COMPREHENSIVE MAINTENANCE TO CERTAIN BLDG UNDER AGE B R III OF GE (SOUTH) MEERUT CANTT

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed

M&L for brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No 02 here-in-before but except bricks

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone agg) 25 mm thick for Sub base flooring all as specified and directed.

Material & labour for non - skid coloured ceramic tiles 6 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

Material & labour for non-skid coloured ceramic tiles 6 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

S&F Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete, all as specified

M&L for vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of floor tiles. Complete all as specified and directed

M&L for vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in skirting/wall etc, set and jointed i and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and as directed.

M&L for vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc set and jointednin neat cement slurry and pointed in white or coloured cement to match over in floor over and including 15mm thick cement screed bed of CM (1:6) complete, all as specified

M&L for vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in skirting etc set and jointednin neat cement slurry and pointed in white or coloured cement to match over in floor over and including 10mm thick plaster in CM(1:4) joint free with grout of matching shade and dismantiling of old wall tiles complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

M & L for Udaipur green stone not less than 16 mm thick factory made bull nosed, pre polished (table rubbed and polished) as in jambs, window cill, cooking plateform and the like etc over screed bed 15 mm thick in CM 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone and making hole for gas pipe complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18 - 22mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.00 sqm in each complete all as specified and directed.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing complete all as specified and directed. Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.

S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

M&L for factory made gauged shutter shall be made out of anglw iron 35x35x5mm and 25x25x5mm and 1.5 mm thick, 10mm square bards grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floor spring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional complete all as specified and directed

S & F 10-12mm thick (Clear/ Frosted Acid wash) toughened Polish glass (meeting IS 2553 part 1 and EN-12150-1:2015) as in Frameless glass shower cubicles/partitions with Wall to wall enclosure with one end fixed glass and openable hinged/sliding door fixed with wall Coloured/transparent finished Edges (As approved by GE) including Brass hardware, door stoppers, wall to glass hinge, glass to glass hinge, wall to glass connector, floor clamp, stabilizer rod, knob, plastic parts, roller, floor guide, handles, wall brackets, floor bracket, top/bottom sliding track, L-clamps, profile strips with chrome finish and mirror finish stabilizer bar & rust Free Screws to make functional complete all as specified and directed.

M& L for 100mm size Extruded Aluminium alloy handles, fabricated type anodized fixed with ss screw complete all as specified.

Supply & fix 150 mm size Extruded Aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and directed.

S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long.all as specified & directed

S&F aluminium sliding bolt 250 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F medium weight butt hinges 100mm in size complete all as specified and directed.

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde E 165 complete all as specified and directed.

M&L for Powder coated aluminium door shutters without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed.

M&L for Powder coated aluminium window side hunge type with sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F false ceiling of Elegant Tile made of perforated cement fiber composite 595x595/295X1195/595X 1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 10 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to cntre complete all as specified and directed.

S&F seamless calcium silicate ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fiber fixed to the ceiling section with 25mm long self drilling and tapping screws having phillipshead with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially for mulated jointing compound and 48mm wide fiber tape to provided seamless finish

S&F accoustic wall panelling of Elegant Fabric tile made of perforated cement fibre composite 600x600/600x1200x5mm with square edge density 1050 kg/m2 covered with fabric on the front side and Accoustics fiber on the back side, water resistant and fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with aluminium H profile non GI suds 600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flange 15 & 50mm fully knurled giving it high strength, hot dipped galvanised steel with 120 GSM zinc coating specially desgined for accoustic vibration management and long life with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15060-2002 for excellent results complete as per manufacturer's instructions and as directed.

Providing and fixing suitable size wooden edge profile for treads/risers/corners etc complete of above mentioned approved manufacturers (As in item No 50 above)

(a) Profile for end locking

(b) Profile for stop noising

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F as in Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. in each pane complete all as specified and directed.

S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed.

S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified and directed.

M&L in repair 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including hinges and necessary fittings complete all as specified and directed.

S&F 100 mm long Stainless Steel glossy finish handles with SS screw, for cabnit shutter complete all as specified and as directed.

S & F 30mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutter each shutter width one half of length of window with following specification including making good to adjacent surfaces complete all as specified and directed. (a) Window frame of cross section of not less than 95mmx35mmx1.5mm thick (b) Three way track with sliding shutter of cross section of not less than 90mmx 30mmx1.1mm thick (c) Sliding shutter frame of cross section of not less than 40x18x1mm thick (d) Aluminium glazing strip size 18.2 x 16.66mm (e) S&F 5.5mm thick black glass (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter roller 1 nos (h) Two nos best quality sliding roller per shutter j) SS wire cloth 56mm with average aparture 1.4mm for one shutter (k) Fixing screws for frame 6 nos for each window complete all as specified and as directed

S&F powder coated anodised aluminium Ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick pin headed glass complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed

S&F for Stainless steel Hydraullic hinges 180 degree fold fixed with ss screw size as per ground requirment complete all as specified. (piano)

M&L for 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggrgate) as in plinth protection, path etc finished the surface even & fair complete all as specified

S&F in repair door closer hydraulically regulated cast iron body designation no 3 universal type suitable for door shutter of 851to 1000mm in with and weight between 61 to 80 kg of aluminium (die cast ) body complete all as specified and directed.

