MAINT/SERVICING AND REPAIRS OF DG SETS AND OTHER MISCELLANEOUS WORKS UNDER AGE E/M-II OF GE(SOUTH) MEERUT

Amount

Material and labour for servicing of DG set of capacity 40 KVA make - Cummins installed at MIRoom HQ 49 Bde Bhagat Line , complete with replacement of unsv fuel filter, oil filter, draining out old E/ oil and Coolant including cleaning of oil sump and radiator by applying water pressur inside the radiator, radiator inlet/ outlet hose pipes, fan velt complete with the satisfaction of Engr-in- Charge . All connected items such as fuel filter , oil filter , Coolant/ E/Oil , fan belt shall be supply and paid under respective items .

Supply onely fuel filter

Supply only lub oil filter

Supply only radiator fan belt.

Supply only radiator hose pipe inlet and outlet with SS adjustable clamp.

Supply only flexible fuel supply pipe filter to FIP.

Supply only alternator fan belt.

Supply only coolant for DG set.

Supply only engine oil grade 15w40 as recommanded by OEM.

Material and labour for servicing of DG set of capacity 62.5 KVA Make - Kirloskar. complete with replacement of unsv fuel filter, oil filter, draining out old E/ oil and Coolant including cleaning of oil sump and radiator by applying reverse water pressur inside the radiator, radiator inlet/ outlet hose pipes, fan velt complete with the satisfaction of Engr-in- Charge . All connected items such as fuel filter , oil filter , Coolant/ E/Oil , fan belt shall be paid as supply onely under respecctive items .

Supply only fuel Filter

Supply only lub oil filter

Supply only radiator fan belt.

Supply only radiator hose pipe inlet and outlet with SS adjustable clamp.

Supply only flexible fuel supply pipe filter to FIP.

Supply only alternator fan belt.

Servicing , testing and operating the OHT crane of capacity 2.0 to 10.0 ton including complete electronic system by OEM (M/s Pull Mech) technical team to cheking all movement system left right , Up down and forward backward complete with the satisfection of user and all as directed Engr-in- Charge.

Taking out fuel injector pump assembly from DG set of capacity 62.5 KVA Make- Kirloskar and carrying to the authorised Wk Sp for repair and calibration including replacement of minor part like washer , bolt, gasket as required at site and refixing the same including testing with the satisfaction of Engr-in- Charge.

Taking out fuel injector pump assembly from DG set of capacity 40 KVA Make Cummins and carrying to the authorised Wk Sp for repair and calibration including replacement of minor part like washer , bolt, gasket as required at site and refixing the same including testing with the satisfaction of Engr-in- Charge.

Taking out self starter 12 Volt from DG set and carrying to the authorised Wk Sp for repair and rewinding including replacement of pinion and teeth ,carbon bush set with holder solenoid switch and minor part like washer , bolt as required at site and refixing the same including testing with the satisfaction of Engr-in- Charge.

Supply and fixing in replacement of copper lead 1.0 Mtr long for battery with brass clamp one end and brass O clamp at other end with nuts and bolts all as directed by Engr-in- Charge.

Supply and fixing in relpacement of battery 12 Volt 150 AH maintenance free Make- Exide, Amaron, Amco or equivalent make as specified in PS.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI strip 32x6mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s/ Machinery etc including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Material & labour in replacement of GI strip of size 32 x 6 mm fixing with suitable size of GI nut and bolt to the plant machinery / panel incuding making / drilling holes complete all as specified and directed at site.

Material & labour for PVC insulated copper conductor multi stranded of size 6.0 Sqmm nominal cross sectional area single core cable , 1100 Volts grade 240 volts in and incl PVC conduit 20 mm dia medium grade fixing on wall / floor connected to machine and common earth duly with suitable size of lugs and nut / bolts complete all as specified & directed at site.

Supply and laying rubber insulating mating 19mm thick of size 2.0x1.0 mtr for anti shocking to operating electrical eqpt/ plant or machinery complete all as directed by by Engr-in- Charge.

Supply only first aid kit box made out of wooden board 12mm thick as per sample with painting in white colour,including writing " FIRST AID" in red colour complete with medicine like- PCM tab, Ibuprofen tab, Cotton bandage etc as precribed by Physician complete all as directed by Engr-in- charge.

Material and Labour for replacement of galvanised iron steel tube medium grade with all fitting such as Tee, bend, elbow, sockets laid in ground or fixed on wall of size 25mm complete all as specifed and directed . Make- TATA /JINDAL/ SURYA or equivalent make as specified in PS.

