PROVN OF 03 X HIGH MAST LIGHTS AT 54 INF DIV SIG REGT (A), PROVN OF 16 X SECURITY LIGHTS WITH POLES AND CONNECTED ITEMS FOR 125 (TA) AND PROVN OF UPGRADATION OF EXTERNAL WATER SUPPLY AT 60 ASC (SUP) TYPE G UNDER AGE E/M NO II OF GE (U) SECUNDERABAD

Amount

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in deep and getting out in Hard/Dense soil for laying of cables etc.

Excavating in trenches, not exceeding 1.5 mtr wide and depth exceeding 1.5 mtr deep and not exceeding 3 mtr deep for excavation of poles and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil.

Removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the straight point

Material and labour for sand cushioning using dry and clean sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. Note : Punning down thickness shall be measured and paid.

Supply & Laying bricks using sub class ‘B’ bricks (old size) for cable protection laid flat and dry in trenches over cable perpendicular to direction of cable, complete all as specified and directed by Engr-in-Charge.

Supply and lay XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 10 Sqmm, 2 Core incl taking out complete all as specified and directed.

Supply and laying in trenches on walls/ under floors/ through GI protection pipe etc, connecting by using lugs and testing, LT electric Cable XLPE insulated, galvanised steel strip or wire armoured power cable (heavy duty) with stranded Aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 core connected and tested complete all as specified and directed. (Make havells/gloster/kei/Nicco)

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 METRE long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying Two Coats of Black Bituminous Paint Internally and Externally upto Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of Aluminium Primer (Externally from Top of Coping),3 Nos 30 cm wide circular band with black and yellow paint starting starting from plinth level at a gap of 30 cm in between two bands including Writing MES Pole No. with Synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. Note :- (i) Pole have provision for two nos hole of suitable dia and at suitable position for passing of street light connecting wire from JB to street light (ii) Excavation and PCC will be measured and paid separately.

Material and labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, mass concrete to pole all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping to pole including form work all as specified and directed.

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 60 Watts with suitable drivers etc , fixing to pole complete all as specified and directed. Make:- Make: Bajaj Cat No.BRTFG 90W LED V3 or Havells Cat No. ENDURAPEARLPLUSSL60WLED757SASYTOPC or Wipro cat No. LR02-671-XXX-57- G/ Luker Cat no: LST -60 / Surya cat No : SLEUL 60 WIP66 LXN Notes :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers. (iii) Surge protection of the drive should be 10 KV or equivalent model in Bajaj / Philips/havells/luker or Wipro.

Fabrication and installation of GI pipe bracket made of medium grade tubing of size 40 mm dia, duly bended by hot forgoing after filling of sand, length 1.20 mtr including providing two pair of MS flat strip clamps 40 mm x 4 mm with GI bolts nuts and washer complete all as specified and directed

S&F twisted copper cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 sqmm3 core from Junction Box to Street light passes through inside the steel pole , complete all as specified and directed. Make :- Havells/Nicco/Plaza/Finolex.

S & F hot press moulded SMC junction / terminal box of size with internal dimensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable size of cable lugs/glands, fixed on pole by means of 2 SETS OF clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable one all as specified and as directed.Make: Hensel/Syntex/C&S/nyptune

M&L for Pipe galvanised (Light grade) 40 mm bore dia, laid in trenches or fixed to pole with necessary MS Clamps, bolts, nuts, washers etc complete as in protection of UG cable complete all as specified and directed.

Making horizontal bore hole under road crossing of size 60mm dia bore at depth not less than 0.7 mtr below ground level for passing of UG cable protection pipe of dia 40 mm using machinery equipments complete without damaging the surface at suitable depth for site requirment complete all as specified and directed.Note : GI pipe will be measured and paid separately under relevant items.

Supply, errect, test and commissioning of High Mast system consisting of single/double section mast shaft, made out of hot dip galvanised steel structure 12 Mtrs long including head frame, three wire suspension , steel wire rope 6mm dia (7/10 construction) double drum winch, galvanised lantern carriage arrangement suitable for and including 9 Nos 1X200W LED lights, 01 number LED type aviation obstruction light including lamp, lightning final etc, with integral power tool installed inside base compartment for operation including accessories such as suitable for wind velocity as per IS 875 Part 3, including/confirming to the following : (Make of mast: philips/bajaj/surya/crompton /HAVELLS/luker)

