Construction of Escape / Escape Channel on Upstream side of Tube Syphon of Beora Canal

Amount

Earth work

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Dumping stone in Horizontal on level excluding cost of stone.

supply of stones (Quarry)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platforms

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or mor

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

fabrication and installation /commissioning of gates incl. all carriages upto site of work as per specification:- a) shutter of size 1.50m x 1.50m. The shutter shall be fabricated with ISMC 125 frame with supporting members with 8mm plate on one sides. b) winch rod of 50-55 mm dia (double square threaded) of required length , with sleeve of appropriate dia. c) Single heavy duty thrust bearing 3 MT capacity winch Machine ( worm gear and lock type), with brass gun metal bush nut of appropriate dia of standard quality and brand. d) 150mm rubber seal (PVC ist quality). e) casing of winch rod and machine. f) The whole structure shall rest on superstructure supported by ISMC 150 channels. g) Two coats of synthetic paint ( water resistant Epoxy paint) over a coat of red oxide primer. h) All accessories as required , incld nuts and bolts , flats etc. i) All carriages , of all items incl fabrication at site complete job as per the directions of Engr- in Charge.

Carriage of materials from source upto site of work by M.T.

40 mm stone aggregate av 22 kmts by M.T

20 mm stone aggregate av 22 kmts by M.T

Sand av 14 kmts by M.T

Cement av 11 kmts.by M.T

Stones av lead of 5 kms by M.T

steel from divisional store av 11 kms by M.T

IMTIYAZ AHMAD LONE

FAYAZ AHMAD DAR

REYAZ AHAMD DAR

MOHD ABDULLAH MANTOO