SPECIAL REPAIR OF ROAD FROM GATE NO. 03 TO GATE NO. 13 AT VARANASI UNDER GE (EAST) PRAYAGRAJ.

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per 10 Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. Note : (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for premix bituminous macadam laid, rolled and compacted to required gradient and camber using binder (paving bitumen VG-30) grade with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.

M&L for applying thermo plastic reflective paint as in road marking of minimum 2.5mm thickness , single coat as in marking of 100/150mm with using Hot mark thermoplastic paint (Hot application) white / yellow by indegenous modern , propelled road marking machine as directed incl all ingredient such as binder glass bead etc, complete all as specified and directed.

S&F Solar stud /Cat eye of size 135mmx105mmx26mm leg 50mm of Aluminium body with a large solar panel , battery 12V/800mAh acrylic reflector and Aluminium frame with Mix Epoxy filler including fixing arrangement as per manufacturer instruction complete all as specified and directed. Make : 3M Company, DARK EYE or eqev as specified and approved.

S&F Cat eye of plastic body having two ways reflector with abrasion resistant lens including fixing arrangement as per manufacturer instruction complete all as specified and directed. Make : 3M Company, DARK EYE or eqev as specified and approved.

S&F MS Solar Delineator with mesh and Pole Powder coated MS Pipe solar Delineator are made up of highly compressive material & water resistent and with fitting of solar flasher (Height of pole is 1000mm) , Base size 75 X80mm Dia is 48mm of the best in terms of both durability and performance as specified and approved including fixing arrangement as per manufacturer instruction complete all as specified and directed.

S&F PVC speed breakers of size 250mm x 350mmx50mm, are laid by first marking the loacation of hump on the pavement and marking indents in this area for proper bonding. Surfacing is then cleared of all dust and loose particles and a tack coat applied. Forms of requisite heights, shape and width are then placed, and hot premixed bituminous material is poured to the required shape, and edges rounded by trowel. the premixed marerial should be wall compacted before opening to traffic. Allowance should be made for compaction, and irregularities should be corrected using bituminous marerials having fine aggregate or by scrapping , a necessary . the material is then allowed to cure before opening to traffic complete all as specified and directed.

Matrubhoomi Construction

M/S HARIOM CONSTRUCTION COMPANY