REPAIR REPLACEMENT TO JOINERY PLUMBING SANITARY FITTINGS KOTA STONE FLOOR WALL TILES OF NEW AMMUNATION DUMP AND CERTAIN BLDG OF ZONE B AREA INCLUDING REPAIR MAINT RESURFACING OF EXISTING ROADS OF ARMY AD RECORDS DOI AND OFFICERS MESS OF ZONE B ARE

Amount

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No. 07 above but on vertical surface of wall of size 600x600x10mm thick as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 200x300x7 mm thick on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10mm thick rendering in CM 1 :4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per Item No. 11 above but on vertical surfaces area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as skirting non skid ceramic tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per Item No.13 above but on vertical surfaces area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as skirting non skid ceramic tiles complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for cement concrete tiles of size 250 mm x 250 mm x 20-22 mm thick machine pressed set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L moorum / red bajri filling in floors or pavings laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B-O using 12.5 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surface of wall in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound complete all as specified and directed. (Note: supply only of WPC shall be measured and paid for seperately )

Supply only integral water proofing compound complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) exc. 1.5 sqm but.not exc. 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exc. 1 sqm each. complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for fixing of hold fast and making good disturbed surface complete all as specified and directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed.

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165.

S&F 100mm size butt hinges extruded aluminium alloy with alloy with galvanised mild steel hinge pin,complete all as specified and directed.

S&F 75mm size butt hinges medium weight (ISI Marked), extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type-C21 complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed in floor complete all as specified and directed.

S&F 20 mm dia curtain rod mild steel, chromium plated with fixing bracket stops, roller etc and taking down old pipe complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 250mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Takig down pelment boxes/cupboard shutters of any size and any type complete all as specified and directed.

M&L for 18/19 mm thick pelment boxes/cupboard shutters of required size making with particle baord with leaping & Painting, medium density,flat pressed,single layer type or three layer type adhesive,fixed with screws to timber frame work,key holes at ends and fix gutties on walls complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS Tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC Sheets for top rails lock rail & bottom rail on eighter side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , suppling & fixing in the frame at site complete all as specified and directed.

Taking down aluminium door and windows of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 and applying two coats of plastic emulsion paint as per existing treatment complete all as specified and directed.

S&F anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters (Door shall be size approx 1.2mx2.1 in single leaf) complete all as specified and directed.

S&F aluminium anodised galzed hung type window shutters made out from anodised aluminium frame of 'H' section size 34.00x43.5x2mm thick with 4mm tinted sheet galss (Weight not less than 0.57 kg/RM and shutter 'Z' of size 34.00x43.5x28.00mm having thickness 2.00mm (Wt not less than 0.50kg/RM) and all necessary jointing cleats , glazing, clips rubber packing, aluminium snap beading Tower bolt 100mm long 1 No and sliding hinges 180mm longs including aluminium grill with Mosquito proofing etc complete all as specified and directed.

S& F in repair double action floor spring Hydraulically regulated made up of Min 1.25 mm thick aluminium alloy sheet foundation Box Main Body with stainless steel cover governing Pivot made of brass, other parts made of mild heavy duty and fixed etc complete all as specified and directed.

S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames, aluminium frame glazed with putty or fixed with beads in repairs complete all as specified and directed.

S&F in frepair glass pan ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified and directed.

S&F 3mm thick sheet glass/ pin headed ordinary quality & glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S & F, 300mm long MS ordinary rat tail rod pattern springs incl. roller & roller plate complete all as specified and directed.

Demolition of RCC as in bands,linter and similar suspended work complete all as specified and directed.

Use and waste of form work to soffits of ssupended slabs such as roof slabs, floor slabs, landings and similar works n.exc 200mm thick (Horizonal or slopping) for rough finished surface of concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (using 12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for MS TMT bars, 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles).

M&L for Providing precast cement concrete with type B-0 PCC 1:2:4 (using 12.5 mm graded stone aggregate) set in CM 1:4 louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, incl. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed.

S&F in repair viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and directed.

S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 withgrating and Union for discharge pipe including all necessary items complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F health faucet with fluxi pipe and hand shower ,the length of hose 1.50mt fitted to the tap complete all as specified and directed.

