup Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .