GE/S(U)-64/2020-21 PROVN OF OPEN REPAIR SHED WITH HARD STANDING FOR 536 FIELD REPAIR INCREMENT OF 4 PARA (SF) PROVN OF STORE NEAR BLDG NO P-157 AT MBSC AND CERTAIN REVENUE WORKS AND MINOR WORKS UNDER GE (SOUTH) UDHAMPUR

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard rock complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken stone boulders mixed with boulders complete all as specified and directed.

Removal of excavated material to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Returning filling in including spreading levlling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Cement concrete (1:5:10) type E-2 (using 40 mm graded stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and directed.

Brick work with sub class 'B' bricks 6 mm mean radius straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed.

15 mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and directed.

15 mm thck rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar complete all as specified and directed.

Supply only (LW+) water proofing liquid solution of Dr fixit/sikka or equivalent make complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded stone aggregated) as in plinth band, lintel band, roof band, lintel bands and other similar bands etc. complete all as specified and directed by Engr-in-Charge at site.

Rolled section as inframing cladding, glazing and the like fixed with angle cleats and connecting plates confirming to Fe-410-W (Gde-250) quality-B complete all as specified and directed.

10 mm thick cement plaster on fair face of brick or concrete surface in cement mortar 1:3, finished even and fair, as in backing coat to receive tiles complete all as specified and directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in floor finished even and fair complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:4 complete all as specified and directed.

7 to 8 mm thick non skid coloured ceramic tiles (area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm) etc. set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments complete all as specified and directed.

300 mm x 600 mm x 7 mm/300 mm x 450 mm x 7 mm thick coloured ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments complete all as specified and directed.

15 mm bore stop cock chromium plated screw down under high pressure with crutch or butterfly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed.

20 mm bore stop cock chromium plated screw down under high pressure with crutch or butterfly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed.

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges in repair complete all as specified and directed.

15 mm bore long body bib tap complete all as specified and directed.

Chromium plated soap dish and fixed with CP brass screws in wooden/plastic cleat in repair complete all as specified and directed.

Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminis) complete all as specified and directed.

Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminis) complete all as specified and directed.

Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

50 mm thick for PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in surface channel and drain beds including all necessary form work complete all as specified and directed.

Rotational moulded polyethylene water storage tanks threaded and three layers (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Part-I, 1000 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut com.

Viterous China urinal half stall type white including CP spreader, waster pipe etc. complete all as specified and directed.

PVC flushing cistern 10 ltrs capacity with complete in let ball valve complete all as specified and directed. Make : Perryware/ CERA

Viterous china wash hand basin flat back size 580 x 450 mm excluding traps, waste, chain, plug and porcelain stopper including brackets complete all as specified and directed.

15 mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and directed.

Three coats of white wash on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard rock complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Cement concrete 1:2:4 type B-1 as lintel up to 1.5 m clear span including weathering, slightly rounded or chamfered angles and throughting complete all as specified and directed.

Mild steel, 1.25 mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required including one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E-165) complete all as specified and directed.

10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in in floor and finished even and smooth complete all as specified and directed.

40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor and finished even and smooth complete all as specified and directed.

75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in floor/sub-base complete all as specified and directed.

Sand cushioning under floors including watering and consolidation complete all as specified and directed.

80 mm, M-40 grade thick, machine pressed/ vibro mechanically floated interlocking paver block any shape and size confirming to IS - 15658-2006, with topping of cement mixed with grey cement and with pigment. Colour and shape shall be approved and complete all as specified and directed by Engr-in-Charge. Make: ULTRA/MODERN/RUCHI/ISI Marked

Precast cement concrete 1:2:4 type B-1 as in edges, kerb stone etc. and other similar works including weathering and slightly rounded and chamfered angles complete all as specified and directed.

Removing excavated material (soils) exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Providing 100 mm thick, cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) as in ground floor complete all as specified and directed.

Sand filling under gloors or laying interlocking tiles complete all as specified and directed.

Continuous brick edging; with width equal to the width of the brick using old size, sub class B bricks laid dry on end vertically and temping ground around bricks and also removing any surplus soil to a distance not exceeding 50 m from the starting point complete all as specified and directed.