S&F in repair EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour complete all as specified and directed.

Taking up & down 15 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up & down 20 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up & down 25 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

S & F 15mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 20mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 25mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

Re-fixing old 15mm bore GI steel tubing comlete all as specified and directed.

Re-fixing old 20mm bore GI steel tubing comlete all as specified and directed.

Re-fixing old 25mm bore GI steel tubing comlete all as specified and directed.

Demolition of cement concrete (un-reinforced) other than ground floor compelte all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using (12.5mm graded stone aggregate ) as in sunken floor mixed water proofing compound finished surface even and smooth with using extra cement complete all as specified and directed. Note : water proofing compound shall be measured seperatly.

M&L rendering 15mm thick cement plaster in cement mortar 1:3 as in brick/concrete surface of sunken portion using water proofing compound complete all as specified and directed. Note : water proofing compound shall be measured & paid seperately

M&L wire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or pea size gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

M&L Cement concrete 1:5:10 type E2 using 40mm graded stone concrete as in sunken floor, foundations, filling and mass-concrete finished surface fair and even complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store complete all as specified and directed.

Dismantling PVC water tanks exc 1000 ltr but n. exc 2000 ltr capacity and removing to store complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S & F in repair 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per Item No. 104 above but 25mm bore

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube complete all as specified and directed.

S&F in repair 15 mm dia brass elbows both ends screwed and fixed complete all as specified and directed.

S&F in repair 20 mm dia brass elbows both ends screwed and fixed complete all as specified and directed.

S&F in repair 15 mm dia brass union to connect iron to polyethylene and fixed complete all as specified and directed.

S&F in repair 20 mm dia brass union to connect iron to polyethylene and fixed complete all as specified and directed.

S& F 125 mm dia Grating doom with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2, laid as in plinth protection/paving etc finished even & smooth with out usnig extra cement complete all as specified and directed.

S & F in repair 125 mm Brass chromium plated shower rose complete all as specified and directed.

S & F in repair lid/cover of water tank capacity of 1000/500Ltrs including necessary cleats/clamps complete all as specified and directed.

S&F SS toilet paper holder with flap complete all as specified and directed.

M&L in repair 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Demolition and breaking up PVC(SWR) pipes any size in any position complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

All as per Item No.120 above but 110mm bore

S&F 110 mm bore PVC (SWR) bend without access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend without access door complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend with access door complete all as specified and directed.

S&F 75 mm bore PVC(SWR) bend with access door complete all as specified and directed.

S&F 100 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for repair to potholes any depth, n.exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for preparation of existing blacktop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

M&L for premix bituminous macadam with 4% binder paving bitumen (VG 10) content by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and rolled with power roller 8 to 10 ton complete all as specified and directed.

M&L for laying and spreading of bituminous pemixed asphaltic semi dense concrete 40 mm cnsolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete using paving bitumen (VG 30) any penetration. ( The SDAC laid with mechanical paver and rolled with 8-10 tonne tandom power roller) complete all as specified and directed.

M&L for preparation of new/old surface of road and applying 1.0mm thick and 100 mm wide reflective resign thermoplastic paint by hot application of approved colour/make complete all as specified and directed.

S&F of colour reflective pavement marker (cat eye) with micro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistant creamer coating fixing of road surface with special adhesive and Suitable rivet head nail complete all as specified and directed.

S&F Sparkle solar road studs size 125 mm x 125 mm x 90 mm ht with detachable battry 6 LEDs three on each side, ultra bright LED in red/yellow colours completely water resistant and weather proof, using of adhesive and fixing procedure as per manufacturer supervision of their competent technician etc complete all as specified and directed.

S&F "Sparkle road side delineators with tri colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified and directed.

S & F Alcolite spring post/flexible delenator, strong flexible UV protected PU & PVC with high intensity reflective light material crystal lattice, 75mm dia 750mm height including all necessary fittings complete all as specified and directed.

M&L for 75 mm thick spread thickness Moorum/red bajri spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M/S K MURALIDHARA PATRA

Likitha Enterprises

S J ENTERPRISES

MM ENGINEERING SYSTEMS

G.KRISHNA MURTHY AND PARTNERS

M/s MAA BHAIRABI ENTERPRISES

M/S JAGANNATH SASMAL