SPECIAL REPAIRS TO NO 2 AIRMEN MESS AND BILLETS AT 1 WING AIR FORCE UNDER GE AF SRINAGAR

Amount

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level), and removal of debris from site, complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any descrition including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed

Material and Labour for 25mm thick Cement Concrete type B-1, (1:2:4) using 20 mm graded stone aggregate as in floor finishes, complete all as specified and directed.

Material and Labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:6, complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface, size of tiles 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, laid over 10 mm thick cement plaster in CM 1:4 , Complete all as specified and directed.

Material and Labour for PCC 1:2:4 type BO (12.5 mm aggregate) as in surface channels and drains, complete all as specified and directed

Extra for forming fair finished drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, Complete all as specified and directed.

Demolition of brickwork built in CM, including all quoins, arches, pillars etc and removal of debris from site, complete all as specified and directed.

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), Complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc.1.50 Sqm n.exc 4 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc. 1.5 Sqm each , complete all as specified and directed.

Taking down shutters from the chowkats area exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.

Material and Labour for plain 2nd class soft wood solid straight chowkat and frame,wrought framed rebate on the solid,rounded or chamfered,put together with glue pinned at joints, complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Supply and fixing 30 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides , complete all as specified and directed.

Supply and fixing 35 mm 2nd class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed,complete all as specified and directed.

Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

Supply & fixing Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long, Complete all as specified and directed.

Supply and fixing 150 mm long extruded aluminium handles, cast type, anodised, complete all as specified and directed.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded section and fixed 100 mm long, Complete all as specified and directed.

Supply and fixing 100 mm long extruded aluminium handles, cast type, anodised, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Supply & fixing 2nd class soft wood Scantling clean sawn complete all as specified and directed

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate of mild steel, complete all as specified and directed.

Supply and fixing in repair Aluminium hat pegs, solid body, 125 mm to 175mm, complete all as specified and directed.

Supply and fixing 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles not exe 200 cu cm each, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removal from site, Complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples fixed complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples fixed in repairs , complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debris from site complete all as specified and directed.

Supply and fixing Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with hooks L type or J type or cranked hook bolts , in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed.

Supply and fixing Plain, galvanised, mild steel sheeting, 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, Complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring , and removal of debris from site, complete all as specified and directed.

Material and Labour for 6mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24x32x300mm spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be at a distance greater than 450mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to be interlocked between main runners at 600mm centre to centre from 1200x600mm modules cross Tee longer than 600mm modules to be framed by fittings 600mm long cross tee, perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19x19mm and 300mm long of white colour complete all as specified and directed.

Material and Labour for Rendering 15 mm thick in cement mortar (1:6) on fair faces of brick/concrete surfaces of walls finished even and smooth (without using extra cement) , complete all as specified and directed .

Material and Labour for Rendering 15 mm thick cement plaster on deteriorated wall surfaces in CM (1:4) finished even and smooth (without using extra cement) , complete all as specified and directed.

Material and Labour for three coats of white lime wash on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.

Material and Labour for two coats of white wash on walls including complete removal of existing treatment surfaces, complete all as specified and directed.

Material and Labour for two coats of distemper oil emulsion (any tint) over a coat of primer over a coat of putty 3 mm thick on new non asbestos sheet in wall including preparation of surfaces complete all as specified and directed.

Material and Labour for two coats of distemper oil emulsion (any tint) over a coat of putty 3 mm thick on wall on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Material and Labour for two coats of distemper oil emulsion (any tint) over a coat of primer over a coat of putty 3 mm thick on Ceiling on Non Asbestos fibre sheet including preparation of surfaces, complete all as specified and directed.

Material and Labour for two coats of weatherproof (Apex) exterior emulsion paint colour and tint as ordered in any pattern over a coat of primer on newly plastered surfaces of walls including preparation of plastered surfaces, complete all as specified and directed.

Material and Labour for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint), complete all as specified and directed.

Material and Labour for two coats of synthetic enamel paint (any tint) over a coat of pink primer including preparation of surfaces for new wooden surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed.

Material and Labour for one coat of synthetic enamel paint (any tint) on old decorated wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

Material and Labour for preparation of new surfaces of steel or iron surfaces of any desciption, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer,complete all as specified and directed.

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6), complete all as specified and directed.

Material and Labour for cutting chases in Brick wall, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chasses for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth, complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Supply & fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor with all fittings (such as bends, elbows, tee, short peaces, connectors, check nuts, diminishing pieces, caps and plugs, union etc.) of nominal bore of pipe dia 15 mm complete all as specified and directed.

Supply and fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor with all fittings (such as bends, elbows, tee, short peaces, connectors, check nuts, diminishing pieces, caps and plugs, union etc.) of nominal bore of pipe dia 20 mm complete all as specified and directed.

Material and Labour for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed.

Supply and fixing in repair 20 mm bore Stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting and dismantling existing tank and removing to store, complete all as specified and directed.

Supply and fixing in repair EWC vitreous China wash down water closet pan (pedestal pattern) white, including seat cover complete all as specified and directed.

