REPAIR TO AC CGI SHEET ROOF EVES BOARD FALSE CEILLING AND OTHER CONNECTED WORKS INCLUDING INTERNAL ELECTRIFICATION IN DOMESTIC AREA AT AFS PATHANKOT

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.

M&L brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 all as specified.

All as per item above but except bricks

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement as directed , all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Rendering dubbing coat over damaged irregular surface of patches at colms,chajjas,canopy and soffits, roof projections, ceiling facia etc using GI chikrn mess of size 0.25mm thick and 20 mm aperature fixed with nails including necessary scaffolding arrangement as required at site average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emultion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal (Fiber glass reinforced crack filling compound) & up to 10mm by using textured crack filler (Acrylic crack filler with a grainy texture).Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and dust pickup resistance properties,Material should be applied(Dilution,Recoating Period etc...) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1 ltr minute and pressure of 3300 PSI.Camouflage/colour pattern decide by the user.Note:a) The above specification is guaranteed for 4 years Performance Warranty.b) Rate of Removing of vegitation/plantation up to height of 7Mtr deemed to be included in the rate coated by contractor.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster all as specified and directed.

M&L Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by using vacum based sanding maching to remove all smoke dust,moulds,moss and efflorescent salts and removing oily and greasy spots etc applying one coat of distemper oil emulsion of shade as approved by Engr-in-charge with auto paint roller on old surfaces of walls all as specified and directed. Note- Surface to be made even and smooth by filling the depression if any.

Applying 2mm thick white putty on wall surfaces and rubbing the surface even and smooth all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for