ETS No 34/25-26 of SE GCC Cbe

Amount

Supply of Rolled Steel ISMB as per latest issue of IS 2062 grade A, and latest issue from the approved vendors of TanTransco. RSJ 250x125 mm

Supply of Rolled Steel ISMB as per latest issue of IS 2062 grade A, and from the approved vendors of TanTransco RSJ 200x100 mm

Supply of M S Channel ISMC as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Channel 125x65 mm

Supply of M S Channel ISMC as perlatest issue of IS 2062 grade A, and from the latest issue of approved vendors of TanTransco MS Channel 100x50 mm

Supply of M S angle ISA as per latest issue of IS 2062 grade A, and from the latest issue of approved vendors of TanTransco MS Angle 100x100x8 mm

Supply of MS Angle ISA as perlatest issue of BIS 2062 grade A, and from the latest issue of approved vendors from TanTransco MS Angle75 x75x8mm

Supply of M S angle ISA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Angle 65 x65x6mm

Supply of M S angle ISA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTranscoMS Angle 50 x50x6mm

Supply of iron and MS steel as per latest IS 2062 AS PER tantransco approved vendors MS plate size 10 mm thickness

Supply of iron and MS steel as per latest IS 2062 AS PER tantransco approved vendors MS Chequered plate 6mm thickness

Supply of iron and MS steel as per latest IS 2062 AS PER tantransco approved vendors MS flat 65x10 mm

Supply of iron and MS steel as per latest IS 2062 AS PER tantransco approved vendors MS flat 50x8 mm

Supply of iron and MS steel as per latest IS 2062 AS PER tantransco approved vendors MS flat 25x3 mm

Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts,MS Angle, Bolt , Nut with washer (40mm Dia, 3m length)

Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. including cost of materials for earth electrode using M.S.rod 40 mm dia ,MS Angle , red soil and bentonite powder of 20 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG,GI Bolt & Nut as directed by the field Engineer

Supply of eye bolt of 18 - 20 mm dia GI rod of required length including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer.

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Supply of LC/key Board of size 4X3feet out of 75X25mm Alu. Frame embeded with 12mm pre laminated wood particle board using screw on rear 2Nos plain glass of 5mm thick fixed with metal roller moving on Alu.channel shoule be provided on front with locking arrrangements.LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer including cost of all materials

Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer 40mm dia

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Tension fitting Clamp 6 Bolted for Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Switchend clamp for Single Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Switchend clamp for 3"Busbar

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. T Clamp for Zebra to Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. T Clamp for 3" Bus to Single Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Free end clamp for 3"Busbar

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Seating clamp for 3"Busbar

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Reducer clamp for 3"Bus to Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. 3"Busbar jointing clamp

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. 3"Busbar Expansion clamp

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. PG Clamp for Zebra

Supply of the Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Corana Bell 75mm

Supply of reputed make long shackle 6 lever lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply of flexible copper tape/rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer

Supply of ISI mark cable glands as directed by the field Engineer. 19/22mm

Supply of ISI mark cable glands as directed by the field Engineer. 25mm

Supply of ISI mark cable glands as directed by the field Engineer. 28mm

Supply of lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination

Supply of ISI mark bakelite HRC fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. 16Amps

Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer 2/5/10/16Amps

Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer Netural link

Supply of ISI make MCB in panels/ Boxes of reputed make as directed by the field Engineer 1Pole 16Amps

Supply of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer.

Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required & as directed by the field Engineer

Supply of Rubber Mat of size 2000X1000X10mm

Supply of yard light Stepped tubular pole 8m Length Single Bracket pole with base plate(400X400X10mm)114.30mm OD,X5.40mm thick,4500mm Length,88.90OD X4.85mm Thick,1750mm length,76.10mm OD x 3.25mm thick,1750mm Length including cost of LED light,double pole MCB junction box fittings and painting in complete shape as per direction of field engineer.

Supply of Paint including cost of paint, brush and consumables etc.,a)Red Oxide paint

Supply of Paint including cost of paint, brush and consumables etc., b)Aluminium Paint

Supply of Paint including cost of paint, brush and consumables etc., c)Enamel Paint

Supply of PVC Stickers for Breakers, Panels, chargers and General key Boards as required and as directed by field Engineer,

Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer. Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above)

Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer. Light section with joints wherever necessary (sectional weight below 14Kg/Mtr)

Fabrication and fixing of bell mouth ,insertion of Jumper in the solid core/ PT Isulators and other consumables & as directed by the field Engineer

Labour charges for Dismantling of structures as per the drawing issued by field engineer. Heavy section (sectional weight 14Kg/m and above)Under LC

Labour charges for erection of structure as per the drawing issued by field engineer. Heavy section (sectional weight 14Kg/m and above)

Labour charges for dismantling of structure as per the drawing issued by field engineer. Light section (sectional weight below 14Kg/m)

Labour charges for erection of structure as per the drawing issued by field engineer. Light section (sectional weight below 14Kg/m)under LC work

Labour for hot dip galvanising mild steel materials wherever necessary as directed by the field Engineer

Labour charges for erection of LC/Key Board by the field Engineer including cost of all materials

Labour for erection of CT/PT junction box ,AC distribution box, yard light box ,change over switch including fabrication of clamping arrangements with provision of hardwares,etc.

Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer

Fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer

Labour for dismantling of single / double pole stack up right, under hang or suspension. with provision of hardwares,etc. 110KV under LC Work

Labour for erection of single / double pole stack up right, under hang or suspension. with provision of hardwares,etc. 110KV

Labour charges for Dismantling of strung bus including dismantling of insulator and dismantling of eye bolt and hardware fittings 110KV Single Zebra conductor (1 span 3 run) under LC work

Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110KV Single Zebra conductor (1 span 3 run) under LC work

Labour for dismantling of bus bar Without making bends. Using 75mm IPS Aluminium tube under LC work))

Labour for erection of bus bar Without making bends. Using 75mm IPS Aluminium tube

Labour for dismantling of Droppers and jumpers Upto height of 6mts from ground level

Labour for providing Droppers and jumpers Upto height of 6mts from ground level

Labour for dismantling of Droppers and jumpers Upto height of 6mts to 10mts from ground level

Labour for providing Droppers and jumpers Upto height of 6mts to 10mts from ground level

Labour charges for Gas cutting of M.S.Chequered plate 6mm thick.

Labour for erection using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tackles etc., as per standard 110KV SF6 Circuit Breaker

Erection of auxiliaries equipment Labour for erection using crane with provision of hardwares,etc. 110KV CT,PT,NCT,reactor (one Single.Ph.unit)

Labour for erection of Isolator / AB Switches, including erection of insulators, alignment works with provision of hardwares,etc. without earth hand operated 110KV

Labour for erection of Isolator / AB Switches, including erection of insulators, alignment works with provision of hardwares,etc. without earth hand operated 110KV on higher elevation structure above 6mtr including gear arrangement

Labour for assembling of panel/ battery charger, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares. Simplex indoor / Out door

Labour machineries, consumables for erection of earth mat

Labour machineries, consumables for earth raisers for equipments and structures

Labour machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit

Labour for Providing earth pit of 115 mm dia to a depth of 6 mtrs including fabrication of earth electrode using M.S.rod 40 mm dia, MS Angle & insert electrode in to the bore and refilling with red soil and bentonite powder of 20 Kg and Cement Collars and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod with suitable bolt to be fixed in the board and anti corrocive black paint should be painted top of the earth rod & its holding portion as directed by the field Engineer

Labour for excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Normal Soil )

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Upto 8Core

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Above 8core

Labour for laying of cable & clamping in structure Upto 8Core

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 19mm/22mm

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 25mm

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 28mm

Labour Charges for cable core end termination

Fixing of all types of MCB, fuse holder and fuse of all range wherever required as directed by the field Engineer.

Fixing of terminal block /disconnected type terminal block as required and directed by the field Engineer

Dismantling of Single Fitting LED Pole 6 & 8mts

Erection of Single Fitting LED Pole 6& 8mts and laying of cable inside the pole including testing for burning condition.

Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc., One primary coat of Red oxide painting of various structures.

Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc., Two coat of Aluminium paint of various structures.

One coat enamal painting/Anti corrasive Painting of Chequrred plates, Equipment board, indentification of earth pit board and yard light pole, structure earthing, earth mat, earth pit, shoe paint and Iron and steel items as directed by the field engineer.

Labour charges for writing details in Finished Surface boards including cost of enamel paint (Dulex, Asian, Berger preferred) and other Consumables as directed by the field Engineer.

Fixing of PVC Stickers for Breakers, Panels, chargers and General key Boards and other works etc., as required and directed by field Engineer,

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110 KV Isolators (Non Fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. Cables/Conductors including cutting and rewinding (Non Fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. Busbars (Non Fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for two operation. 110 KV Breaker ( Fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 230/110 KV CT/PT/LAS/CVT/ CC/ WT/Others (fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110 KV Insulators (fragile)

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 11 KV Disc Insulators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type

Transporting of Sub Station Equipments/Panels/Insulators etc., from Karamadai GCC Central Store to 110/33-11KV Kalapatty AIS(25KM)

Transporting of Iron and Steel Items from Thudiyalur to 110/33-11KV Kalapatty AIS(15KM)

Providing Labour for miscellaneous works such as removing jumper & reerection after testing, cable cover slab removing and relayiing.

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only