Supply and fixing in repair for 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and including 32mm dia pipe for low level cistern flush pipe, complete all as specified and directed.

Supply and fixing in repair, Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe complete all as specified and directed.

Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply and fixing in repairs 15 mm bore dia pipe, bib taps, cast copper alloy chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repairs 15 mm bore dia pipe, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing in repair Vitreous China wash hand basin, white, flat back, size 550X400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or errecting stand, 32/40 mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper complete all as specified and directed.

Supply and fixing 15 mm bore dia pipe pillar taps,cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs brass chromium plated overhead pressure adjustable shower with revolving joints with shower arms 125mm long heavy casted body with all fittings, complete all as specified and directed.

Supply and fixing Grating dome 150mm dia with waste hole of PTMT (Min wt 100 gms), complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flanges complete all as specified and directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm,complete all as specified and directed.

Supply and fixing 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in repairs 50mm bore (sand cast), Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

Supply and fixing in repairs 100mm bore (sand cast), Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floor complete all as specified and directed.

Supply and fixing in repairs 100mm bore (sand cast), Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Supply and fixing in repairs 75mm bore (sand cast), Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floor, complete all as specified and directed.

Supply and fixing in repairs 75mm bore (sand cast), Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

Supply and fixing 100mm cast iron sanitary connection-short connection pipes of length upto 300mm, complete all as specified and directed.

Supply and fixing cast iron branch pieces, double (equal or un equal), ordinary or inverted (spigot or socket) or with parallel branches for 100mm bore fitted with oval access doors, complete all as specified and directed.

Supply and fixing cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore fitted with oval access doors, complete all as specified and directed.

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore fitted with oval access doors complete all as specified and directed.

Supply & fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore fitted with oval access doors, complete all as specified and directed .

Supply & fixing cast iron bends (any radius) with duck's foot or heel rest 100mm bore dia, complete all as specified and directed.

Supply & fixing cast iron bends (any radius) with duck's foot or heel rest 75mm bore dia, complete all as specified and directed.

Material and Labour for Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75mm bore complete all as specified and directed.

Supply & fixing cast iron cowls for 50mm bore pipe, complete all as specified and directed.

Material and Labour for extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint 100mm bore pipe complete all as specified and directed.

Material and Labour for extra over cast iron pipe and fitting if lead joint is provided in lieu of cement joint 75mm bore pipe complete all as specified and directed.

Material and Labour for 6mm thickness non-asbestos fibre cement building boards (medium density) fixed on wall with and including bonded mineral wool blanket slab,40mm thick one side covered with polythene based jute hessain cloth made from glass density 48 kg/cum fixed on existing wall with frame work made out of wooden fillets of size 40mm x 25 mm (2nd class softwood) on mineral wool. 6mm thick fibre cement building board shall be fixed with frame made of 2nd class softwood fillets of size 40 mm x 25mm as direced by Engr-in-Charge. Note : Rate quoted by contractor shall be inclusive of 6mm thick non-abestos fibre cement board, bonded mineral wool blanket slab 40mm thick and frame work both on mineral wool and top surface of fibre cement board.

Supply & fixing powder coated anodised aluminium frame for doors, windows, sliding window, ventilators with one or more rebates, doors shutters of hollow rectangular/ square sections including aluminum hinges 100 mm long with powder coated jointing cleats for fixing, complete all as specified and directed

Supply & fixing Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats,glazing clips,rubber neoprene packing,handles 2 nos in each door,hinges,anodised aluminium snap beading screws etc complete all as specified and directed.

Supply & fixing powder coated aluminium window and ventilator shutters,side hung type without sash,aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no ) suitable handle(1 no ) complete all as specified and directed.

Supply & fixing 5.5mm thick glass ordinary quality and glazing with oil putty in square exc. 0.5 sq. m in each pane complete all as specified and directed

Supply & fixing UPVC windows with following specification, Glass 5mm clear tough+ 12mm A. G + 5mm clear toughened, Profile - Mozart Premium, Colour-White, Drainage- Face, Reinforcement-standard, T-joints- Mechanical/V-welded, Bead- Default, Mesh - Pull down, Handle type- Cocksper handle, complete all as specified and directed

Material and Labour for 100 mm thick Cement Concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in floor finishes, complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, and removal of debris from site complete all as specified and directed.

Material and Labour for Vitrified ceramic tiles Light shade 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed In white or coloured cement to match the shade of tiles, laid over and including 15mm thick cement screed base in CM (1:6), complete all as specified and directed.

Material and Labour for Vitrified ceramic tiles Light shade 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed In white or coloured cement to match the shade of tiles, laid over and including 10mm thick Rendering in CM (1:4), complete all as specified and directed.

Material and Labour for Machine cut kota stone slab flooring 18-20 mm thick laid over and including 20mm thick cement screed base in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed.

Material and Labour for 20mm thick Granite(of any type) tiles as in floors machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including grinding and polishing types, complete all as specified and directed.

Supply & fixing in repairs wire netting galvanised steel wire 1.40 mm dia size of mesh 25 mm fixed with tinned tacks of wire staples, complete all as specified and directed.

