Supply, Installation and Commissioning of 1000LPH Reverse Osmosis Plant with Hot Cold Water Dispenser at Bus Stand

Amount

Labour charges for cutting open Cement Concrete road for laying water mains including cutting required width and depth after laying the pipe refilling charges etc.,(TWAD SOR 2023--24 / PG 311)

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and Delivery of Following Pipes and Specials including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification. 40 mm P.V.C Pipe 6Ksc (TWAD SOR 2023--24 / PG 19)

Lowering Of 40 mm dia (OD) PVC pipes and Specials in the trenches and Laying to Propper Grade and Allignment By Departmentalofficers (TWAD SOR 2023-24/ PG 280)

Supplying and erecting in position of following liters capacity Industrial Model 1000 Litres Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health. Organisation (WHO) Standards with following accessories.(TWAD SOR 2023-24/ PG 200) (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Supplying, Installation, testing and commissioning of stainless steel Water Dispenser complete with the following accessories as required:- a) Normal water storage capacity- 20 Ltr, Hot water storage capacity-5Ltr and Cold water storage capacity - 125 Ltr dispenser b)Taps -3 Nos c) Flow Rate : 75LPH d) With UV Lamp etc., complete complying with standard specification.

supply and delivery 1000 Ltrs stainless steel water storage tank low temprature application easy wash and material is also heat resistant and doesn't get affected when exposed to harmful radiations. Moreover, stainless steel tanks are less likely to crack, rust or freeze.

HK CONSTRUCTION (BID ID -1096511)

SMR TRADERS (BID ID -1095848)