Applying two coats of cement based paint over a coat of chalk whiting including preparation of new plastered surfaces compelete complete all as specified and directed.

Cement concrete work in pavement/Hard standing of Compressive strength M-35 Design Mix using 380 kg of cement per cum thickness of concrete laid in alternate ways, compacted with mechnical niddle vibrator and levelled by plate vibrator rough surface inluding necessary steel form work 25 cm or less complete all as specified and directed.

Rendering 15 mm thick in two layer (10+5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

Providing reinforced cement concrete M-25 design Mix (using 20 mm graded aggregate) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed.

Providing reinforced cement concrete M-25 design Mix (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Providing reinforced cement concrete M-25 design Mix (using 20 mm graded aggregate) as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports etc. for rough finished flat surfaces of concrete complete all as specified and directed.

Mild steel steel TMT bars 6 mm to 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

Forming Contraction (Dummy) joints 10 mm wide x 100 mm deep filled with sealing compound of grade "A" complete all as specified and directed by Engr-in-Charge.

40 mm thick Damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc. complete all as specified and directed by Engr-in-Charge.

RCC M-25 design Mix (using 20 mm graded chrushed stone aggregate) as in chajjas and the like complete all as specified and directed by Engr-in-Charge.

Formwork to chajjas, troughs and similar items including edges complete all as specified and directed.

Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 laying floor finishes complete all as specified and directed.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 sqm each) area with 6 mm wide joints and 10 mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance Pieces, cleats etc. Fe 410-(Gde-E-250) quality - A including one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

Rolled section as in main & cross beams, hip & jack rafter, purlin where connected ton common rafters and running rails & guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

Pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.60 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/ exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed by Engr-in-Charge. Make : Tata Blue Scope Steel ltd, JSW Steel Ltd, CRIL, Bhushan Steel.

Pre-painted colored plain steel profiled Galvalume/Zincalume sheet with min 0.60 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed by Engr-in-Charge. Make : Tata Blue Scope Std ltd, JSW Steel Ltd, CRIL, Bhushan Steel.

Mild steel screw bolts (machine made) dia meter of neck in 16 to 20 mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 30 cm long complete all as specified and directed.

Preparation of new wooden or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12 mm bar thresh hold etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

Factory made 35 mm thick 2nd class hardwood (Hollock), plain framed, panelled shutters (two panels) with lock rail and panels of 9 mm thick BWP ply or of 12 mm thick BWR grade veneered particle board medium density, with commercial veneering on both faces. The size of rail and stile as per IS : 1003 part- I, klin seasoned and chemically pressure treated complete all as specified and directed.

Aluminium anodized handles 150 mm long dia "D" type fixed to doors with screws complete all as specified and directed .

Aluminium anodized tower bolts 150 mm long fixed to doors with screws complete all as specified and directed.

300 mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips, bolts and sliding bolts etc. complete all as specified and directed .

Mild steel 150 mm ordinary rat & tail springs (Helical door springs) welded or screwed to any type of door frames including roller and roller plate complete all as specified and directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per ser Item No 84 here in before but without glazing bar complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Factory made mild steel ventilators box type with upper top hung with glazed and gaused shutters and bottom fixed type shutters along with frame including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) Glazing, wire gauge and Glass shall be measured and paid for separately.

Demolition of cement concrete (unreinforced) in ground floor and in paving exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

50 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundations filling and mass concrete complete all as specified and directed.

Coloured machine vibro mechenically floated glossy finish interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with, topping of cement mixed with imported pigment, colour and shape shall be approved and complete all as specified and directed by Engr-in-Charge. ISI Marked

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones, bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed.

Providing precast cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, kneeless apex stones, bed plates, kerbs stone provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded aggregates) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St.-240 complete all as specified and directed.

100 mm thick PCC 1:2:4 type B-2 (using 400 graded stone aggregate) as in sub base complete all as specified and directed.

Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 Sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC Concealed Conduit (ISI marked) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3 mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/regulator etc. along with PVC insulated and unsheathed FRLS 1.5 Sqmm multi stranded copper conductor cable (green color) as earth lead & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge. Make : Polycab/ Finolex/Havells.

