CONSTRUCTION OF BOUNDARY WALL IRON GATE AND PROVIDING FURNITURE FIXTURE FOR DISTRICT INDUSTRIES AND COMMERCE CENTRE KAMRUP (METRO) OFFICE AT INDUSTRIAL ESTATE BAMUNIMAIDAM GUWAHATI 21

Amount

Construction of Boundary Wall- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil. P.C.C / R.C.C. / D.P.C. WORK

Providing and laying in positon cement concrete of specified grade excluding the cost of centering and shutttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

BRICK WORK- Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (b) In proportion 1:4.

SHUTTERING AND FORM WORK- Centering and shuttering including strutting, propping etc, and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars ,posts & strut

PLASTERING AND POINTING- 12 mm Cement plaster of mix a) In cement mortar 1:4

STEEL AND IRON WORK- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S.angle, C.C. blocks shall be paid separately)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Applying priming coats with primer of approved brand and manufacture, having low VOC( Volatile Organic Compound) content. With water thinable cement primer on wall surface having VOC content less than 50 grams/litre

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Furniture- GENERAL MANAGER'S TABLE - Model: HT 501-A, Main Table Size: 2200W x 800D x 780H MM………………………. Make: Featherlite

Functional Manager & Project Manager TABLE- Model: HT 531, Main Table Size: 1600W x 750D x 780H MM………………………….. Make: Featherlite

ASSISTANT MANAGER, Marketing, S.I and Head Assistant Table, Model: V-MT 1575, Size: 1500 W x 750 D x 750ht …………………….. Make: Featherlite

E O , Cashier, Account Table and Computer Section table, Model: V-MT 1275, Size: 1200 W x 750 D x 750ht ………………………. Make: Featherlite

JR ASSISTANT (Staff) TABLES, Model: V-MT 1275, Size: 1200 W x 750 D x 750ht……………………… Make: Featherlite

CONFERENCE TABLE Model: FST 42015, SIZE: 4200 x 1500 x 750 ht …………………………..

STORAGE- Model: Versaline Storage Unit ………………………… Make: Featherlite, VS 9075: Size: 900W x 450D x 750HT……………………. Make: Featherlite

FST 900210: Size: 900W x 450D x 2100HT…………………. Make: Featherlite

Steel Rack, Size: 900 x 457 x 1950 H………………………. Make: Featherlite

GENERAL MANAGER'S CHAIR- Model: Liberate HB…………………………… Make: Featherlite

GENERAL MANAGER'S VISITOR'S CHAIR. Model: Astro VA, Medium mesh back chair………………………… Make: Featherlite

Functional Manager & Project Manager & CONFERENCE HEAD'S CHAIR, Model: Astro HB, High mesh back chair…………………………….. Make: Featherlite

ASSISTANT MANAGER, Marketing, S.I, Conference and Head Assistant CHAIR, Model: Astro MB, Medium mesh back chair……………………………… Make: Featherlite

E O , Cashier, Account Table and Computer Section CHAIR, Model: Smart MB Fixed Arms, Medium mesh back chair……………………… Make: Featherlite

JR ASSISTANT Staff CHAIR, Model: Contact Project VA, Medium mesh back chair,………………… Make: Featherlite

VISITOR'S CHAIR- Model: Smart VA, Low mesh back chair,…………………. Make: Featherlite

SEMINAR CHAIR, MODEL: MAGNA WD, Plastic back,…………………… Make: Featherlite

SOFA- Model: E007, Leatherette / Fabric Sofa………………….. Make: Featherlite (a) Two seater

(b) Three Seater

Bruney Tandem, Three seater tandem, Metal perforated tandem………… Make: Featherlite

Center Table Oval Shape, Size: 1050L x 600 D x 450 Ht………………………. Make: Featherlite

Vertical Blinds Fitting charges Make: Nova

Vertical Blinds- Size: 1.90 W x 2.35 D m

Size: 1.60 W x 2.35 D m

Size: 1.20 W x 2.40 D m

MD. MUNNAF AHMED

M/S M.R ENTERPRISE