SPECIAL REPAIRS TO BUILDING NO P-07 AT COLLEGE OF NURSING AT CHAF BANGALORE

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc

Demolition of brick or stone/boulders masonary, built in cement morter.

Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above GL complete.

Dismanttling floor hearth or wall tiling including cemet mortar bedding (but not balking) removing serviceable tiles to store

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar all as specified and as directed.

Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition ).

Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc.

Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame).

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete.

Taking down shutter of any description exe 1.00 sqm but n/exe 2.00 sqm and re fixing in the same opening incl easining etc complete all as specified and directed.

Taking down shutter of any description exe 1.00 sqm but n/exe 2.00 sqm complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 typeB1 (20mm graded aggregate) as in sub base/levelling course complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C1 (using 20 mm graded aggregate ) as in sub for receiving floor finishes/plinth protection etc. complete all as specified and directed.

M&L for chequerd cement concrete tiles glossy finished 30cm x30cmx25mm th with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thic screeed bed in cm 1:6 all as spd & direted.

S&F vitrified ceramic coloured tiles 8-10mm thick (square/rectangular) polished,area of each tiles exc 0.42 sqm b n exc 1.0 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in cm 1:6 all as specified and directed

S&F vitrified ceramic coloured tiles 8-10mm thick (square/rectangular) polished,area of each tiles exc 0.42 sqm b n exc 1.0 sqm inskirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster in cm 1:4 all as specified and directed

M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300 x450x7/300x600x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) all as spd.

M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and tabil top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes all as specified and as directed by Engr-in-charge.

M&L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified and directed

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction all as specified and as directed.(Note : WPC shall be measured and paid separately as supply only under relevent item)

Supply only liquid water proofing compound

M&L for water proofing treatment on horizontal and vertical surfaces with Providing and laying / fixing TPO (Thermoplastic Polyolefin) membrane including Cleaning the surface and laying of 200GSM Geo textile and cover up with TPO RF 1.2 mm thermoplastic membrane on roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot air gun/machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure. Make :Asian paints TPO or equivalent product of M/s Bauchemic/CIPY/SIKA/Pidilite/Dr fixit TO membrane

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded all as specified and as directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and without glazing bars complete with dovetailed or welded all as specified and as directed.

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F for 35 mm thick factory made second class hard wood plain framed panelled shutter ( two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

S&F 0.56mm Plain, Aluminium sheeting, Alloy 31000 H4 in doors,ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S&F for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F for butt hinges 100mm medium weight cold rolled mild steel.

S&F mild steel sliding door bolt plate type stove enammelled black of length 300 mm with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F 200mm long of barrel tower bolts stove enammeled black with bright bolt omplete all as specified and directed.

S&F 150mmmild steel pressed handles oval type stove enamelled black complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings.

S &F Factorey made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-In-Charge.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.

M & L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and dierected by Engg-IN-Charge

S & F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,completed and directed by Engr-In-Charge.

S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F powder coating aluminium door shutters (any type, normal or sliding), aluminium section Powder Coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified pecified and directed by the Engr-in-Charge.

S&F powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws

S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fixing 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations

S&F 5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 Sqm in each panel all as specified and as directed.

S& F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixe

Door closer hydraulically aluminium cast body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F for pre-painted galvalume aluminium zinc coating GI based carrugated steel sheet 0.50 mm th of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismentling structural steel framed trusses etc n exc 10m complete all as specified and directed.

Dismentling structural steel work incl door gates but excluding framed work all as specified and directed.

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. fe-410 (gde E-250)

S&F plates(plain or chequered) channels,distance pieces, cleats etc.square cut or notched including riveted, bolted or welded attachment

S&F Framed work such as grills ,shouldered and/or riveted, or forged into spikes; framed,guard bars; barred iron doors; ladders; framed balusters; walk,ways; railings; framework of water tanks and similar work,conforming to Fe.290.Gde-E-165

S&F welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F mild steel, plain, black sheet t in hearths;covering to door shutters; covering to doorchowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughsand funnels, etc. cut tosize edges beaded ifdirected,holes punched;including round headedscrews, clout nails orrivets and fixed to woodor steel members, etc.,with plain 40 mm lapjoints or welded/riveted seams includingbending, turning up,mitred angles, stoppedends, outlets, etc. as required.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Dismantling water storage tanks of any description,exc 250 & n.exc 500 litres capacity and removing from site complete all as specified.

S&F for Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high prressure oof PTMT with epoxy coated alu rod & high density plastic ball complete all as specified

S&F repair vitreous china wash basin down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete all as specified and directed by Engr-In-Charge.

S & F repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-In-Charge.

S & F repair PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe ccomplete all as specified and directed by Engr-In-Charge.

S&F repair vitreous China wash basin, white flat back, size 550x400mm including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete cutting for and pinning in ends of brackets or ereesing stand complete all as specified and directed by Engr-In-Charge.

S&F repair 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-In-Charge.

S&F in repair PVC connection pipe 600mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed by Engr-In Charge..

S&F in repairs Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge.

S&F Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

S&F 110 PVC sanitary conncetion for WC complete all as specified.

S&Fin repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-In-Charge.

S&F in repairs brass chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed.

S&F in repair CP two way stop cock with all accessories complet all specified and directed. Make :Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repairs 15 mm bore fency type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.

S&F gratings doom , 100mm dia of PTMT(minimum weight 25 gms) complete all as specified and directed

S&F gratings doom , 125mm dia with waste hole of PTMT(minimum weight 40 gms) complete all as specified and directed

Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

S&F 15 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc

S&F 20 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc

S&F 25 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc

S&F in repair 25 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed.

Dimantling pipes of any desc.fixed to wall or laid under floor complete

S&Fin repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor

S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor

S&F (SWR) 75mm dia floor trap,plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-In Charge..

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed

S & F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal

S & F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel, drain, all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and as directed.

M&L for pre-cast cement concrete (reinforced )slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover/ slab covers set in cement mortar 1: 4.including necessary form work complete.

M & L 10 mm dia and over high deformed TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed n. less 0.9mm dia.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out complete

Demolition and breaking up drain pipes , 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar as cin foul conditions.

M&L 150mm Concrete bed to drain pipe 150mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2 complete all as specified and directed

M&L Salt galzed stone ware drain pipe , grade 'A' of 150mm dia laid in trenches and jointed including all accessories & fittingscomplete as specified

Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil)

Removal of excavated surplus (soils) at a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc refixing the same in same position all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs,weather boardings, plywood including cover fillets etc.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm th plain PVC sheet suitably placed in false celing grid made of aluminim GI/MS as per specification and drawing complete.

M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint complete

M&L for applying 2mm thick wall care putty on wall including preparation old s/new surfaces plastered or unplastered surfaces , complete all as specified and directed.

M&L for applying two coat of OBD to old treated surfaces of wall including preparation of old surface of walls through mechanical means (by washing down,rubbing down and stopping of distempered surface),complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilling and applying two coat of white wash complete all as specified and as directed.

M &L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a coat of chalk primer through mechanical means complete all as specified and directed.

M &L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls through mechanical means complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed..

M&L for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth including preparaton of surfaces all as specified and direcet by the Engineer-in-Charge.

Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 30.00 Km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed

VARGHESECHACKO AND CO

M/S Suresh Raju