Material and Labour for replacement of galvanised iron steel tube medium grade with all fitting such as Tee, bend, elbow, sockets laid in ground or fixed on wall of size 20mm complete all as specifed and directed . Make- TATA / JINDAL/ SURYA or equivalent make as specified in PS.

Material and Labour for replacement of rotational moulded polythylene water storage tank ( Cylindrical vertical with closed top ) of capacity 500 ltrs hoisted and fixed in positionall as specified in SSR-I complete in all respect or as directed at site.

Material and Labour for replacement of gun metal gate valve with iron wheel head , screwed both ends for iron pipe of size 20mm complete all as specified and as directed. Make- Leader /Zoloto or equivalent make as specified in PS.

Material and Labour for replacement of bib taps , cast iron screws for iron pipe and fixe of size 15mm complete all as specifed and directed..

Material and Labour for replacement of ball brass valves, high pressure with polythene float and flynut complete, screws for iron pipe of size 20mm dia complete all as specified and directed .

Material and Labour for drilling in cast iron water mains ( in position ) for branch connection of size 20mm dia complete in all respect and as directed.

Material and Labour for cutting cast iron pipe in position for insertion of tees/ braches of size 80mm dia complete all as specified and directed .

Material and Labour for cast iron pipe with flanged ends, centrifugally cast , class A, in any length laid in trenches of size 80mm dia complete all as directed.

Taking out carefully unserviceable submersible pump from sewage sump well 25 feet deep by disconnecting of all pipe line connection by means of chain pulley and tepoy stand upto capacity of pump 5.0 HP pump complete all as specified and directed by Engr- in- Charge.

Material and labour to repair the unserviceable submersible pump three phase 415 Volt of capacity 5.0 HP by recognised/ auth workshop ,segregate the pump and motor separately removing old burnt winding wire cleaning the slotes and rewinding of submersible motor with PVC insulated copper conductor of existing gauge and turns including insulating material like, paper ,sleeves and varnishing complete reset the pump and motor with testing on full load to achieve the efficiency of pump for the satisfection of Engr-in-Charge.

Ball bearing suitable size for 5.0 HP pump motor including fixing complete with nuts and bolt as required and all as directed . Make- TATA/ NBC/ SKF or equivalent make as specified in PS.

Lowering the submersible pump carefully in sewage sump well 25 feet deep and connecting all pipe line connection with the help of chain pulley and tepoy stand upto capacity of pump 5.0 HP including testing complete all as directed at site.

Disconnecting and dismanteling unserviceable centrifugal pump set with motor electric drive 3 phase 415 volt 25.0 HP and transportation to auth / recognised workshop. Segregation the centrifugal pump and motor.Removing the existing copper burnt wire, cleaning the slots thoroughly and rewinding the motor of capacity 25.0 HP with supper enameled copper conductor of existing gauge and turns including insulating material like, insulating paper , sleeves and varnishing complete reset the pump and motor with testing on full load to achieve the efficiency of pump for the satisfection of Engr-in-Charge. ( Note- The copper winding wire will be measured and paid under respective item).

Disconnecting and dismanteling of unserviceable induction motor ( Air blower make- Usha) electric driven 3 phase 415 volt 15.0 HP and transportation to auth / recognised workshop motor for rewinding after removing the existing copper burnt wire, cleaning the slots thoroughly and rewinding the motor of capacity 15.0 HP with supper enameled copper conductor of existing gauge and turns including insulating material like, insulating paper , sleeves and varnishing complete reset the pump and motor with testing on full load to achieve the efficiency of pump for the satisfection of Engr-in-Charge. ( Note- The copper winding wire will be measured and paid under respective item).

Repairing of centrifugal pump of capacity 25.0 HP , opening the pump and shaft and separetely carry out the lathe work by metalling to shaft , turning,finishing and polishing complete and replacement of unsv oil seal, minor part like nuts, bolts and washer deemed to be inclusive in the rate quoted.

Repairing of Air blower coupled with induction motor 15.0 HP , opening the blower segerigate the unsv parts and replacemet of unseviceable teath gears including lathe work by metalling to shaft , turning,finishing and polishing complete and replacement of unsv oil seal refilling the blower oil up to level mark , minor part like nuts, bolts and washer deemed to be inclusive in the rate quoted.

Supply only super enamel copper conductor for rewinding of motor any capacity complete all as specified and directed.

