REPAIR MAINT OF INTERNAL ELECTRIFICATION WORK SERVICES INCL REPLACEMENT OF UNSV LIGHT FITTING / FIXTURES WIRING SUBMAIN WIRING DISTRIBUTION BOARD MCCB MCBS BLDG SECURITY LIGHT OF OTM ACCN AT INSIDE CENTRAL ORDANANCE DEPOT COD AREA CICG UNDER GE NOR

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 02 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed. .

All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed.

All as per the description of srl item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete all as specified and as directed.

S&F in repair of switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole two way complete all as specified and directed by Engineer -in-Charge.

S&F in repair switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete all as specified and as directed.

S&F in repair socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete all as specified and as directed.

S&F in repair socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete all as specified and as directed.

S&F in repair ding dong bell, AC, 230 volts, single pole complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F in repair ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50mm x 25mm size complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces complete all as specified and directed for one light point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 15 here-in-before but one bell point controlled by one bell push switch 06 Amps.

All as per the description of srl item No 15 here-in-before but one ceiling / Exhaust fan point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 15 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per the description of srl item No 15 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per the description of srl item No 15 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed.

S&F modular bell push with indicator, 06 Amps, single pole, one way, 230 volts, complete all as specified & directed.

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts, one module complete all as specified & directed.

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed.

S&F modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed.

S&F modular ceiling fan regulator, 02 module, AC, 230 volts, 120 watts, duly ISI marked complete all as specified & directed. Note : Make/Model for Srl Item 21 to 26 shall be as per existing at site.

S&F in rapair lamp holder, PVC / Polycarbonate fancy type suitable for batten fitting including 9W LED bulb complete all as specified and as directed.

S&F in repair 10/12W LED TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repair on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. Makes :- Eveready: Cat Part No LEDBTA02016-02/ Havells: Cat Part NoLUMILINEPLUSPROBS20WLED865SPCSSIND/Philips: Cat Part NoBN170CLED20S6500 PSUL120

S&F in reapair decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete

S&F in repair Supply and fixing LED luminaire 600mm x 600mm x 70mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete. Makes :- Eveready: Cat Part No LEDPLB03616-03NS/Havells:Cat Part No VENUSTREND2x2PLR36WLED865SWH/Philips: Cat Part No RC380BLED36S-6500G6L60W60PSU0DS1

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts & washers complete

S&F LED street light fitting 72/75 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts & washers complete, Makes :- Eveready Cat Part No LEDSL07215-PC/Philips- Cat Part No BRP032PLED75CWSLRPSUGRSPD/Havells - Cat Part No ENDURASUNBEAMSL72WLED757SASYTOPC

Taking down of existing u/s highbay lights and Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete.Makes :- Eveready: LEDFL10015-04 ,Havells: JETALEGANZAFLS100WLED757P60DTOTG & Philips: BVP282LED120CWFGSY5WB100WV1

Taking down of existing u/s highbay lights and Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete. Makes :- Eveready: Cat Part No LEDFL15015-04/Havells: Cat Part No JETALEGANZAFLS150WLED757P60DTOTG/Philips: Cat Part No BVP283LED181CWFGSY5WB150WV1

M&L for sub main wiring with 2x1.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring.

All as as the description of srl item No 36 above but for 02 x 2.5 Sqmm for phase & neutral and 01x2.5 Sqmm for continuous earth wire

All as as the description of srl item No above but for 02x4 Sqmm for phase & neutral and 01x4 Sqmm for continuous earth wire

All as as the description of srl item No above but for 02x6 Sqmm for phase & neutral and 01x6 Sqmm for continuous earth wire

S&F in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete

S&F in repair industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 32 Amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete

S&F in repair industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 63 Amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete

S&F in repair sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete

S&F in repair sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and incl. of followings :- (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts,16 KA - 01 No. (b) MCB, SP, AC, 230 volts of 06 to 32 Amps, "C" curve, 10 KA - 12 Nos.

S&F sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 06 ways with 400 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and including of the following:- (a) MCCB, 250 Amps, 03 pole, AC, 415 Volts, 25 KA - 01 No. (b) MCB, SP, AC, 230 volts of 63 Amps, "C" curve, 10 KA - 20 Nos.

S&F in repair MCB, SP, AC, 230 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F in repair MCB, DP, AC, 230 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F in repair MCB, DP, AC, 230 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F in repair MCCB, with fixed type 63 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete

S&F in repair MCCB, with fixed type 100 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repair MCCB, with fixed type 125 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete.

S&F in repair MCCB, with micropreocessor release 160 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete

S&F in repair MCCB, with micropreocessor release 200 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete

S&F in repair MCCB, with micropreocessor release 250 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete

S&F or passing through PVC conduit pipe of 50mm pipe, 25 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete

S&F or passing through PVC conduit pipe of 110mm dia pipe, 50 Sqmm,3.5 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete

S&F air circulator fan, steel body AC single Phase. 230V oscilating suitable for wall mounting of size 450mm sweep heavy duty complete and taking down old oneand deposit it to MES store yard with and incl all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

Taking down exhaust fan any make carefully,and deposit it to MES store yard supply and fixing exhaust fan steel body AC single phase 230 Volts of size 600mm sweep heavy duty with blade and frameand louvers complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete .

S&F exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete. (Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.)

S&F in repair Supply and fixing LED luminaire 4 X 1 feet, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete

S&F in repair Supply and fixing LED luminaire round type of size 6" dia, 12/15 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete

S&F in repair Supply and fixing LED luminaire round type of size 8" dia, 12/15 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete Note : All works to be executed in Restricted Area and in bldgs upto 15 Mtrs height, Quoted Rates deemed to be included All T&P reqd at site and Limited Working Hours as applicable.