(a) Foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates complete all as directed by Engr-in-Charge. (b) The light luminaries shall be 1X200 watt LED lamp - 09 nos , non-integral asymmetric type flood light with die cast aluminium housing with IP 65 protection flood light fittings. (MAKE : HAVELLS Model No JETAVALOURFL200WLED757 PINTNBLTG/ PHILIPS MODEL NUMBER: BVP483 LED235 CW SWB PSU GR/ BAJAJ MODEL NUMBER :GLEAMF 240WHSYPC / WIPRO MODEL NUMBER : LF20-272-060-57-G2/luker Model No LFLHL200 (c) The Aviation obstruction light LED type SIMILER TO XGP400 IXLED-K2/RD 240 VOLT OF MAKE PHILIPS / BGAV 302 LED OF BAJAJ/ SLE AL 54 LDR -SEN IP 65 OF SURYA / GLN 704 OF CG/ EQUIVALENT FROM PHILIPS/HAVELLS/Luker

(d) Design and casting of suitable shallow foundation with M-25 design mix concrete for high mash considering the safe soil bearing capacity of soil as 10T/Sqm at min1.2 meters depth / as recomended by manufacturer , How ever the soil bearing capacity be checked/ confirmed as per site condition and got approved by the GE before commencement of work. (e)Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification . GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc (1:2:4 , B1) cover of 300x300 mm complete all as specified and directed make ASHLOK/INDELEC/JMV/TERCEL/TRUE POWER - 4 nos . ( two for mast and two for control panel)

(f) LT FEEDER PILLAR BOX BOTH SIDE OPENABLE with projected Gable roof for rain water protection,manufactured by a CPRI approved Manu-facturer Dust and Vermin Proof , suitable for 440 Volt 3 Phase 4 Wire System made out of 3.00 mm thick CRCA Sheet of size .70MX.70MX.30M and built upon Rigid Frame Work having Front and Rear hinged double shutter Doors with Neoprene Rubber Gasket, Epoxy Powder Coated including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X6mm Mild Steel Angle Iron Frame and 600mm above the Normal Ground Level comp -lete with PCC Foundation in Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) and Test-ing after Installation complete all as specified and comprising of the following :– (for controlling of high mast light)

Note : (i) The contractor shall procure the high mash with all fittings and accessories directly from manufactorers. (ii) The installation fittings and accessories shall be gote done under the supervision of manufacturer and as per manufacturers instructions and approved by GE. (iii) PV and Test certificate for each and every item related to High mast system to be produced. (iv) necessary approval must be taken regarding details technical specificatio and foundation drawing of high mast light before placing order to the company. (v) Testing for Design mix to be got done from approved labarotory , cost for the same deemed include in the quoted rate.

S&F steel water tubing, medium grade, galvanised including all fittings, such as bends, reducer, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc. and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches / fixed on walls / laid on floors etc, also for cutting, screwing and waste and for making forged bends on piping as required, all as specified and directed for the following sizes, including taking out old pipe line. Make : JINDAL/NATIONAL/BHARAT :-

80 mm dia pipe

50 mm dia pipe

40 mm dia pipe

25 mm dia pipe

20 mm dia pipe

S&F Gun metal, globe or gate valve, with iron wheel head, screwed both ends internally, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, suitable for pipe including all jointing materials and fixed, complete, all as specified and directed for the following sizes, including taking out old one. Make : ZULOTO/KARTAR/BIR/SIR :-

50 mm dia

40 mm dia

25 mm dia

20 mm dia

M&L for Construction of new PCC solid Masonry valve chamber of size 1000 X 1000 X 1000 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick 150 mm wide off sets around over 100 mm thick hard core, 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

Cutting the existing road straight by manual, depth not less than 0.75 meter and width as required for pipes up to 300 mm dia and refill the same with excavated soil up to 80 % road portion and 20 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed.

S&F connecting and testing of Cast Iron sluice valves 80mm dia flanged ends stem of SS (AISI410) & Bronze (Gun Metal) working parts IS : 14846 both ends flanged with clamps and check nuts, operating wheel etc, non rising type K504, class PN 1.6 including jointing materials connecting and testing complete all as specified and directed.

M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, for passing of GI pipe of 50/80 mm dia in any length including jointing materials suitable for supplying water and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed. Note : (i) Pipe will be measured & paid seperately under relevant item. (ii) Quoted rate is deemed to include for any permission required from local authorities for carrying out the work.

Sri Balaji Enterprises

POWER CONSTRUCTION COMPANY

sandhya enterprises

bethelenterprises

Sri Associates

DPS sales and services india

omsai thermax engineers

SIRITEL SYSTEMS PRIVATE LIMITED

Electricals India

STANDARD AGENCIES