Supply & fixing Aluminium (Extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters 700 mm and above in width and of weight not more than 35 Kilogram complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection, complete all as specified and directed.

Supply & fixing in repair Curtain rods 25 dia with PVC coating on hollow MS steel rods fancy type with brackets, corner & fancy types fineals, complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Material and Labour for Weather boarding of 2nd class soft wood ,clean Sawn,plain 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30mm laps and wrought both sides and edge shot and chamfered (on exposed edges) complete all as specified and directed.

Demolition of Reinforced Concrete of any description (reinforcement cut as required to facilitate demolition) and in any position complete all as specified and directed.

Material and Labour for RCC 1:2:4 type B-1 with 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on flat rough finished surfaces of concrete, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide on rough finished surfaces of concrete, complete all as specified and directed.

Supply & fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and Labour for machine pressed coloured concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry with mixture of white & grey cement in equal proportion and no pigment in floors complete all as specified and directed.

Material and Labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed.

Material and Labour for preparing surface of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil, complete all as specified and directed.

Material and Labour for Bees-wax polishing on Kota floor surface of any description including cleaning and preparing the surface, complete all as specified and directed.

Supply and fixing 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Material and Labour for Closing bolt holes, etc., in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.

Material and Labour for complete removal of existing treatment of external walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent and trading oil greasy spots complete including necessary scaffolding and applying two coats of weatherproof (Apex) exterior emulsion paint colour and tint as ordered in any pattern over and including one coat of primer etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching with original colour of wall, complete all as specified & directed.

Material and Labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

one 3 pin 6 Amps switch socket out let point on independent board

one 3 pin 6 Amps switch socket out let point on same board

Material and Labour for Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

Supply and fixing modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc complete as specified and directed.Make- Legrand/ Anchor/ Havells.

Supply and fixing Modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed. Make Legrand/ Anchor/ Havells.

Supply and fixing modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed. Make- Legrand/ Anchor/ Havells.

Supply and fixing Modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed Make Legrand/ Anchor/ Havells.

Supply and fixing modular step type two model fan regulator suitable for 120 watt 250 volts complete as specified and directed Make- Legrand/ Anchor/ Havells.

Material and labour for ceiling rose with three terminal as per relevant IS complete as specified and directed Make SSK/havells/legrand /Anchor

Supply and fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 16 watt luminaire complete all as specified approved and directed EIC.Make:- CG C&S ,Havells ,Crompton.

Supply and fixing recess mounting LED ultra slim 36w (2'x2') ceiling light with extruded aluminium housing and milky diffuser including suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed Make : C&S, Havells, Crompton, Bajaj

Supply and fixing mirror light sleek LED 10W mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer etc complete as specified and directed Make:- CG C&S ,Havells ,Crompton.

Supply and fixing Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser with 10 LED lamp etc complete as specified and directed Make:- CG C&S, Havells,Crompton.

Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed

Supply and fixing MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incoming & outgoing controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed. Make Legrand, Havells & Anchor.

Supply and fixing MCB triple pole ISI marked `C' series working on 240 volts 50HZ AC supply for incoming & out going controlling system of capaicty 40 Amps 10 KA breaking capacity etc all as specified and directed.Make Legrand, Havells & Anchor

Supply and fixing MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand, Havells & Anchor

Supply and fixing MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 63 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand, Havells & Anchor.

Supply and fixing MCCB's with fixed thermal and fixed magnetic setting model 125 Amps lcs=100 % lcu 4 pole 16 KA Ics 100% lcu 415 V 50 HZ complete all as specified and directed. Make- Legrand, Havells & Anchor.

Supply and fixing triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp C series, 10 KA breaking capacity including uding flush/surface mounting complete all as specified and directed. Make Legrand, Havells & Anchor

Supply and fixing sheet metal enclosure single pole and neutral with 3 pin earth metal plug and socket with one single pole MCB 20 A, 230 volts etc, complete as specified and directed Make- Legrand/Hager.

Material and Labour for sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size stove enamelled conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size as in repair, complete all as specified & directed.

4x6.0 sqmm + 1x6.0 sqmm earth wire

2x6.0sqmm + 1x6.0 sqmm earth wire

Material and Labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed.

Material and Labour for exhaust fan 5 star rating heavy duty AC single phase 230 volt 50 HZ of size 450 mm sweep and 900RPM complete with louvers shutters and connection with 3 core pvc insulated copper conductor cable of suitable size from ceiling rose to connector of fan and grouting of holding down bolt alongwith necessary PCC works and writing the MES No complete all as specified & directed.

Material and Labour for exhaust fan 5 star rating heavy duty AC single phase 230 volt 50 HZ of size 350 mm sweep and 900RPM with louvers shutters and connection with 3 core pvc insulated copper conductor cable of suitable size from ceiling rose to connector of fan and grouting of holding down bolt alongwith necessary PCC works and writing the MES No complete all as specified & directed.

M/s Jaipal Associates

M/S Abdul Ahad Rather

M/S MIR AND CO

M/S M B ENTERPRISES

M/S RATHER CONSTRUCTION CO

M/S BASHIR AND SONS

M/S MUBASHIR SHABIR WANI