SPECIAL REPAIR TO BLDG NO P-64(OFFRS ACCN) OF ARMY AVN SQN(UH), PROVN OF 01 X KEROSENE WATER HEATING PLANT OF 500 LTRS FOR TROOPS OF HQ 3 SECTOR RR CAMP AND PROVN OF CHAIN LINK FENCE WITH EXIT GATE FOR MT AREA OF 207 ARMY AVN SQN AT MANASBAL UNDER GE

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws upto the height of 10 m complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws upto the height of 10m complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 Upto the height of 10 mtrs complete all as specified and directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm complete all as specified and directed.

S&F Providing and fixing Gypsum Board 10mm thick decorative type in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @2% by weight of cement and finished surface even and smooth without using extra cement including necessary scaffolding etc. (WPC paid seprately) complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M & L 15mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M&L applying two coats of Distemper oil emulsion, white or tinted over 2 mm thick wall care putty on new wall surface including preparation of surface all complete and as specified.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick birla white putty including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of old decorated walls etc , properly making of v shape crakes and filling of all crakes with crake seal of walls complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed.

M&L for complete removal of existing treatment from Ceiling (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of 3mm thick wall care putty including preparation of surfaces complete all as specified and directed. Note: The time difference between one coat and two coat complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified.

S&F 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&Fpowder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws anodised aluminium fittings such as peg stays 150mm long, hinge type B-21 100mm long, suitable handle complete all as specified

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F for Anodised aluminium grill rectangular section 4 x 6mm and mesh Size 50 x 50mm (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction complete all as specified and directed.

S&F tinted glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement and complete all as specified and directed.

S&F in stainless steel Butt hinges 100mm size, medium weight, complete all as specified and directed.

S&F in extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and directed.

S&F in Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed.

S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 20mm bore mild steel cromium plated curtain rods, suitable for door/windows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises as specified and directed.

M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed.

Description all per ser item No 44 above but as in skirting over 10 mm thick screed in CM (1:4) as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed.

S&F coloured glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, skirting, aprons etc. complete all as specified and directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:4) complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut in skirting/dado over 15mm thick plater in CM (1:6) & jointed witht grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) pan, white(excluding fixing bolts, flushing cistern and flush pipe) etc.. complete all as specified and as directed.

S & F plastic seat cover white closed pattern with flat bottom and cover and mild CP aluminium hinging device all as specified and directed.

S & F in repair PVC 10 ltrs capacity low level flushing cistern complete set including flush pipe all as specified and directed.

S & F in repair vitreous china wash basin, white flat back size 550x 400 mm incl. brackets ,cutting for pinning in ends of brackets as fixed all as specified and directed.

S & F in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and as directed.

S & F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F shower arm 15mm size, 195mm long with bend of 45 degreee with flange of PTMT any colour. (min. weight 40 gms) complete all as specified and directed.

S&F in repair brass chromium plated wall mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed.

S&F in repair brass chromium plated pillar mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed.

S&F MS Grating doom 100 mm dia (min. weight 25 gms) complete all as specified and directed.

S & F soap dish brass chromium plated fixed to wall with brass chormium plated screw and plastic plug etc. completed all as specified and directed.

S&F for Rotational moulded polyethylene 500Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position including dismantling all as specified and directed

S & F Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe & fixed. (min weight 15mm-142 gms) all as specified and directed.

S & F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool pre-formed mineral wool pre-formed `SNAP ON' pipe secions of density 144 Kg/cum conforming to IS 9842 on pipe of internal dia 20 mm complete all as specified and directed.

M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

S&F 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenchesof size 25mm ,complete all as specified.

Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S & F in repair 15mm bib tap chromium plated with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

S & F in repair 15mm angle valve angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed.

S & F in repair 15mm 2 in one angle cock angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed.

S & F PVC connection pipe 15mm size with PTMT nuts of length 600mm all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

M & L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F 110 mm dia unplasticised PVC pipes of pressure rating 10kgf/sqcm fixed complete to walls, ceiling etc, any type of pipe all as specified and directed.