Replacement of motor / pump ball bearing of capacity 25.0 HP pump of existing size all as directed . Make- TATA,/ NBC/ SKF or equivalent make as specified in PS.

Supply and fixing in replacement of pressure gauge heavy duty metallic body in sewage treatment plants of range-0 to 7Kg / Sq Cm complete all as specified and directed.

Supply and fix in replcement of sluice valve butterfly type flange end both side heavy duty of size 100mm bore ISI mark complete with nuts, bolts and washer complete all as specified and directed at site. Make- Zoloto / Leader or equivalent make as specified in PS.

Supply and fix in replcement of sluice valve butterfly type flange end both side heavy duty of size 80 mm bore ISI mark complete with nuts, bolts and washer complete all as specified and directed at site. Make- Zoloto / Leader or equivalent make as specified in PS.

Supply and fix in replacement of PAC dosing pump electro magnetic drive less moving parts,Max flow rate 0-6 Ltr / Hrs with pressure 3.5 Kg/Cm2 single phase AC , 230 Volt 50 Hz, Suction lift up to 1.5 mtr water max , flow adjusment o to 100%

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 50 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and fix in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting, including matching the surface with existing all as specified and directed by EIC.

Supply and installed in replacement of LED Sensor light fitting 1x45 Watt luminaries colour temprature 5700 K pressure die cast aluminium housing comprising high power LEDs enclosed with lens embedded PC cover with LED driver complete IP 65 protection. : Make:- Syska model No-SSK-ST-45W-S-5700K.

Supply and fix in repair,DOL starter model MK1 (8536) three phase 415 volt 50 Hz AC, relay range 11-18 (A) suitable for 7.5 HP electric driven motor at sewage plants.

Supply and fix in repair,fully autometic Star Delta Starter model MU 2 SASD ( with MU relay)Starter Model 8536 three phase 415 volt 50 Hz AC suitable for 30 HP electric driven motor at sewage plants.

Supply and fix in repair, OFF load change over switch with handle 4 pole 415 Volt 50 Hz 200 Amps AC supply complete with dismantling old unsv and complete all as specified and directed . Make- Havells

Supply and fix in repair, MCCB 4 pole 415 Volt AC 50 Hz 160 Amps 25 KA (F2) complete with dismantling old unsv all as directed . Make- Indo Asian

Supply and fix in repair foot valve 100mm dia plastic heavy duty with one end threeded as per sample complete all as specified and directed.

Supply and fix in repair power contactor model MU 2 HSN code 8536,415 volt 50 Hz three wire suitable for 25 HP motor complete all as directed .Make- LT (LK)

Supply and fix in repair PVC heavy duty flexible pipe 100mm dia complete all as directed as per sample complete all as specified and directed.

Supply and fix in repair PVC heavy duty flexible pipe 80mm dia complete all as directed as per sample complete all as specified and directed.

Supply and fix in repair PVC section heavy duty flexible pipe 65mm dia complete all as directed as per sample complete all as specified and directed.

Material and labour in replacement of air deffusers in STP MBBR/ Equalization / Sludge tanks of size 25mm dia PVC heavy duty tread type complete as per sample or as directed.

Material and labour in replacement of moving bed MBBR filter floating media ring type plain surface area > 80 sqm / cum complete all as specified and directed.

Labour only including T&P for cleaning out of sludge holding tank after pumping out all fluids and taking out solid sludge deposited inside the tank of plant capacity 200 / 400/500/700 KLD complete all as specified and direcred .

Labour only includiing T&P for cleaning out of equalization tank after pump out all fluids and taking out solid sludge deposited in side the tank by mechanically of plant capacity 400 / 500 KLD complete with the satisfection of Engr-in- Charge.

Labour only includiing T&P for cleaning out of treated water tank after pump out all water and taking out all solid / sludge deposited in side the tank by mechanical of capacity 200/400/500 KLD complete with the satisfection of Engr-in- Charge.

Labour only includiing T&P for cleaning out of oil and grease chamber after drainig out all water and taking out of solid / sludge deposited in side the tank by mechanical of capacity 200/400/500 KLD complete with the satisfection of Engr-in- Charge.

Labour only includiing T&P for cleaning out of MBBR tank after drainig out all water and taking out of solid / sludge deposited in side the tank segregate the MBBR media tank of capacity 200/400/500 KLD complete with the satisfection of Engr-in- Charge.

Skyline Encon

Jain Traders