Taking down cement or lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

M & L for applying 10 mm thick rendering in CM 1:6 on brick / concrete surfaces of walls finished even and smooth without using extra cement, complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh as per approved quality before plastering on ceiling complete all as specified & directed.

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and smooth without using extra cement using water proofing compound @ 200ml/per bag of 50 kg cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly

M&L for preparation of new plastered surface of walls complete all as specified & directed.

M&L for preparation of old surface of walls/existing treatment by complete removal of existing treatment by mechanical means complete all as specified and directed.complete all as specified & directed.

M&L for applying 1 coat of primer complete all as specified and directed.

M&L for applying Two coat of OBD complete all as specified and directed

Material & labour for applying one coat of cement base paint complete all as specified directed.

M&L for preparing plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for preparing plastered old surfaces on ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed.

M&L for cutting chases, pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

All as per Sl Item No.76 here-in-before but 20 mm bore pipe.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling with proper clips and other required fittings and fixings or laying in floors complete all as specified and directed,

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling with proper clips and other required fittings and fixings or laying in floors complete all as specified and directed.

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete.

S&F triple layer, white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and complete all as specified.

S&F 20 mm dia ball PTMT valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.

S&F in repair chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified

S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed by Engineer-in-Charge. Make : Parry ware/CERA/Hind Ware

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed by Engineer-in-Charge. Make Parryware/CERA/Hindware

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F PVC(SWR) multy-floor trap, 75mm bore, plain with grating including jointing with solvent cement.

S&F PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement.

Supply & fix PVC connections of 600mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm in repair

S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed

S&F in repair CP brass soap dish complete all as specified

Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl all as specified

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified

S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022

S&F in repair 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

Supply & fix 50 mm wide rubber beading for doors of required size complete all as specified & directed.

S&F stainless in repair steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed

S & F in repair 25mm dia Stainless steel decorated curtain rod with braket and ring/side knob complete all as specified and directed.

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 all as specified

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long (for draining out the water) all as directed by engineer-in-Charge

M & L for cutting of bushes small trees (Peepal small plants or any other plant etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 200ml/per 50 kg cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) all as specified and directed.

Supply only liquid water proofing compound

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed. Note :- The water proofing treatment work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical respresentative.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work

M & L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mesh 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position as directed by Engr in-charge.

S&F in repair for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W (Gde?E- 250)complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes; framed guard bars; barred iron doors; ladders, steel staircase; framed balusters; walk ways; railings; framework of water tanks by using angle iron, mild steel tubes/hollow mild steel sections and MS chequered plates etc complete all as specified and directed.

Demolition of reinforced cement concrete n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

M&L for in 2mm thick fiber glass reinforced transulant plain sheet fixed with and incl catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed

M&L for PCC 1:3:6 type C-0 (using 12.5 mm greded agg) for hold fast, backfilling etc for pressed steel frame etc complete all as specified and directed.

S&F for lnsulated PVC Wall Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 12 mm including Dismantling of boarding, any description, fixed in any position with nailscomplete complete all as specified and directed.

Material and labour for cleaning water tanks 500 ltrs capacity, cleaning and removing all scales and dirt etc from tanks and tank mouth of circulating pipe including disconnecting, setting side ( or lowering/ hoisting if required), reconnecting and replacing union/GI nipple etc if required complete all as specified and directed.

Demolition of cement concrete of any descriptionand in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified & directed.

S&F in repair steel lid covers with spikes and having screw fixing system to the old/new water tanks 500/1000ltr capacity including making neccesary fittings/fixtures arrangements for removal of old lid and fixing new one complete all as pecified and directed.

M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick glass all fixed to frame complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 2mm thick Fibre glass reinforced translucent corrugated /plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, floor mounted water closet with cistern white including connecting to trap and to flush pipe, anti syphonage pie etc complete fixing to wall with bolts all as specified and directed . Make : hindware CAT No 20089 (S-10) and 21038 or techno commercially equivalent in Parryware or Jaquar.

S&F in repair chromium plated Hand shower (Health faucet) with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed Make : Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware

S&F 4-5mm thick ACP (Aluminium composite panel) sheet for exterior cladding including frame work as per site requirementss. (Note : The colour will be finalised by Engr-in-Charge)

Please Enable Macros to View BoQ information