Description all per ser item No 80 above but 75mm dia complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

Description all per ser item No 82 above but 75mm dia complete all as specified and directed.

S & F 110 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed.

S & F 75 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed.

S & F 110 mm dia PVC (SWR) bend any radius.

Description all per ser item No 86 above but 75mm dia complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia provided with eccess door

Description all per ser item No 88 above but 75mm dia complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

S & F 110 mm dia PVC (SWR) vent cowl all as specified and directed.

M&L Concrete bed to 100mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

M&L Concrete bed to 75mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L 75 mm thick Cement concrete type B2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M & L for Brickwork with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exec 6 M mean radius build in CM (1:6) complete all as specified and directed.

Surface excavation soft/loose soil n. exc 30 CM deep and averaging 15 CM deep and getting out complete all as specified and directed.

M&L hard core broken stone or boulders of gauge n exe 63mm, deposited, spread and leveled in layers n exe 15 cm thick, watered an rammed to a true surface complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling mass concrete etc complete all as specified and directed

M&L PCC 100mm th type C2 1:3:6 (40mm graded stone aggregate ) as in sub base and finished the surface rough to receive base complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (20mm graded stone aggs) 40 mm thick as in floor finish complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for roof trusses(framed) quality 410-W(Gde-E-250) quality A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets, framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc all complete all as specified and as directed.

M & L for mild steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe410-complete all as specified and directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of area exc 10 cm width or girth complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out for soft/loose soil complete all as spd and directed

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finised even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparing new plastered surfaces of wall applying two coat of cement base paint on wall surface complete all as specified and directed.

M & L Providing, cement concrete (1:2:4) type B-1(using 20 mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and type to any type of standards rails staining bolts etc including provision of binding wire complete all as specified and as directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 11 to 15 mm complete all as specified and directed.

M&L TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Description all as per ser item No 119 above but 5mm dia an over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed.

S&F Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-W(Gde E-250) quality A complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.

Removing excavated soil exc. 50m but n exc 250m & depositing where directed at a level n exc. 1.5 m above the starting point

Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and making good the distributed surfaces as existing

Taking down and Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC concealed conduit 19/20 mm bore (ISI marked) and accessories (concealed in wall & surface in ceiling complete including cutting ,chases & making good disturbed surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan / exhaust point / bell push point controlled by one way switch 5 Amps and/or through regulator complete all as specified and directed by Engr-in-Charge. Note : (a) wiring shall be done by using colour coding. (b) Earth wire shall be of green in colour.

Taking down and Material & labour for point wiring complete with single core 4 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC concealed conduit 19/20 mm bore (ISI marked) and accessories (concealed in wall & surface in ceiling complete including cutting ,chases & making good disturbed surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 4 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly for One 3 pin socket outlet. 15 amps, independent controlled by one way switch 15 Amps and/or through regulator complete all as specified and directed. complete all as specified.

Description all per ser item No 130 above but One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F of Modular Fan step regulator, 120W - 2 module, complete all as specified and directed.

M & L for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L for Modular Switch socket Combination 16A, 6 pin, 3 module, independent board,complete all as specified and directed.

M & L for Modular Switch socket outlet 3 pin 5A flush type, independent board, complete all as specified and directed.

M & L for Modular switch 1 way 6A, 1 module complete all as specified and directed.

M & L for Bell, AC, 230 volts, single pole,complete all as specified and directed.

M & L for Modular Bell push 6A 1 module, complete all as specified and directed.

S & F of Modular Metal Flush box for 6 Module complete all as specified and directed.

S & F of Modular Metal Flush box for 3 Module complete all as specified and directed.

S & F of Modular Metal Flush box for 1/2 Module complete all as specified and directed.

S & F of Modular White cover plate with frame, 6 module complete all as specified and directed.

S & F of Modular White cover plate with frame, 3 module complete all as specified and directed.

S & F of Modular White cover plate with frame, 2 module complete all as specified and directed.

M & L for sheet metal enclosure single door for DBs when MCCBs to be used TPN-4 way,415 volts with 200 Amp rated bus bar IP 43/54, IS-8623 complete all as specified and directed.

