Special repair to block No P-28 (660) and chain link fencing in sector B at Mil Stn Patiala under GE (S) Patiala

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc and fixing of chicken wire mesh where directed complete all as specified and directed. Note : WPC and chicken wire mesh will be measured and paid separately as supply only.

Supply only integral liquid water proofing compound complete all as specified and directed.

Supply only chicken wire mesh 22 gauge of size not more than 20X20mm complete all as specified and directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/ description from walls/ RCC surfaces/ ceiling/ chajjas/ roof projections etc with mechanical means/grinder complete all as specified and directed.

M&L for applying acrylic wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving next treatment etc complete all as specified and directed.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/ brush to external walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows as specified

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Dismantling floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M&L for Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified.

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), over 25 mm thick cement concrete 1:2:4 type B-0 complete all as specified and directed by Engr-in-Charge.

M&L for Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles 400x400x10 mm thick as in skirting in cement slurry over and including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed by Engineer in Charge.

M&L for Baroda Green marble, machine cut as in shelves/ steps/ landings/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified.

M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green/white mable as per pattern approved over & including screed of 20 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. The rate shall be inclusive of Baroda/white marble border also

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified .

S&F in repair vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified.

S&F 6mm thick looking mirror beveled edge fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish, etc.complete fixed in position all as specified and directed.

S&F PTMT 450mm long shelf for wash basin, fixed in position complete in all respect all as specified.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in repairs complete in all respect all as specified.

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete fixed in repairs.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections fixed in repairs complete all as specified and directed.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in repairs complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in repairs complete in all respect all as specified.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 fixed in repairs all as directed.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in repairs complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm fixed in repairs complete all as directed and specified.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Taking down of PVC water srorage tank of of 300 to 500 ltrs capacity as located on terrace of the building all as specified and directed.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified

PVC(HDPE) SWR, 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L cast iron multifloor/ floor/ nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts, bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed.

Taking down of existing CI pipe 100 mm bore and refixing the same after cleaning painting with 2 coats in any position complete all as specified and directed.

S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface complete all as specified and directed.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

S&F cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.

S&F CI Bends (any radius), for 100mm bore CI piipes complete all as specified.

S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

M&L for cast iron cowls of 100 mm dia complete all as specified and directed.

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as directed and specified.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100, complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147)

Precast PCC plain factory made tiles, ISI marked, 22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. on 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified.

M&L for hardcore of bricks obtained from demolition/ dismantling of brick work/brick tiles of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as directed by Engr-in-Charge and complete as specified.

PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

Dismantling of boarding of any type/size as in CB/ wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs. (Make KAFF/ Hettich)

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/ cup & saucer/ bottle/ multi purpose/ 2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

S&F Framed work such as grills, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Excavating in post holes (or similar holes) in soft / loose soil each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, removing surplus soil to a distance not exc 50 m and making good surface

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; incl flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work erected and fixed in position or embedding in PCC complete conforming to Fe-290 Gde E-165 all as specified and as directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Supplied and fixed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Chain link MS galvanisd fencing, size or type Approved by the engr-in-charge.

Mild steel screw bolts (machine made) 5mm to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 5cm long each bolt complete.

Mild steel round bars cut to length reqd incl bending hooks / ends as directed by Engineer incharge or welding for overlaps as in ties for fencing etc., conforming to Grade-I IS-432 (Part-1) or Fe-410-W (Grade E-250) Quality 'A' or Fe-290 (Grede-E-165) complete all as specified and as directed

Preparing ends of steel posts as in fencing and treated with coal tar or coal tar black paint area tarred exc 0.10 Sqm but not exc 0.50 Sqm each M&L complete.

Preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described width or girth not exc 10cm and M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

Cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in kerbs of any type, mud stops, copings , bed plated etc with slightly rounded or chamferred edges complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/ socket/ power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires, gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M&L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately). (Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth

All as per Sl item No 122 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No 122 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 122 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 2.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded stranded copper earth continuity conductor complete all as specified and directed.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified.

S&F Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified.

S&F Modular switch 1 way, 16 Amps, 1 module complete all as specified.

S&F Modular socket 5 pin 6 Amps, 2 module complete all as specified.

S&F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified.

S&F fan regulator modular type 1 module complete all as specified

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.

Supply and fix bell ding dong electronic complete all as specified and directed.

S&F Lamp holder with LED bulb 9 W incl flexible wire 0.5 Sqmm copper cable all as specified & directed.

Supply and fix tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity, 20 watt, 4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed.

Supply and fix Surface Mounted LED Bulk Head 10 Watt Luminaire with ABS Body & Polycarbonate Diffuser, IP54 inc connection with, with flexible wire 0.5 sqmm copper cable all as specified & directed.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Make : Indoasian, Havells, Schenider, Seimens, Legrand) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth.

S&F MCB, SPN, 240 Volt, 32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed.

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRls, stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia incl 4.0 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed.

Supply and fix exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm with louver complete all as specified and directed,

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways (one incoming three phase & four out goings three phase )for MCCB, ISOLATOR & MCB's comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 63 AMPS AC 415 VOLTS 10 KA IHLGSF063 =01 NO as incoming Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT/ Havells - CAT PART – DHDLVDRWGOFO04 or equivalent in Legrand/ ABB/ Indoasian optipro (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Buttar Construction Co.

Arneja Builders

Swami Engineers

m/s panchmukhi builders

M/S Mukesh Kumar Gupta

NORTON BUILDER

Vipin Kumar and Brother