DEMOLITION AND RE-CONSTRUCTION OF SMALL ARMS RANGE AT AF STN BAMRAULI

Amount

Lump sum price worked out by the contractor as per showm on drawing for Building Works as listed in Sch ‘A’ Part I.

Lump sum price worked out by the contractor for Internal Water Supply as listed in Sch 'A' Part II.

Lump sum price worked out by the contractor for Internal Electrification as listed in Sch 'A' Part III.

Lump sum price worked out by the contractor for Road / Path / Hardstanding as listed in Sch 'A' Part IV.

Lump sum price worked out by the contractor for Area Drainage as listed in Sch 'A' Part V.

Lump sum price worked out by the contractor for RCC Security Wall as listed in Sch 'A' Part VI.

Lump sum price worked out by the contractor for External Water Supply as listed in Sch 'A' Part VII.

Lump sum price worked out by the contractor for External Electrification as listed in Sch 'A' Part VIII.

Lump sum price worked out by the contractor for Site Clearance / Earth Work as listed in Sch 'A' Part IX.

Lump sum price worked out by the contractor for demolition and dismantling as listed in Sch 'A' Part II.

Price item wise worked out by the Contractor for Schedule `A' Part-X (rate against Srl No. 12.0 to 25.00 shall be quoted by the Contractor)

Supply & fixing metal flush box 8 module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply & fixing white modular cover plate with frame 8 module for modular switches and sockets complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron strip 32X6mm, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe light grade for earth lead protection pipe of suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1:3:6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1:2:4 type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge. NOTE: Earth lead wire and its protection pipe upto and including 15 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

All as per BOQ item No 14 but using galvanised earth wire 4mm all as and 15 dia GI pipe for earth lead protection complete all as specified and directed.

Supply, Installation & commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage capacity of 80 litre and nominal cooling capacity 40 litres per hour complete all as specified and as directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.

S&F copper wire PVC insulated 3 core multistranded of size 1.5 Sq. mm with FRLSH PVC insulated copper conductor, cable in surface/ recessed as required from Junction Box to Street light fittings complete all as specified and directed.

Supply and fixing light grade GI pipe bend shape 1.5m long (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts & washer with nuts duly grouted in wall or fixing on pole complete all as specified and directed.

S&F weather Proof thermo plastic (Polysterene) Cable Junction Box, having protection class IP-66 and of overall size 155mm x 210mm x 92mm (Approx) having metric knockouts on the wall, duly fixed with the pole with aluminium strip (25x3mm) clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (Complete with check nut) and including 1 No 30 Amps 4 Way cable connector and 1 No. 6 Amps SP MCB. Make:- Hensel / Spelsberg / Rittal / Gewis Note: During connecting the incoming and outgoing cables, the continuity of armour to be maintained by shoting them inside the box and earth continuity to be looped for LED fitting for grounding purpose.

S&F dimmer 2000 Watt capacity for LED flood light fitting, 230 Volt AC, complete all as specified and directed

S&F obstruction aviation LED light above 5 feet on the wall including pipe complete all as specified and directed

Supply, Installation, commisioning and testing LT panel board, conforming to CPRI specifications, 415 V, 50 Hz, AC supply, three phase and neutral, outdoor type (Kiosk) with apron of suitable size, factory made, fabricated with 3.15mm thick mild steel sheet (outer body), ISMC-75 base channels, duly powder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangements, dust and vermin proof, complete including suitable size lugs, glands. One number brass pad lock of Harison/Link, 50mm size, 4 levers and making connections, earthwork and PCC foundation complete comprising of the followings and specified here-in-after: - (i) Aluminium bus bar 100 Amps current rating capacity comprising of 4 aluminium strips of appropriate size provided with heat shrinkable sleeve not less than 1mm thick (ii) Cable alley for I/C 150 Amps and 03 outgoing feeders. Incomming: (a) MCCB 40 Amps, 16 KA 4 Pole, 415 Volt, adjustable type-01 No. (b) Meter module digital volt and ampere meter of appropriate size with accessories-01 No. Outgoing: (a) MCP TP 32 Amp, 415 Volt, 50 Hz-01 No. (b) MCB SP 6 Amp-04 Nos. Note: Cable glands should be provided for all incoming / outgoing connection.

S&F Galvanised, razer wire wire 2.24 mm dia of wire 20x15 mm barbs at 37 mm spacings and straining & fixing to any type of standard rails straining bolts incl securing or tying at crossing with and provn of GI mild steel wire, staples or steel pins etc as directed complete.

S&F concertina coil 1050mm dia (in streatched position) hot dip galvanised steel wire coated with CRL anti corrosive paint, making diamond shape with the help of dove tail clip (18 SWG) fixed over razor wire with angle iron. The concertina coil is to be fixed with razor wire with the help of hog rings (14 SWG) complete all as specified and directed.

Deduct Schedule of Credit

DEORA ELECTRIC WORKS

VEE SONS BUILDERS PVT LTD

POOJA ENTERPRISES

Ashirwad Contractor and Supplier