S & F of 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of rating TPN 100 AMP complete all as specified and directed.

S & F of SPN, Single Door, 240 V, 8 way Sheet Metal Enclosure for MCBs complete all as specified and directed.

Servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet, two coat of painting and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.

Servicing of ceiling fan by disconnecting the electric supply, dismantling the ceiling fan and oiling and greasing ceiling fan by using appropriate grade of oil/grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning and two coat of ceiling fan complete and tesing after hanging property and reconnecting electric supply complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm, 2 core nominal cross section in service connections complete all as specified and directed.

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC surface conduit 19/20 mm bore (ISI marked) and accessories , terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly for One light point controlled by one way switch 5 Amps complete all as specified and directed.

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC surface conduit 19/20 mm bore (ISI marked) and accessories , terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly for One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

S & F of 1X18 watt 4 ft long LED Batten housing with white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed.

M & L for Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

Supply and fixing Switch Piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fixing of Single Pole and Neutral, Single Door, 240 V, 4 way Sheet Metal Enclosure for MCBs complete all as specified and directed.

Supply and fixing of SPN 32-40 Amp, 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of SP 5 to 32 Amp, 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning.

Supply installation testing and commissioning of 500 Ltr kerosine/Diesel based HOT water plant with fuel tank and accessories with 500 Ltr water heater boiler having capacity of 35000 Kcal/hr oil fires with thermostat one inch thick glass wool insulated, automatic air release valve, oil burner, MS oil storage tank of 200 Ltrs capacity with powder coated outer body complete all as specified and directed.

Supply and installation of MS flue gas exhaust pipe made out of 3 mm thick MS sheet, minimum 1.2 m above the highest point of the plant room and including connection from Hot Water generator to main vertical exhaust pipe fabricated from 3 mm MS sheet. The item shall be complete with the mounting/ fixing arrangement. The Hot Water generators shall be connected to an independent flue gas exhaust pipe of suitable size and as per manufacturers guide lines. The portion of the flue gas exhaust pipe inside the building shall be insulated with fiber glass insulation wool of 24kg/cum with aluminum cladding. The item shall be complete with mounting/fixing arrangement

S&F Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm dia complete all as specified and directed. Make : Jaquar/Prayag or equivalent

M&L for cutting the existing GI Tubing of size 50mm dia for taking new connection of 25/40 mm dia PPR pipe complete with all fittings all as specified and directed

S&F automatic voltage stablizer for low and high voltage connected equipped with electronic transistors relay suitable for connection of single phase, 50 Hz AC supply complete with voltmeter and designed for input voltage 170-220 Volts of capacity and output voltage stablized 230 Volts (+/-) 2.5% ) of capacity 01 KVA.

S&F ball valve with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe suitable for 25 mm bore complete all as specified and directed.

Supply, laying, testing and commissioning of LT under ground cable XLPE insulated armoured, heavy duty, elelctric cable, size 16 Sqmm 2 Core with stranded aluminium conductor, 1100 Volts grade conforming to IS -7098 (Part-I) 1988 laid in trenches /walls/floors /ducts etc fixed with saddle and clamps or passing through pipes complete with cable ends connection with proper thimbles nut bolts washer all as directed .

Supply, laying dry river sand in trenches for protection of cable complete all as specified and directed.

M&L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parelled to the length of cable complete all as specified and directed.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade concealed in walls/roof/floors all as directed by Engineer in Charge. Notes:- (i) Two wires of 4 sqmm and one wire of 4 sqmm and one run of PVC conduit shall be measured as one unit.

Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor for hot water supply of 32Mtr head Range Discharge /700 LPH complete with accessories including, pressure gauge,NRV,pressure cutout switch, pressure tank, cement concrete foundation and all as specified and directed . (Note:- Pump should be fitted with mechanical seal and operative under temperature between 60⁰C to 75⁰C) complete all as specified and directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

M/s Nasir Rasool Dar (BID ID -3471944)

M/S Manzoor and Co (BID ID -3471450)