WBPWD/SSE/SWEC/NIQ115/2025-26

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

On board

Supplying and fixing 415V 100 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make- Legrand/Lauritz Knudsen (L&T)/Siemens/Schneider]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way [Enclosure 607913] Incomer:- 415 V 4 Pole 100 A MCCB [Breakin Capacity 25kA/35kA]- 01 Nos Outgoing:- (i) 415 V 3 Pole 63 A MCB [Breaking capacity 10kA & C characteristics]- 02 Nos (ii) 240 V 1 Pole 32 A MCB [Breaking capacity 10kA & C characteristics]- 06 Nos (iv) Cable end box- 2 nos [ Make:- Legrand/Siemens/Schneider]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way [Enclosure 607715] Incomer:- 415 V 4 Pole 63 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 12 Nos. [Make:- Legrand/Siemens/Schneider]

Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 way [Enclosure 607712] Incomer:- 240 V 2 Pole 40 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 12 Nos [ Make:- Legrand/Siemens/Schneider]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) on existing Modular GI switch board with top cover plate incl. making necy. connections etc

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. ( inverter input & output terminal)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) & necy Connections.( inverter input & output terminal)

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) , 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.(make: ISI- medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(for morrum)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages

No. 4 SWG

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supply & Delivery of 18 watt or 20 watt LED TUBE Philips Cat No. Mas LED Tube 1200mm 18W 865 T8 I-2100im/ Crompton-Cat No. LTB-20-865-(2) or equivalent make and model of Wipro)

Supply & Delivery of Twin LED Tube light fittings (Make- Signify (Philips), Cat No. TMC-502 2xT-LED 22W or equivalent model of CG Fittings-IGP162LT8-16 2xT8 or equivalent model of Wipro)

Supply & delivery of LED bulk head light fitting (Philips Cat no.-WT202W LED6S NW PSU S3 PC/ Crompton Cat No- CIS-306-10-57-SL-DP-NBK/Havells).( Main building toilet)

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- New Breeze (5yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC.

Supply and delivery of Heavy Duty Exhaust Fan 250V 9''dia. (Make: EPC}

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. 250V 9''dia

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) Al .250V 9''dia

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire

Supply and fixing of 9 Watt LED Bulb(Make:- Philips/Bajaj/Crompton)

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board

Fixing mirror light fittings as per the direction of EIC.

Supply and delivery of mirror light fitting (Make: Philips, Cat - BN 021 LED12S 6500 PSU GR or equivalent model of Crompton/Wipro)

Supply and Delivery of 230 V, 50 HZ, 450 mm, 90W, 1325 RPM,110 CMM, high flo oscillating type, metal blades Wall Bracket fan operated by pull cord switch with inbuilt regulator. ( Make:- Crompton Cat No- 450mm SSTORM 2 ( METAL BLADE) /Orient Electric - Tornado Wall II/USHA Cat No. 450MM DOMINAIRE WALL FAN )

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS03ANA00/Siemens/Schneider) 2) 2 Pole Power Contrcator (L&T-MNX 25-2P Cat No-CS90240/Siemens/Schneider ),---- 02 Nos. 3) 20A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T)] --- 02 Nos 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) ) 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make) 5) (2+16 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply and delivery of Street light fittings minimum luminous efficacy 120Lm/Watt High Power LED. (Make: Signify(Phlips) Cat No. BRP333 LED 110 CW R5C FG PSU S1 V1/CRP-411-90-57-SL-GL-NSG or equivalent model of Wipro) Onsite five(05) years warranty by OEM. The OEM warranty certificate, clearly and explicitly stating a warranty period of five (05) years, shall be submitted to the Engineer-in-Charge (EIC) prior to execution of the work.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting(200 x 150 x 100mm)

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through 13/19 mm thick Polythene pipe. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

Supplying & Delivery of following sizes cable. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

4 core 35 sqmm AL/A XLPE

2 core 10 sqmm AL/A XLPE

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

4 core 35 sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 core 10 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

4 core 35 sqmm )

2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 35 sqmm )

2 core 10 sqmm