All as per ser item No 95 but for 3 pin 5 Amp Socket outlets point controlled by one push button on Independent board with 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead complete all as specified and directed by Engr-in-Charge to match with the existing specification. Make : Polycab/Finolex/Havells.

All as per ser item No 95 but for 3 pin 5 Amp Socket outlets point controlled by one push button on Same board with 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead complete all as specified and directed by Engr-in-Charge to match with the existing specification. Make : Polycab/ Finolex/Havells.

All as per ser item No 95 but for 3 pin 15A socket outlet on the independent board with 4 sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead & complete all as specified and directed by Engr-in-Charge to match with the existing specification. Make : Polycab/Finolex/Havells.

Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and directed. Make : Havells (Crabtree)/Legrand/ Philips.

Socket outlet 2 in 1, 3 pin, 5A, 240 Volt complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and directed. Make : Havells (Crabtree)/ Legrand/Philips.

Switch socket combination 5 pin 16 amp, flush type complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips.

Ceiling rose surface bakelite 3 terminals in repair complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips.

LED tube light fitting E-Lite Pride Plus Neo 20W, 6500K, Housing made of extruded Polycarbonate with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engr-in-Charge. Make : Havells or equivalent make in Syska/Wipro/Philips/Bajaj.

LED Bulk Head fitting 10 watt, 6000K with IP 54 protection complete making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engr-in-Charge. Make : Havells or equivalent make in Syska/Wipro/Philips/Bajaj.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 degree of protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-Charge. Make : Havells/Legrand/Seimens/ Schneider. Note - MCBs will be measured separately.

MCB Single Pole, 230 Volt, B-Series, Raiting 6 to 32 Amps complete all as specified and directed. Make : Havells/Legrand/Seimens/ Schneider.

MCB Single Pole and Neutral, 230 Volt, B-Series, Raiting 32 Amps complete all as specified and directed.

Ceiling Fan 1200 mm sweep 230V AC SP Energy Saving 5 Star rating with ISI marking, including all hanging arrengements alogwith fsuitable size flexible cable conection from ceiling rose to fan complete all as specified and directed by Engr-in-Charge. Make: Havells Model ES-50 Premium or equivalent in Bajaj/Usha.

Exhaust fan Heavy Duty 380 mm sweep SP, AC, 230V, 1400 RPM, Metal body alongwith Louvers including making hole of suitable dia in existing wall and all necessary connection from ceiling rose to fan complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and directed by Engr-in-Charge.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

GI tubing light grade 40 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc. for holdining of GI pipe alongwith poles complete all as specified and directed.

Fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100% and connecting electrically in repair complete all as specified and directed. Make : Legrand/Havells/Philips

LED tube light fitting 4 feet Garnet 20W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specified and directed. Make - Havells/Syska/Bajaj

9 watt LED Bulk Head fitting complete making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as per the directions of Engr-in-Charge. Make - Havells/Syska/Bajaj

Ceiling Fan 1400 mm sweep 230V AC SP Energy saving including all hanging arrengements alogwith suitable size flexible cable conection from ceiling rose to fan complete all as specified and directed by Engr-in-Charge. Make : Havells Model Velocity ES-50 or equivalent in Bajaj/Crompton

Cabin Fan 300 mm sweep 230V AC SP including all hanging arrangements alogwith suitable size flexible cable conection from ceiling rose to fan complete all as specified and directed by Engr-in-Charge. Make : Havells Model Cera or equivalent in Bajaj/Crompton.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and directed.

Geyser (Water heater) storage type, Electric 230V, SP, AC complete of capacity 50 ltrs including all GI connection (cutting T, inserting all type of Elbow, Nipple etc.) and all necessary fixing arrangement on exiting wall complete all as specified and directed. Make : Havells Philips/Bajaj.

Sheet metal enclosure single pole and neutral with 2 pin and socket 20A 240 complete with one single pole MCB of any cap from 10 to 20 A complete all as specified and directed. Make : Havells/C&S/Schneider/Seimens.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire. Make : Havells /Polycab/Finolex.

M/S H.R CONSTRUCTION CO

R K BUILDERS

RAMAN KUMAR

s l sharma and sons